Re: [PATCH v2 10/18] ARM: dts: qcom: sdx55: Add QPIC NAND support

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Tue, Jan 05, 2021 at 09:21:02PM +0530, Vinod Koul wrote:
> On 05-01-21, 17:56, Manivannan Sadhasivam wrote:
> > Add qpic_nand node to support QPIC NAND controller on SDX55 platform.
> > Since there is no "aon" clock in SDX55, a dummy clock is provided.
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  arch/arm/boot/dts/qcom-sdx55.dtsi | 22 ++++++++++++++++++++++
> >  1 file changed, 22 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
> > index 1b9b990ad0a2..1a6947753972 100644
> > --- a/arch/arm/boot/dts/qcom-sdx55.dtsi
> > +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
> > @@ -41,6 +41,12 @@ pll_test_clk: pll-test-clk {
> >  			#clock-cells = <0>;
> >  			clock-frequency = <400000000>;
> >  		};
> > +
> > +		nand_clk_dummy: nand-clk-dummy {
> 
> Why dummy..? 

There is no such clock used on this platform but the driver requires it.

> > +			compatible = "fixed-clock";
> > +			#clock-cells = <0>;
> > +			clock-frequency = <32000>;
> 
> Is this sleep clock of platform..?
> 

Always ON (AON) clock.

Thanks,
Mani