From: Bean Huo <huobean@gmail.com>
To: alim.akhtar@samsung.com, avri.altman@wdc.com,
asutoshd@codeaurora.org, jejb@linux.ibm.com,
martin.petersen@oracle.com, stanley.chu@mediatek.com,
beanhuo@micron.com, bvanassche@acm.org, tomas.winkler@intel.com,
cang@codeaurora.org
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5 1/7] scsi: ufs: Add "wb_on" sysfs node to control WB on/off
Date: Wed, 16 Dec 2020 00:05:13 +0100 [thread overview]
Message-ID: <20201215230519.15158-2-huobean@gmail.com> (raw)
In-Reply-To: <20201215230519.15158-1-huobean@gmail.com>
From: Bean Huo <beanhuo@micron.com>
Currently UFS WriteBooster driver uses clock scaling up/down to set
WB on/off, for the platform which doesn't support UFSHCD_CAP_CLK_SCALING,
WB will be always on. Provide a sysfs attribute to enable/disable WB
during runtime. Write 1/0 to "wb_on" sysfs node to enable/disable UFS WB.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
---
drivers/scsi/ufs/ufs-sysfs.c | 41 ++++++++++++++++++++++++++++++++++++
drivers/scsi/ufs/ufshcd.c | 3 +--
drivers/scsi/ufs/ufshcd.h | 2 ++
3 files changed, 44 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
index 08e72b7eef6a..f3ca3d6b82c4 100644
--- a/drivers/scsi/ufs/ufs-sysfs.c
+++ b/drivers/scsi/ufs/ufs-sysfs.c
@@ -189,6 +189,45 @@ static ssize_t auto_hibern8_store(struct device *dev,
return count;
}
+static ssize_t wb_on_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%d\n", hba->wb_enabled);
+}
+
+static ssize_t wb_on_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ unsigned int wb_enable;
+ ssize_t res;
+
+ if (ufshcd_is_clkscaling_supported(hba)) {
+ /*
+ * If the platform supports UFSHCD_CAP_CLK_SCALING, turn WB
+ * on/off will be done while clock scaling up/down.
+ */
+ dev_warn(dev, "To control WB through wb_on is not allowed!\n");
+ return -EOPNOTSUPP;
+ }
+ if (!ufshcd_is_wb_allowed(hba))
+ return -EOPNOTSUPP;
+
+ if (kstrtouint(buf, 0, &wb_enable))
+ return -EINVAL;
+
+ if (wb_enable != 0 && wb_enable != 1)
+ return -EINVAL;
+
+ pm_runtime_get_sync(hba->dev);
+ res = ufshcd_wb_ctrl(hba, wb_enable);
+ pm_runtime_put_sync(hba->dev);
+
+ return res < 0 ? res : count;
+}
+
static DEVICE_ATTR_RW(rpm_lvl);
static DEVICE_ATTR_RO(rpm_target_dev_state);
static DEVICE_ATTR_RO(rpm_target_link_state);
@@ -196,6 +235,7 @@ static DEVICE_ATTR_RW(spm_lvl);
static DEVICE_ATTR_RO(spm_target_dev_state);
static DEVICE_ATTR_RO(spm_target_link_state);
static DEVICE_ATTR_RW(auto_hibern8);
+static DEVICE_ATTR_RW(wb_on);
static struct attribute *ufs_sysfs_ufshcd_attrs[] = {
&dev_attr_rpm_lvl.attr,
@@ -205,6 +245,7 @@ static struct attribute *ufs_sysfs_ufshcd_attrs[] = {
&dev_attr_spm_target_dev_state.attr,
&dev_attr_spm_target_link_state.attr,
&dev_attr_auto_hibern8.attr,
+ &dev_attr_wb_on.attr,
NULL
};
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index e221add25a7e..5e1dcf4de67e 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -246,7 +246,6 @@ static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba,
static int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag);
static int ufshcd_wb_buf_flush_enable(struct ufs_hba *hba);
static int ufshcd_wb_buf_flush_disable(struct ufs_hba *hba);
-static int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable);
static int ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set);
static inline void ufshcd_wb_toggle_flush(struct ufs_hba *hba, bool enable);
static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba);
@@ -5351,7 +5350,7 @@ static void ufshcd_bkops_exception_event_handler(struct ufs_hba *hba)
__func__, err);
}
-static int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable)
+int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable)
{
int ret;
u8 index;
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 9bb5f0ed4124..2a97006a2c93 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -1068,6 +1068,8 @@ int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba,
u8 *desc_buff, int *buff_len,
enum query_opcode desc_op);
+int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable);
+
/* Wrapper functions for safely calling variant operations */
static inline const char *ufshcd_get_var_name(struct ufs_hba *hba)
{
--
2.17.1
next prev parent reply other threads:[~2020-12-16 0:08 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-15 23:05 [PATCH v5 0/7] Several changes for UFS WriteBooster Bean Huo
2020-12-15 23:05 ` Bean Huo [this message]
2020-12-22 6:08 ` [PATCH v5 1/7] scsi: ufs: Add "wb_on" sysfs node to control WB on/off Stanley Chu
2020-12-22 6:12 ` Can Guo
2020-12-22 20:57 ` Bean Huo
2020-12-22 22:11 ` Bean Huo
2020-12-23 1:31 ` Can Guo
2020-12-23 8:28 ` Bean Huo
2020-12-23 8:30 ` Bean Huo
2020-12-23 9:11 ` Bean Huo
2020-12-22 20:50 ` Bean Huo
2020-12-22 21:08 ` Bean Huo
2020-12-23 21:52 ` Bean Huo
2020-12-15 23:05 ` [PATCH v5 2/7] docs: ABI: Add wb_on documentation for UFS sysfs Bean Huo
2020-12-15 23:05 ` [PATCH v5 3/7] scsi: ufs: Changes comment in the function ufshcd_wb_probe() Bean Huo
2020-12-15 23:05 ` [PATCH v5 4/7] scsi: ufs: Remove two WB related fields from struct ufs_dev_info Bean Huo
2020-12-16 4:15 ` Stanley Chu
2020-12-15 23:05 ` [PATCH v5 5/7] scsi: ufs: Group UFS WB related flags to " Bean Huo
2020-12-16 4:16 ` Stanley Chu
2020-12-22 6:14 ` Can Guo
2020-12-15 23:05 ` [PATCH v5 6/7] scsi: ufs: Cleanup WB buffer flush toggle implementation Bean Huo
2020-12-16 4:17 ` Stanley Chu
2020-12-22 6:14 ` Can Guo
2020-12-15 23:05 ` [PATCH v5 7/7] scsi: ufs: Keep device active mode only fWriteBoosterBufferFlushDuringHibernate == 1 Bean Huo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201215230519.15158-2-huobean@gmail.com \
--to=huobean@gmail.com \
--cc=alim.akhtar@samsung.com \
--cc=asutoshd@codeaurora.org \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=bvanassche@acm.org \
--cc=cang@codeaurora.org \
--cc=jejb@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=stanley.chu@mediatek.com \
--cc=tomas.winkler@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.