From: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
To: marcel@holtmann.org, johan.hedberg@gmail.com, luiz.dentz@gmail.com
Cc: davem@davemloft.net, kuba@kernel.org,
linux-bluetooth@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] Bluetooth: btusb: fix memory leak on suspend and resume
Date: Thu, 14 Jan 2021 15:28:57 +0530 [thread overview]
Message-ID: <20210114095853.GA1650@cosmos> (raw)
kmemleak report:
unreferenced object 0xffff9b1127f00500 (size 208):
comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 60 ed 05 11 9b ff ff 00 00 00 00 00 00 00 00 .`..............
backtrace:
[<000000006ab3fd59>] kmem_cache_alloc_node+0x17a/0x480
[<0000000051a5f6f9>] __alloc_skb+0x5b/0x1d0
[<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth]
[<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth]
[<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth]
[<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth]
[<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth]
[<000000002677dd79>] process_one_work+0x209/0x3b0
[<00000000aaa62b07>] worker_thread+0x34/0x400
[<00000000826d176c>] kthread+0x126/0x140
[<000000002305e558>] ret_from_fork+0x22/0x30
unreferenced object 0xffff9b1125c6ee00 (size 512):
comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s)
hex dump (first 32 bytes):
04 00 00 00 0d 00 00 00 05 0c 01 00 11 9b ff ff ................
00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
backtrace:
[<000000009f07c0cc>] slab_post_alloc_hook+0x59/0x270
[<0000000049431dc2>] __kmalloc_node_track_caller+0x15f/0x330
[<00000000027a42f6>] __kmalloc_reserve.isra.70+0x31/0x90
[<00000000e8e3e76a>] __alloc_skb+0x87/0x1d0
[<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth]
[<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth]
[<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth]
[<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth]
[<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth]
[<000000002677dd79>] process_one_work+0x209/0x3b0
[<00000000aaa62b07>] worker_thread+0x34/0x400
[<00000000826d176c>] kthread+0x126/0x140
[<000000002305e558>] ret_from_fork+0x22/0x30
unreferenced object 0xffff9b112b395788 (size 8):
comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s)
hex dump (first 8 bytes):
20 00 00 00 00 00 04 00 .......
backtrace:
[<0000000052dc28d2>] kmem_cache_alloc_trace+0x15e/0x460
[<0000000046147591>] alloc_ctrl_urb+0x52/0xe0 [btusb]
[<00000000a2ed3e9e>] btusb_send_frame+0x91/0x100 [btusb]
[<000000001e66030e>] hci_send_frame+0x7e/0xf0 [bluetooth]
[<00000000bf6b7269>] hci_cmd_work+0xc5/0x130 [bluetooth]
[<000000002677dd79>] process_one_work+0x209/0x3b0
[<00000000aaa62b07>] worker_thread+0x34/0x400
[<00000000826d176c>] kthread+0x126/0x140
[<000000002305e558>] ret_from_fork+0x22/0x30
In pm sleep-resume context, while the btusb device rebinds, it enters
hci_unregister_dev(), whilst there is a possibility of hdev receiving
PM_POST_SUSPEND suspend_notifier event, leading to generation of msg
frames. When hci_unregister_dev() completes, i.e. hdev context is
destroyed/freed, those intermittently sent msg frames cause memory
leak.
BUG details:
Below is stack trace of thread that enters hci_unregister_dev(), marks
the hdev flag HCI_UNREGISTER to 1, and then goes onto to wait on notifier
lock - refer unregister_pm_notifier().
hci_unregister_dev+0xa5/0x320 [bluetoot]
btusb_disconnect+0x68/0x150 [btusb]
usb_unbind_interface+0x77/0x250
? kernfs_remove_by_name_ns+0x75/0xa0
device_release_driver_internal+0xfe/0x1
device_release_driver+0x12/0x20
bus_remove_device+0xe1/0x150
device_del+0x192/0x3e0
? usb_remove_ep_devs+0x1f/0x30
usb_disable_device+0x92/0x1b0
usb_disconnect+0xc2/0x270
hub_event+0x9f6/0x15d0
? rpm_idle+0x23/0x360
? rpm_idle+0x26b/0x360
process_one_work+0x209/0x3b0
worker_thread+0x34/0x400
? process_one_work+0x3b0/0x3b0
kthread+0x126/0x140
? kthread_park+0x90/0x90
ret_from_fork+0x22/0x30
Below is stack trace of thread executing hci_suspend_notifier() which
processes the PM_POST_SUSPEND event, while the unbinding thread is
waiting on lock.
hci_suspend_notifier.cold.39+0x5/0x2b [bluetooth]
blocking_notifier_call_chain+0x69/0x90
pm_notifier_call_chain+0x1a/0x20
pm_suspend.cold.9+0x334/0x352
state_store+0x84/0xf0
kobj_attr_store+0x12/0x20
sysfs_kf_write+0x3b/0x40
kernfs_fop_write+0xda/0x1c0
vfs_write+0xbb/0x250
ksys_write+0x61/0xe0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix hci_suspend_notifer(), not to act on events when flag HCI_UNREGISTER
is set.
Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
---
net/bluetooth/hci_core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 9d2c9a1c552f..29c88dbbc3fe 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3566,7 +3566,8 @@ static int hci_suspend_notifier(struct notifier_block *nb, unsigned long action,
}
/* Suspend notifier should only act on events when powered. */
- if (!hdev_is_powered(hdev))
+ if (!hdev_is_powered(hdev) ||
+ !hci_dev_test_flag(hdev, HCI_UNREGISTER))
goto done;
if (action == PM_SUSPEND_PREPARE) {
--
2.17.1
next reply other threads:[~2021-01-14 10:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-14 9:58 Vamshi K Sthambamkadi [this message]
2021-01-14 10:46 ` Bluetooth: btusb: fix memory leak on suspend and resume bluez.test.bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210114095853.GA1650@cosmos \
--to=vamshi.k.sthambamkadi@gmail.com \
--cc=davem@davemloft.net \
--cc=johan.hedberg@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=marcel@holtmann.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.