All of lore.kernel.org
 help / color / mirror / Atom feed
From: beilei.xing@intel.com
To: jia.guo@intel.com, dev@dpdk.org
Cc: Beilei Xing <beilei.xing@intel.com>,
	stable@dpdk.org, Chenmin Sun <chenmin.sun@intel.com>
Subject: [dpdk-dev] [PATCH v3] net/i40e: fix flex payload rule conflict issue
Date: Fri,  1 Jan 2021 12:03:41 +0800	[thread overview]
Message-ID: <20210101040341.21133-1-beilei.xing@intel.com> (raw)
In-Reply-To: <20201229054639.92132-1-beilei.xing@intel.com>

From: Beilei Xing <beilei.xing@intel.com>

With the following commands, the second flow can't
be created successfully.

1. flow create 0 ingress pattern eth / ipv4 / udp /
   raw relative is 1 pattern is 0102030405 / end
   actions drop / end
2. flow destroy 0 rule 0
3. flow create 0 ingress pattern eth / ipv4 / udp /
   raw relative is 1 pattern is 010203040506 / end
   actions drop / end

The root cause is that a flag for flex pit isn't reset.

Fixes: 6ced3dd72f5f ("net/i40e: support flexible payload parsing for FDIR")
Cc: stable@dpdk.org

Reported-by: Chenmin Sun<chenmin.sun@intel.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
---

v3 changes:
 - Add flow count for flexible payload flow.
v2 changeds:
 - Add fix line.

 drivers/net/i40e/i40e_ethdev.h |  3 +++
 drivers/net/i40e/i40e_fdir.c   | 16 ++++++++++++++--
 drivers/net/i40e/i40e_flow.c   |  4 ++++
 3 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index 696c5aaf7e..aac226999c 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -636,6 +636,7 @@ struct i40e_fdir_flow_ext {
 	bool is_udp; /* ipv4|ipv6 udp flow */
 	enum i40e_flxpld_layer_idx layer_idx;
 	struct i40e_fdir_flex_pit flex_pit[I40E_MAX_FLXPLD_LAYER * I40E_MAX_FLXPLD_FIED];
+	bool is_flex_flow;
 };
 
 /* A structure used to define the input for a flow director filter entry */
@@ -784,6 +785,8 @@ struct i40e_fdir_info {
 	bool flex_mask_flag[I40E_FILTER_PCTYPE_MAX];
 
 	bool inset_flag[I40E_FILTER_PCTYPE_MAX]; /* Mark if input set is set */
+
+	uint32_t flex_flow_count[I40E_MAX_FLXPLD_LAYER];
 };
 
 /* Ethertype filter number HW supports */
diff --git a/drivers/net/i40e/i40e_fdir.c b/drivers/net/i40e/i40e_fdir.c
index 50c0eee9f2..4400b607c8 100644
--- a/drivers/net/i40e/i40e_fdir.c
+++ b/drivers/net/i40e/i40e_fdir.c
@@ -355,6 +355,7 @@ i40e_init_flx_pld(struct i40e_pf *pf)
 			I40E_PRTQF_FLX_PIT(index + 1), 0x0000FC29);/*non-used*/
 		I40E_WRITE_REG(hw,
 			I40E_PRTQF_FLX_PIT(index + 2), 0x0000FC2A);/*non-used*/
+		pf->fdir.flex_pit_flag[i] = 0;
 	}
 
 	/* initialize the masks */
@@ -1513,8 +1514,6 @@ i40e_flow_set_fdir_flex_pit(struct i40e_pf *pf,
 		I40E_WRITE_REG(hw, I40E_PRTQF_FLX_PIT(field_idx), flx_pit);
 		min_next_off++;
 	}
-
-	pf->fdir.flex_pit_flag[layer_idx] = 1;
 }
 
 static int
@@ -1738,6 +1737,8 @@ i40e_flow_add_del_fdir_filter(struct rte_eth_dev *dev,
 				fdir_info->fdir_guarantee_free_space > 0)
 			wait_status = false;
 	} else {
+		layer_idx = filter->input.flow_ext.layer_idx;
+
 		node = i40e_sw_fdir_filter_lookup(fdir_info,
 				&check_filter.fdir.input);
 		if (!node) {
@@ -1785,6 +1786,17 @@ i40e_flow_add_del_fdir_filter(struct rte_eth_dev *dev,
 		goto error_op;
 	}
 
+	if (filter->input.flow_ext.is_flex_flow) {
+		if (add) {
+			fdir_info->flex_flow_count[layer_idx]++;
+			pf->fdir.flex_pit_flag[layer_idx] = 1;
+		} else {
+			fdir_info->flex_flow_count[layer_idx]--;
+			if (!fdir_info->flex_flow_count[layer_idx])
+				pf->fdir.flex_pit_flag[layer_idx] = 0;
+		}
+	}
+
 	if (add) {
 		fdir_info->fdir_actual_cnt++;
 		if (fdir_info->fdir_invalprio == 1 &&
diff --git a/drivers/net/i40e/i40e_flow.c b/drivers/net/i40e/i40e_flow.c
index b09ff6590d..bbd666b7a0 100644
--- a/drivers/net/i40e/i40e_flow.c
+++ b/drivers/net/i40e/i40e_flow.c
@@ -3069,6 +3069,7 @@ i40e_flow_parse_fdir_pattern(struct rte_eth_dev *dev,
 			       &flex_pit, sizeof(struct i40e_fdir_flex_pit));
 			filter->input.flow_ext.layer_idx = layer_idx;
 			filter->input.flow_ext.raw_id = raw_id;
+			filter->input.flow_ext.is_flex_flow = true;
 			break;
 		case RTE_FLOW_ITEM_TYPE_VF:
 			vf_spec = item->spec;
@@ -5515,6 +5516,9 @@ i40e_flow_flush_fdir_filter(struct i40e_pf *pf)
 			pf->fdir.flex_mask_flag[pctype] = 0;
 		}
 
+		for (i = 0; i < I40E_MAX_FLXPLD_LAYER; i++)
+			pf->fdir.flex_pit_flag[i] = 0;
+
 		/* Disable FDIR processing as all FDIR rules are now flushed */
 		i40e_fdir_rx_proc_enable(dev, 0);
 	}
-- 
2.26.2


  parent reply	other threads:[~2020-12-31  4:11 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-29  5:46 [dpdk-dev] [PATCH] net/i40e: fix flex payload rule conflict issue beilei.xing
2020-12-29  6:17 ` [dpdk-dev] [PATCH v2] " beilei.xing
2020-12-28  7:15   ` Guo, Jia
2021-01-01  4:03 ` beilei.xing [this message]
2020-12-31  6:07   ` [dpdk-dev] [PATCH v3] " Guo, Jia
2021-01-05  2:36     ` Xing, Beilei
2021-01-05  3:12 ` [dpdk-dev] [PATCH v5] " beilei.xing
2021-01-05  3:39   ` Guo, Jia
2021-01-05 12:33     ` Zhang, Qi Z
2021-01-06  2:51 ` [dpdk-dev] [PATCH v4] " beilei.xing

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210101040341.21133-1-beilei.xing@intel.com \
    --to=beilei.xing@intel.com \
    --cc=chenmin.sun@intel.com \
    --cc=dev@dpdk.org \
    --cc=jia.guo@intel.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.