From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: Tobias Waldekranz <tobias@waldekranz.com>,
"David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
netdev@vger.kernel.org, UNGLinuxDriver@microchip.com,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Vivien Didelot <vivien.didelot@gmail.com>,
Claudiu Manoil <claudiu.manoil@nxp.com>
Subject: Re: [RFC PATCH net-next 08/16] net: mscc: ocelot: avoid unneeded "lp" variable in LAG join
Date: Tue, 15 Dec 2020 17:47:56 +0100 [thread overview]
Message-ID: <20201215164756.GL1781038@piout.net> (raw)
In-Reply-To: <20201208120802.1268708-9-vladimir.oltean@nxp.com>
On 08/12/2020 14:07:54+0200, Vladimir Oltean wrote:
> The index of the LAG is equal to the logical port ID that all the
> physical port members have, which is further equal to the index of the
> first physical port that is a member of the LAG.
>
> The code gets a bit carried away with logic like this:
>
> if (a == b)
> c = a;
> else
> c = b;
>
> which can be simplified, of course, into:
>
> c = b;
>
> (with a being port, b being lp, c being lag)
>
> This further makes the "lp" variable redundant, since we can use "lag"
> everywhere where "lp" (logical port) was used. So instead of a "c = b"
> assignment, we can do a complete deletion of b. Only one comment here:
>
> if (bond_mask) {
> lp = __ffs(bond_mask);
> ocelot->lags[lp] = 0;
> }
>
> lp was clobbered before, because it was used as a temporary variable to
> hold the new smallest port ID from the bond. Now that we don't have "lp"
> any longer, we'll just avoid the temporary variable and zeroize the
> bonding mask directly.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
> drivers/net/ethernet/mscc/ocelot.c | 16 ++++++----------
> 1 file changed, 6 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
> index 30dee1f957d1..080fd4ce37ea 100644
> --- a/drivers/net/ethernet/mscc/ocelot.c
> +++ b/drivers/net/ethernet/mscc/ocelot.c
> @@ -1291,28 +1291,24 @@ int ocelot_port_lag_join(struct ocelot *ocelot, int port,
> struct net_device *bond)
> {
> u32 bond_mask = 0;
> - int lag, lp;
> + int lag;
>
> ocelot->ports[port]->bond = bond;
>
> bond_mask = ocelot_get_bond_mask(ocelot, bond);
>
> - lp = __ffs(bond_mask);
> + lag = __ffs(bond_mask);
>
> /* If the new port is the lowest one, use it as the logical port from
> * now on
> */
> - if (port == lp) {
> - lag = port;
> + if (port == lag) {
> ocelot->lags[port] = bond_mask;
> bond_mask &= ~BIT(port);
> - if (bond_mask) {
> - lp = __ffs(bond_mask);
> - ocelot->lags[lp] = 0;
> - }
> + if (bond_mask)
> + ocelot->lags[__ffs(bond_mask)] = 0;
> } else {
> - lag = lp;
> - ocelot->lags[lp] |= BIT(port);
> + ocelot->lags[lag] |= BIT(port);
> }
>
> ocelot_setup_lag(ocelot, lag);
> --
> 2.25.1
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2020-12-15 16:49 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-08 12:07 [RFC PATCH net-next 00/16] LAG offload for Ocelot DSA switches Vladimir Oltean
2020-12-08 12:07 ` [RFC PATCH net-next 01/16] net: mscc: ocelot: offload bridge port flags to device Vladimir Oltean
2020-12-15 14:37 ` Alexandre Belloni
2020-12-08 12:07 ` [RFC PATCH net-next 02/16] net: mscc: ocelot: allow offloading of bridge on top of LAG Vladimir Oltean
2020-12-15 14:43 ` Alexandre Belloni
2020-12-08 12:07 ` [RFC PATCH net-next 03/16] net: mscc: ocelot: rename ocelot_netdevice_port_event to ocelot_netdevice_changeupper Vladimir Oltean
2020-12-15 15:01 ` Alexandre Belloni
2020-12-15 15:27 ` Vladimir Oltean
2020-12-08 12:07 ` [RFC PATCH net-next 04/16] net: mscc: ocelot: use a switch-case statement in ocelot_netdevice_event Vladimir Oltean
2020-12-15 15:52 ` Alexandre Belloni
2020-12-15 15:56 ` Alexandre Belloni
2020-12-08 12:07 ` [RFC PATCH net-next 05/16] net: mscc: ocelot: don't refuse bonding interfaces we can't offload Vladimir Oltean
2020-12-15 15:56 ` Alexandre Belloni
2020-12-08 12:07 ` [RFC PATCH net-next 06/16] net: mscc: ocelot: use ipv6 in the aggregation code Vladimir Oltean
2020-12-15 16:03 ` Alexandre Belloni
2020-12-08 12:07 ` [RFC PATCH net-next 07/16] net: mscc: ocelot: set up the bonding mask in a way that avoids a net_device Vladimir Oltean
2020-12-15 16:36 ` Alexandre Belloni
2020-12-08 12:07 ` [RFC PATCH net-next 08/16] net: mscc: ocelot: avoid unneeded "lp" variable in LAG join Vladimir Oltean
2020-12-15 16:47 ` Alexandre Belloni [this message]
2020-12-08 12:07 ` [RFC PATCH net-next 09/16] net: mscc: ocelot: use "lag" variable name in ocelot_bridge_stp_state_set Vladimir Oltean
2020-12-15 16:49 ` Alexandre Belloni
2020-12-08 12:07 ` [RFC PATCH net-next 10/16] net: mscc: ocelot: reapply bridge forwarding mask on bonding join/leave Vladimir Oltean
2020-12-16 12:29 ` Alexandre Belloni
2020-12-08 12:07 ` [RFC PATCH net-next 11/16] net: mscc: ocelot: set up logical port IDs centrally Vladimir Oltean
2020-12-16 20:15 ` Alexandre Belloni
2020-12-08 12:07 ` [RFC PATCH net-next 12/16] net: mscc: ocelot: drop the use of the "lags" array Vladimir Oltean
2020-12-16 21:29 ` Alexandre Belloni
2021-01-15 11:05 ` Vladimir Oltean
2021-01-15 12:02 ` Alexandre Belloni
2020-12-08 12:07 ` [RFC PATCH net-next 13/16] net: mscc: ocelot: rename aggr_count to num_ports_in_lag Vladimir Oltean
2020-12-16 21:31 ` Alexandre Belloni
2020-12-08 12:08 ` [RFC PATCH net-next 14/16] net: mscc: ocelot: rebalance LAGs on link up/down events Vladimir Oltean
2020-12-16 21:32 ` Alexandre Belloni
2020-12-08 12:08 ` [RFC PATCH net-next 15/16] net: dsa: felix: propagate the LAG offload ops towards the ocelot lib Vladimir Oltean
2020-12-08 23:18 ` kernel test robot
2020-12-08 12:08 ` [RFC PATCH net-next 16/16] net: dsa: ocelot: tell DSA that we can offload link aggregation Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201215164756.GL1781038@piout.net \
--to=alexandre.belloni@bootlin.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=tobias@waldekranz.com \
--cc=vivien.didelot@gmail.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.