From: "Christopher M. Riedl" <cmr@codefail.de>
To: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v3 1/8] powerpc/uaccess: Add unsafe_copy_from_user
Date: Fri, 8 Jan 2021 21:25:50 -0600 [thread overview]
Message-ID: <20210109032557.13831-2-cmr@codefail.de> (raw)
In-Reply-To: <20210109032557.13831-1-cmr@codefail.de>
Implement raw_copy_from_user_allowed() which assumes that userspace read
access is open. Use this new function to implement raw_copy_from_user().
Finally, wrap the new function to follow the usual "unsafe_" convention
of taking a label argument.
The new raw_copy_from_user_allowed() calls non-inline __copy_tofrom_user()
internally. This is still safe to call inside user access blocks formed
with user_*_access_begin()/user_*_access_end() since asm functions are not
instrumented for tracing.
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
---
arch/powerpc/include/asm/uaccess.h | 28 +++++++++++++++++++---------
1 file changed, 19 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 501c9a79038c..698f3a6d6ae5 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -403,38 +403,45 @@ raw_copy_in_user(void __user *to, const void __user *from, unsigned long n)
}
#endif /* __powerpc64__ */
-static inline unsigned long raw_copy_from_user(void *to,
- const void __user *from, unsigned long n)
+static inline unsigned long
+raw_copy_from_user_allowed(void *to, const void __user *from, unsigned long n)
{
- unsigned long ret;
if (__builtin_constant_p(n) && (n <= 8)) {
- ret = 1;
+ unsigned long ret = 1;
switch (n) {
case 1:
barrier_nospec();
- __get_user_size(*(u8 *)to, from, 1, ret);
+ __get_user_size_allowed(*(u8 *)to, from, 1, ret);
break;
case 2:
barrier_nospec();
- __get_user_size(*(u16 *)to, from, 2, ret);
+ __get_user_size_allowed(*(u16 *)to, from, 2, ret);
break;
case 4:
barrier_nospec();
- __get_user_size(*(u32 *)to, from, 4, ret);
+ __get_user_size_allowed(*(u32 *)to, from, 4, ret);
break;
case 8:
barrier_nospec();
- __get_user_size(*(u64 *)to, from, 8, ret);
+ __get_user_size_allowed(*(u64 *)to, from, 8, ret);
break;
}
if (ret == 0)
return 0;
}
+ return __copy_tofrom_user((__force void __user *)to, from, n);
+}
+
+static inline unsigned long
+raw_copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ unsigned long ret;
+
barrier_nospec();
allow_read_from_user(from, n);
- ret = __copy_tofrom_user((__force void __user *)to, from, n);
+ ret = raw_copy_from_user_allowed(to, from, n);
prevent_read_from_user(from, n);
return ret;
}
@@ -542,6 +549,9 @@ user_write_access_begin(const void __user *ptr, size_t len)
#define unsafe_get_user(x, p, e) unsafe_op_wrap(__get_user_allowed(x, p), e)
#define unsafe_put_user(x, p, e) __put_user_goto(x, p, e)
+#define unsafe_copy_from_user(d, s, l, e) \
+ unsafe_op_wrap(raw_copy_from_user_allowed(d, s, l), e)
+
#define unsafe_copy_to_user(d, s, l, e) \
do { \
u8 __user *_dst = (u8 __user *)(d); \
--
2.26.1
next prev parent reply other threads:[~2021-01-09 3:37 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-09 3:25 [PATCH v3 0/8] Improve signal performance on PPC64 with KUAP Christopher M. Riedl
2021-01-09 3:25 ` Christopher M. Riedl [this message]
2021-01-11 13:22 ` [PATCH v3 1/8] powerpc/uaccess: Add unsafe_copy_from_user Christophe Leroy
2021-01-17 17:19 ` Christopher M. Riedl
2021-01-19 2:11 ` Michael Ellerman
2021-01-19 12:33 ` Christophe Leroy
2021-01-19 17:02 ` Christopher M. Riedl
2021-01-19 17:27 ` Christophe Leroy
2021-01-20 5:08 ` Christopher M. Riedl
2021-02-09 14:09 ` Christophe Leroy
2021-01-19 7:29 ` Christophe Leroy
2021-01-09 3:25 ` [PATCH v3 2/8] powerpc/signal: Add unsafe_copy_{vsx,fpr}_from_user() Christopher M. Riedl
2021-01-09 3:25 ` [PATCH v3 3/8] powerpc/signal64: Move non-inline functions out of setup_sigcontext() Christopher M. Riedl
2021-01-09 3:25 ` [PATCH v3 4/8] powerpc/signal64: Remove TM ifdefery in middle of if/else block Christopher M. Riedl
2021-01-11 13:29 ` Christophe Leroy
2021-01-17 17:16 ` Christopher M. Riedl
2021-01-09 3:25 ` [PATCH v3 5/8] powerpc/signal64: Replace setup_sigcontext() w/ unsafe_setup_sigcontext() Christopher M. Riedl
2021-01-09 3:25 ` [PATCH v3 6/8] powerpc/signal64: Replace restore_sigcontext() w/ unsafe_restore_sigcontext() Christopher M. Riedl
2021-01-09 3:25 ` [PATCH v3 7/8] powerpc/signal64: Rewrite handle_rt_signal64() to minimise uaccess switches Christopher M. Riedl
2021-01-09 3:25 ` [PATCH v3 8/8] powerpc/signal64: Rewrite rt_sigreturn() " Christopher M. Riedl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210109032557.13831-2-cmr@codefail.de \
--to=cmr@codefail.de \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.