From: Bert Vermeulen <bert@biot.com>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Rob Herring <robh+dt@kernel.org>,
linux-mips@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Sander Vanheule <sander@svanheule.net>,
John Crispin <john@phrozen.org>,
Birger Koblitz <mail@birger-koblitz.de>
Cc: Bert Vermeulen <bert@biot.com>
Subject: [PATCH v4 0/5] Add support for Realtek RTL838x/RTL839x switch SoCs
Date: Tue, 19 Jan 2021 10:21:04 +0100 [thread overview]
Message-ID: <20210119092109.185282-1-bert@biot.com> (raw)
v4:
- Device tree bindings for SoC in separate patch.
- Removed ioremap.h, and declare physical address bases in device tree.
v3:
- all code removed, the base system is now only device tree files and docs
and some build config.
- ioremap.h restored to the v1 version, with hardcoded I/O ranges, since I
got flak on changing that as suggested. This brings it in line with other
systems in arch/mips/generic.
v2:
- Removed all new arch/mips/ code, using arch/mips/generic/ instead.
- Use device tree ranges instead of hardcoded addresses for ioremap.
- Moved IRQ driver to drivers/irqchip/
- Removed reset handling code, will be replaced by device tree config.
- All SoC family id code moved to new soc driver.
- Header moved to realtek/ instead of mach-realtek/
- As more of the base system now depends on device tree, a sample
dts for the Cisco SG220-26 switch is included. This will be further
filled out, and bindings documented, as drivers get merged.
Bert Vermeulen (5):
dt-bindings: mips: Add support for RTL83xx SoC series
Add support for Realtek RTL838x/RTL839x switch SoCs
MIPS: Add Realtek RTL838x/RTL839x support as generic MIPS system
dt-bindings: Add Cisco prefix to vendor list
mips: dts: Add support for Cisco SG220-26 switch
.../devicetree/bindings/mips/realtek-rtl.yaml | 24 ++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/mips/Kconfig | 31 ++++++++++
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/realtek/Makefile | 2 +
arch/mips/boot/dts/realtek/cisco_sg220-26.dts | 25 ++++++++
arch/mips/boot/dts/realtek/rtl838x.dtsi | 21 +++++++
arch/mips/boot/dts/realtek/rtl83xx.dtsi | 59 +++++++++++++++++++
8 files changed, 165 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mips/realtek-rtl.yaml
create mode 100644 arch/mips/boot/dts/realtek/Makefile
create mode 100644 arch/mips/boot/dts/realtek/cisco_sg220-26.dts
create mode 100644 arch/mips/boot/dts/realtek/rtl838x.dtsi
create mode 100644 arch/mips/boot/dts/realtek/rtl83xx.dtsi
--
2.25.1
next reply other threads:[~2021-01-19 14:21 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-19 9:21 Bert Vermeulen [this message]
2021-01-19 9:21 ` [PATCH v4 1/5] dt-bindings: mips: Add support for RTL83xx SoC series Bert Vermeulen
2021-01-19 9:21 ` [PATCH v4 2/5] Add support for Realtek RTL838x/RTL839x switch SoCs Bert Vermeulen
2021-01-19 9:21 ` [PATCH v4 3/5] MIPS: Add Realtek RTL838x/RTL839x support as generic MIPS system Bert Vermeulen
2021-01-19 9:21 ` [PATCH v4 4/5] dt-bindings: Add Cisco prefix to vendor list Bert Vermeulen
2021-01-20 15:50 ` Rob Herring
2021-01-19 9:21 ` [PATCH v4 5/5] mips: dts: Add support for Cisco SG220-26 switch Bert Vermeulen
2021-02-04 20:59 ` Thomas Bogendoerfer
2021-02-04 20:57 ` [PATCH v4 0/5] Add support for Realtek RTL838x/RTL839x switch SoCs Thomas Bogendoerfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210119092109.185282-1-bert@biot.com \
--to=bert@biot.com \
--cc=devicetree@vger.kernel.org \
--cc=john@phrozen.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=mail@birger-koblitz.de \
--cc=robh+dt@kernel.org \
--cc=sander@svanheule.net \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.