All of lore.kernel.org
 help / color / mirror / Atom feed
From: Borislav Petkov <bp@alien8.de>
To: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>,
	linux-wireless@vger.kernel.org,
	lkml <linux-kernel@vger.kernel.org>
Subject: net/wireless/reg.c:144 suspicious rcu_dereference_check() usage!
Date: Fri, 22 Jan 2021 11:11:24 +0100	[thread overview]
Message-ID: <20210122101124.GE4867@zn.tnic> (raw)

Hi,

this triggers is on 5.11-rc3 + tip/x86/urgent (shouldn't matter tho),
32-bit kernel:

[   10.019444] rtl8192ce: Chip Version ID: B_CHIP_88C
[   10.042810] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin

[   10.044258] =============================
[   10.044337] WARNING: suspicious RCU usage
[   10.044417] 5.11.0-rc3+ #1 Not tainted
[   10.044494] -----------------------------
[   10.044572] net/wireless/reg.c:144 suspicious rcu_dereference_check() usage!
[   10.044696] 
               other info that might help us debug this:

[   10.044833] 
               rcu_scheduler_active = 2, debug_locks = 1
[   10.044950] 1 lock held by udevd/301:
[   10.045025]  #0: c2ef8944 (&dev->mutex){....}-{3:3}, at: device_driver_attach+0x37/0xc0
[   10.045230] 
               stack backtrace:
[   10.045316] CPU: 0 PID: 301 Comm: udevd Not tainted 5.11.0-rc3+ #1
[   10.045428] Hardware name: LENOVO 30515QG/30515QG, BIOS 8RET30WW (1.12 ) 09/15/2011
[   10.045561] Call Trace:
[   10.045619]  dump_stack+0x6d/0x8b
[   10.045694]  lockdep_rcu_suspicious+0xbb/0xc4
[   10.045787]  get_wiphy_regdom+0x55/0x60 [cfg80211]
[   10.045995]  wiphy_apply_custom_regulatory+0xa4/0xe0 [cfg80211]
[   10.046191]  ? rtl_regd_init+0x180/0x180 [rtlwifi]
[   10.046299]  rtl_regd_init+0xd6/0x180 [rtlwifi]
[   10.046399]  rtl_init_core+0x1d7/0x910 [rtlwifi]
[   10.046500]  ? __const_udelay+0x35/0x40
[   10.046583]  rtl_pci_probe+0x776/0x1080 [rtl_pci]
[   10.046675]  ? _raw_spin_unlock_irqrestore+0x55/0x70
[   10.046770]  ? _raw_spin_unlock_irqrestore+0x38/0x70
[   10.046863]  ? __pm_runtime_resume+0x5a/0x90
[   10.046950]  ? trace_preempt_on+0x29/0xc0
[   10.047033]  ? __pm_runtime_resume+0x5a/0x90
[   10.047118]  ? preempt_count_sub+0xb9/0x110
[   10.047204]  ? _raw_spin_unlock_irqrestore+0x7/0x70
[   10.047297]  ? __pm_runtime_resume+0x5a/0x90
[   10.047383]  pci_device_probe+0xa4/0x110
[   10.047465]  ? sysfs_create_link+0x22/0x40
[   10.047551]  really_probe+0xd3/0x450
[   10.047625]  ? _raw_spin_unlock_irq+0x2d/0x50
[   10.047711]  driver_probe_device+0x5a/0x1b0
[   10.047793]  ? pci_match_device+0xbe/0xf0
[   10.047873]  ? preempt_count_sub+0xb9/0x110
[   10.047960]  device_driver_attach+0xb1/0xc0
[   10.048044]  __driver_attach+0x99/0x150
[   10.048122]  ? klist_next+0x93/0x140
[   10.048199]  ? device_driver_attach+0xc0/0xc0
[   10.048283]  bus_for_each_dev+0x5d/0xa0
[   10.048364]  driver_attach+0x1e/0x20
[   10.048437]  ? device_driver_attach+0xc0/0xc0
[   10.048521]  bus_add_driver+0x11f/0x1f0
[   10.048602]  driver_register+0x7f/0xd0
[   10.048681]  ? 0xf7f04000
[   10.048741]  __pci_register_driver+0x5c/0x70
[   10.048826]  rtl92ce_driver_init+0x1c/0x1000 [rtl8192ce]
[   10.048933]  do_one_initcall+0x5c/0x2f0
[   10.049012]  ? rcu_read_lock_sched_held+0x41/0x80
[   10.049105]  ? trace_kmalloc+0x53/0xf0
[   10.049184]  ? kmem_cache_alloc_trace+0xdf/0x1b0
[   10.049273]  ? do_init_module+0x24/0x260
[   10.049354]  do_init_module+0x53/0x260
[   10.049433]  load_module+0x2525/0x2b10
[   10.049517]  ? kernel_read+0x3e/0x50
[   10.049600]  __ia32_sys_finit_module+0xbd/0x120
[   10.049698]  __do_fast_syscall_32+0x54/0x80
[   10.049781]  do_fast_syscall_32+0x30/0x70
[   10.049861]  do_SYSENTER_32+0x15/0x20
[   10.049936]  entry_SYSENTER_32+0x9f/0xf2
[   10.050016] EIP: 0xb7f46549
[   10.050079] Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76
[   10.050376] EAX: ffffffda EBX: 0000000f ECX: b7ce5e63 EDX: 00000000
[   10.050486] ESI: 00bf8ed0 EDI: 00beb080 EBP: 00bf7f50 ESP: bfef492c
[   10.050596] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246
[   10.060833] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   10.066096] rtlwifi: rtlwifi: wireless switch is on

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette

             reply	other threads:[~2021-01-22 10:13 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-22 10:11 Borislav Petkov [this message]
2021-01-22 10:50 ` net/wireless/reg.c:144 suspicious rcu_dereference_check() usage! Borislav Petkov
2021-01-22 12:20   ` Kalle Valo
2021-01-22 12:57     ` Borislav Petkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210122101124.GE4867@zn.tnic \
    --to=bp@alien8.de \
    --cc=kvalo@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=pkshih@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.