Re: [PATCH v3] Serial: silabs si4455 serial driver

[Rob Herring <robh@kernel.org>]

On Fri, 11 Dec 2020 19:31:27 +0000, József Horváth wrote:
> This is a serial port driver for
>  Silicon Labs Si4455 Sub-GHz transciver.
> 
> The goal of this driver is to removing wires
>  between central(linux) device and remote serial devices/sensors,
>  but keeping the original user software.
>  It represents regular serial interface for the user space.
> 
> Datasheet: https://www.silabs.com/documents/public/data-sheets/Si4455.pdf
> 
> Signed-off-by: József Horváth <info@ministro.hu>
> ---
>  .../staging/serial/silabs,si4455.yaml         |   98 ++
>  MAINTAINERS                                   |    7 +
>  drivers/tty/serial/Kconfig                    |    8 +
>  drivers/tty/serial/Makefile                   |    1 +
>  drivers/tty/serial/si4455.c                   | 1328 +++++++++++++++++
>  5 files changed, 1442 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/staging/serial/silabs,si4455.yaml
>  create mode 100644 drivers/tty/serial/si4455.c
> 


My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/staging/serial/silabs,si4455.yaml: $id: relative path/filename doesn't match actual path or filename
	expected: http://devicetree.org/schemas/staging/serial/silabs,si4455.yaml#


See https://patchwork.ozlabs.org/patch/1415258

The base for the patch is generally the last rc1. Any dependencies
should be noted.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.