From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Nicolas Chauvet <kwizart@gmail.com>,
Matt Merhar <mattmerhar@protonmail.com>,
Peter Geis <pgwipeout@gmail.com>
Cc: linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 03/13] ARM: tegra: cardhu: Support CPU frequency and voltage scaling on all board variants
Date: Thu, 21 Jan 2021 21:22:58 +0300 [thread overview]
Message-ID: <20210121182308.16080-4-digetx@gmail.com> (raw)
In-Reply-To: <20210121182308.16080-1-digetx@gmail.com>
Enable CPU frequency and voltage scaling on all Tegra30 Cardhu board variants.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
arch/arm/boot/dts/tegra30-cardhu-a04.dts | 48 ------------------------
arch/arm/boot/dts/tegra30-cardhu.dtsi | 40 ++++++++++++++++++--
2 files changed, 37 insertions(+), 51 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
index c1c0ca628af1..a11028b8b67b 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
@@ -2,8 +2,6 @@
/dts-v1/;
#include "tegra30-cardhu.dtsi"
-#include "tegra30-cpu-opp.dtsi"
-#include "tegra30-cpu-opp-microvolt.dtsi"
/* This dts file support the cardhu A04 and later versions of board */
@@ -92,50 +90,4 @@ vdd_bl2_reg: regulator@106 {
enable-active-high;
gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
};
-
- i2c@7000d000 {
- pmic: tps65911@2d {
- regulators {
- vddctrl_reg: vddctrl {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1125000>;
- regulator-coupled-with = <&vddcore_reg>;
- regulator-coupled-max-spread = <300000>;
- regulator-max-step-microvolt = <100000>;
-
- nvidia,tegra-cpu-regulator;
- };
- };
- };
-
- vddcore_reg: tps62361@60 {
- regulator-coupled-with = <&vddctrl_reg>;
- regulator-coupled-max-spread = <300000>;
- regulator-max-step-microvolt = <100000>;
-
- nvidia,tegra-core-regulator;
- };
- };
-
- cpus {
- cpu0: cpu@0 {
- cpu-supply = <&vddctrl_reg>;
- operating-points-v2 = <&cpu0_opp_table>;
- };
-
- cpu@1 {
- cpu-supply = <&vddctrl_reg>;
- operating-points-v2 = <&cpu0_opp_table>;
- };
-
- cpu@2 {
- cpu-supply = <&vddctrl_reg>;
- operating-points-v2 = <&cpu0_opp_table>;
- };
-
- cpu@3 {
- cpu-supply = <&vddctrl_reg>;
- operating-points-v2 = <&cpu0_opp_table>;
- };
- };
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 788f16d2a0fa..309538bdcd66 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -1,6 +1,8 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/input/input.h>
#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
/**
* This file contains common DT entry for all fab version of Cardhu.
@@ -273,9 +275,14 @@ vdd2_reg: vdd2 {
vddctrl_reg: vddctrl {
regulator-name = "vdd_cpu,vdd_sys";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-coupled-with = <&vdd_core>;
+ regulator-coupled-max-spread = <300000>;
+ regulator-max-step-microvolt = <100000>;
regulator-always-on;
+
+ nvidia,tegra-cpu-regulator;
};
vio_reg: vio {
@@ -343,17 +350,22 @@ temperature-sensor@4c {
interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
};
- tps62361@60 {
+ vdd_core: tps62361@60 {
compatible = "ti,tps62361";
reg = <0x60>;
regulator-name = "tps62361-vout";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1500000>;
+ regulator-coupled-with = <&vddctrl_reg>;
+ regulator-coupled-max-spread = <300000>;
+ regulator-max-step-microvolt = <100000>;
regulator-boot-on;
regulator-always-on;
ti,vsel0-state-high;
ti,vsel1-state-high;
+
+ nvidia,tegra-core-regulator;
};
};
@@ -425,6 +437,28 @@ clk32k_in: clock@0 {
#clock-cells = <0>;
};
+ cpus {
+ cpu0: cpu@0 {
+ cpu-supply = <&vddctrl_reg>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu1: cpu@1 {
+ cpu-supply = <&vddctrl_reg>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu2: cpu@2 {
+ cpu-supply = <&vddctrl_reg>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu3: cpu@3 {
+ cpu-supply = <&vddctrl_reg>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+ };
+
panel: panel {
compatible = "chunghwa,claa101wb01";
ddc-i2c-bus = <&panelddc>;
--
2.29.2
next prev parent reply other threads:[~2021-01-21 18:27 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-21 18:22 [PATCH v1 00/13] NVIDIA Tegra ARM32 device-tree improvements Dmitry Osipenko
2021-01-21 18:22 ` [PATCH v1 01/13] ARM: tegra: ventana: Support CPU and Core voltage scaling Dmitry Osipenko
2021-01-21 18:22 ` [PATCH v1 02/13] ARM: tegra: ventana: Support CPU thermal throttling Dmitry Osipenko
2021-01-21 18:22 ` Dmitry Osipenko [this message]
2021-01-21 18:22 ` [PATCH v1 04/13] ARM: tegra: cardhu: " Dmitry Osipenko
2021-01-21 18:23 ` [PATCH v1 05/13] ARM: tegra: paz00: Enable full voltage scaling ranges for CPU and Core domains Dmitry Osipenko
2021-01-21 18:23 ` [PATCH v1 06/13] ARM: tegra: acer-a500: Enable core voltage scaling Dmitry Osipenko
2021-01-21 18:23 ` [PATCH v1 07/13] ARM: tegra: acer-a500: Reduce thermal throttling hysteresis to 0.2C Dmitry Osipenko
2021-01-21 18:23 ` [PATCH v1 08/13] ARM: tegra: acer-a500: Specify all CPU cores as cooling devices Dmitry Osipenko
2021-01-21 18:23 ` [PATCH v1 09/13] ARM: tegra: acer-a500: Rename avdd to vdda of touchscreen node Dmitry Osipenko
2021-01-22 20:14 ` Dmitry Osipenko
2021-01-21 18:23 ` [PATCH v1 10/13] ARM: tegra: nexus7: Specify all CPU cores as cooling devices Dmitry Osipenko
2021-01-21 18:23 ` [PATCH v1 11/13] ARM: tegra: ouya: " Dmitry Osipenko
2021-01-21 18:23 ` [PATCH v1 12/13] ARM: tegra: Specify CPU suspend OPP in device-tree Dmitry Osipenko
2021-01-21 18:23 ` [PATCH v1 13/13] ARM: tegra: Specify memory " Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210121182308.16080-4-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=daniel.lezcano@linaro.org \
--cc=jonathanh@nvidia.com \
--cc=kwizart@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mattmerhar@protonmail.com \
--cc=pgwipeout@gmail.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.