[dpdk-dev] [PATCH v7 9/9] doc: update GENEVE TLV option support

[Shiri Kuzin <shirik@nvidia.com>]

GENEVE TLV option support added to mlx5 PMD.

The limitations and support were updated in
documentation.

Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
---
 doc/guides/nics/mlx5.rst               | 26 +++++++++++++++++++++++++-
 doc/guides/rel_notes/release_21_02.rst |  5 +++++
 2 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index db0c8b6c20..17f9f49e83 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -98,7 +98,11 @@ Features
 - Hardware LRO.
 - Hairpin.
 - Multiple-thread flow insertion.
+<<<<<<< HEAD
 - Matching on GTP extension header with raw encap/decap action.
+=======
+- Matching on Geneve TLV option header with raw encap/decap action.
+>>>>>>> a2594fbf3c... doc: update GENEVE TLV option support
 
 Limitations
 -----------
@@ -186,7 +190,18 @@ Limitations
      - OAM
      - protocol type
      - options length
-       Currently, the only supported options length value is 0.
+
+- Match on Geneve TLv option is supported on the following fields:
+     - Class
+     - Type
+     - Length
+     - Data
+
+  Only one Class/Type/Length Geneve TLV option is supported per shared device.
+  Class/Type/Length fields must be specified as well as masks.
+  Class/Type/Length specified masks must be full.
+  Matching Geneve TLV option without specifying data is not supported.
+  Matching Geneve TLV option with data & mask == 0 is not supported.
 
 - VF: flow rules created on VF devices can only match traffic targeted at the
   configured MAC addresses (see ``rte_eth_dev_mac_addr_add()``).
@@ -1019,6 +1034,10 @@ Below are some firmware configurations listed.
    or
    FLEX_PARSER_PROFILE_ENABLE=1
 
+- enable Geneve TLV option flow matching::
+
+   FLEX_PARSER_PROFILE_ENABLE=0
+
 - enable GTP flow matching::
 
    FLEX_PARSER_PROFILE_ENABLE=3
@@ -1540,6 +1559,11 @@ Supported hardware offloads
    |                       | |  rdma-core 35 | | rdma-core 35  |
    |                       | |  ConnectX-6 Dx| | ConnectX-6 Dx |
    +-----------------------+-----------------+-----------------+
+   | Encapsulation         | | DPDK 21.02    | | DPDK 21.02    |
+   | GENEVE TLV option     | | OFED 5.2      | | OFED 5.2      |
+   |                       | | rdma-core 34  | | rdma-core 34  |
+   |                       | | ConnectX-6 Dx | | ConnectX-6 Dx |
+   +-----------------------+-----------------+-----------------+
 
 Notes for metadata
 ------------------
diff --git a/doc/guides/rel_notes/release_21_02.rst b/doc/guides/rel_notes/release_21_02.rst
index 3bb0b9a9ed..066547b6ad 100644
--- a/doc/guides/rel_notes/release_21_02.rst
+++ b/doc/guides/rel_notes/release_21_02.rst
@@ -68,6 +68,11 @@ New Features
   * Introduced basic support on Windows.
   * Added GTP PDU session container matching and raw encap/decap.
 
+* **Added GENEVE TLV option in rte_flow.**
+
+  Added support for matching GENEVE TLV option and raw encap/decap of GENEVE
+  TLV option.
+
 * **Updated GSO support.**
 
   * Added inner UDP/IPv4 support for VXLAN IPv4 GSO.
-- 
2.21.0