[PATCH 2/7] USB: serial: cp210x: fix modem-control handling

[Johan Hovold <johan@kernel.org>]

The vendor request used to set the flow-control settings also sets the
state of the modem-control lines.

Add state variables to keep track of the modem-control lines to avoid
always asserting the lines whenever the flow-control settings are
updated.

This specifically also avoids asserting DTR/RTS when opening a port with
the line speed set to B0.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/cp210x.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 7e4a09b42c99..9378b4bba34b 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -269,6 +269,8 @@ struct cp210x_port_private {
 
 	struct mutex		mutex;
 	bool			crtscts;
+	bool			dtr;
+	bool			rts;
 };
 
 static struct usb_serial_driver cp210x_device = {
@@ -1162,7 +1164,10 @@ static void cp210x_set_flow_control(struct tty_struct *tty,
 	ctl_hs &= ~CP210X_SERIAL_DCD_HANDSHAKE;
 	ctl_hs &= ~CP210X_SERIAL_DSR_SENSITIVITY;
 	ctl_hs &= ~CP210X_SERIAL_DTR_MASK;
-	ctl_hs |= CP210X_SERIAL_DTR_SHIFT(CP210X_SERIAL_DTR_ACTIVE);
+	if (port_priv->dtr)
+		ctl_hs |= CP210X_SERIAL_DTR_SHIFT(CP210X_SERIAL_DTR_ACTIVE);
+	else
+		ctl_hs |= CP210X_SERIAL_DTR_SHIFT(CP210X_SERIAL_DTR_INACTIVE);
 
 	if (C_CRTSCTS(tty)) {
 		ctl_hs |= CP210X_SERIAL_CTS_HANDSHAKE;
@@ -1172,7 +1177,10 @@ static void cp210x_set_flow_control(struct tty_struct *tty,
 	} else {
 		ctl_hs &= ~CP210X_SERIAL_CTS_HANDSHAKE;
 		flow_repl &= ~CP210X_SERIAL_RTS_MASK;
-		flow_repl |= CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_ACTIVE);
+		if (port_priv->rts)
+			flow_repl |= CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_ACTIVE);
+		else
+			flow_repl |= CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_INACTIVE);
 		port_priv->crtscts = false;
 	}
 
@@ -1287,25 +1295,29 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
 	u16 control = 0;
 	int ret;
 
+	mutex_lock(&port_priv->mutex);
+
 	if (set & TIOCM_RTS) {
+		port_priv->rts = true;
 		control |= CONTROL_RTS;
 		control |= CONTROL_WRITE_RTS;
 	}
 	if (set & TIOCM_DTR) {
+		port_priv->dtr = true;
 		control |= CONTROL_DTR;
 		control |= CONTROL_WRITE_DTR;
 	}
 	if (clear & TIOCM_RTS) {
+		port_priv->rts = false;
 		control &= ~CONTROL_RTS;
 		control |= CONTROL_WRITE_RTS;
 	}
 	if (clear & TIOCM_DTR) {
+		port_priv->dtr = false;
 		control &= ~CONTROL_DTR;
 		control |= CONTROL_WRITE_DTR;
 	}
 
-	mutex_lock(&port_priv->mutex);
-
 	/*
 	 * SET_MHS cannot be used to control RTS when auto-RTS is enabled.
 	 * Note that RTS is still deasserted when disabling the UART on close.
-- 
2.26.2