All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Christopher M. Riedl" <cmr@codefail.de>
To: linuxppc-dev@lists.ozlabs.org
Cc: Daniel Axtens <dja@axtens.net>
Subject: [PATCH v4 08/10] powerpc/signal64: Rewrite handle_rt_signal64() to minimise uaccess switches
Date: Wed, 27 Jan 2021 22:04:22 -0600	[thread overview]
Message-ID: <20210128040424.12720-9-cmr@codefail.de> (raw)
In-Reply-To: <20210128040424.12720-1-cmr@codefail.de>

From: Daniel Axtens <dja@axtens.net>

Add uaccess blocks and use the 'unsafe' versions of functions doing user
access where possible to reduce the number of times uaccess has to be
opened/closed.

There is no 'unsafe' version of copy_siginfo_to_user, so move it
slightly to allow for a "longer" uaccess block.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Co-developed-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
---
 arch/powerpc/kernel/signal_64.c | 54 +++++++++++++++++++++------------
 1 file changed, 34 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index d668f8af18fe..a471e97589a8 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -849,44 +849,51 @@ int handle_rt_signal64(struct ksignal *ksig, sigset_t *set,
 	unsigned long msr = regs->msr;
 
 	frame = get_sigframe(ksig, tsk, sizeof(*frame), 0);
-	if (!access_ok(frame, sizeof(*frame)))
-		goto badframe;
 
-	err |= __put_user(&frame->info, &frame->pinfo);
-	err |= __put_user(&frame->uc, &frame->puc);
-	err |= copy_siginfo_to_user(&frame->info, &ksig->info);
-	if (err)
+	/* This only applies when calling unsafe_setup_sigcontext() and must be
+	 * called before opening the uaccess window.
+	 */
+	if (!MSR_TM_ACTIVE(msr))
+		prepare_setup_sigcontext(tsk, 1);
+
+	if (!user_write_access_begin(frame, sizeof(*frame)))
 		goto badframe;
 
+	unsafe_put_user(&frame->info, &frame->pinfo, badframe_block);
+	unsafe_put_user(&frame->uc, &frame->puc, badframe_block);
+
 	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __save_altstack(&frame->uc.uc_stack, regs->gpr[1]);
+	unsafe_put_user(0, &frame->uc.uc_flags, badframe_block);
+	unsafe_save_altstack(&frame->uc.uc_stack, regs->gpr[1], badframe_block);
 
 	if (MSR_TM_ACTIVE(msr)) {
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 		/* The ucontext_t passed to userland points to the second
 		 * ucontext_t (for transactional state) with its uc_link ptr.
 		 */
-		err |= __put_user(&frame->uc_transact, &frame->uc.uc_link);
+		unsafe_put_user(&frame->uc_transact, &frame->uc.uc_link, badframe_block);
+
+		user_write_access_end();
+
 		err |= setup_tm_sigcontexts(&frame->uc.uc_mcontext,
 					    &frame->uc_transact.uc_mcontext,
 					    tsk, ksig->sig, NULL,
 					    (unsigned long)ksig->ka.sa.sa_handler,
 					    msr);
+
+		if (!user_write_access_begin(frame, sizeof(struct rt_sigframe)))
+			goto badframe;
+
 #endif
 	} else {
-		err |= __put_user(0, &frame->uc.uc_link);
-		prepare_setup_sigcontext(tsk, 1);
-		if (!user_write_access_begin(frame, sizeof(struct rt_sigframe)))
-			return -EFAULT;
-		err |= __unsafe_setup_sigcontext(&frame->uc.uc_mcontext, tsk,
-						ksig->sig, NULL,
-						(unsigned long)ksig->ka.sa.sa_handler, 1);
-		user_write_access_end();
+		unsafe_put_user(0, &frame->uc.uc_link, badframe_block);
+		unsafe_setup_sigcontext(&frame->uc.uc_mcontext, tsk, ksig->sig,
+					NULL, (unsigned long)ksig->ka.sa.sa_handler,
+					1, badframe_block);
 	}
-	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-	if (err)
-		goto badframe;
+
+	unsafe_copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set), badframe_block);
+	user_write_access_end();
 
 	/* Make sure signal handler doesn't get spurious FP exceptions */
 	tsk->thread.fp_state.fpscr = 0;
@@ -901,6 +908,11 @@ int handle_rt_signal64(struct ksignal *ksig, sigset_t *set,
 		regs->nip = (unsigned long) &frame->tramp[0];
 	}
 
+
+	/* Save the siginfo outside of the unsafe block. */
+	if (copy_siginfo_to_user(&frame->info, &ksig->info))
+		goto badframe;
+
 	/* Allocate a dummy caller frame for the signal handler. */
 	newsp = ((unsigned long)frame) - __SIGNAL_FRAMESIZE;
 	err |= put_user(regs->gpr[1], (unsigned long __user *)newsp);
@@ -940,6 +952,8 @@ int handle_rt_signal64(struct ksignal *ksig, sigset_t *set,
 
 	return 0;
 
+badframe_block:
+	user_write_access_end();
 badframe:
 	signal_fault(current, regs, "handle_rt_signal64", frame);
 
-- 
2.26.1


  parent reply	other threads:[~2021-01-28  4:22 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-28  4:04 [PATCH v4 00/10] Improve signal performance on PPC64 with KUAP Christopher M. Riedl
2021-01-28  4:04 ` [PATCH v4 01/10] powerpc/uaccess: Add unsafe_copy_from_user Christopher M. Riedl
2021-01-28  4:04 ` [PATCH v4 02/10] powerpc/signal: Add unsafe_copy_{vsx, fpr}_from_user() Christopher M. Riedl
2021-01-28 10:38   ` David Laight
2021-01-28 12:05     ` Christophe Leroy
2021-02-01 15:55     ` Christopher M. Riedl
2021-02-01 16:15       ` David Laight
2021-02-01 16:55         ` Christopher M. Riedl
2021-02-01 17:37           ` David Laight
2021-02-01 17:43             ` Christopher M. Riedl
2021-02-01 16:54       ` Gabriel Paubert
2021-02-01 20:55         ` Christopher M. Riedl
2021-02-04  6:09           ` Michael Ellerman
2021-01-28  4:04 ` [PATCH v4 03/10] powerpc/signal64: Move non-inline functions out of setup_sigcontext() Christopher M. Riedl
2021-01-28  4:04 ` [PATCH v4 04/10] powerpc: Reference param in MSR_TM_ACTIVE() macro Christopher M. Riedl
2021-01-28  4:04 ` [PATCH v4 05/10] powerpc/signal64: Remove TM ifdefery in middle of if/else block Christopher M. Riedl
2021-01-28  4:04 ` [PATCH v4 06/10] powerpc/signal64: Replace setup_sigcontext() w/ unsafe_setup_sigcontext() Christopher M. Riedl
2021-01-28  4:04 ` [PATCH v4 07/10] powerpc/signal64: Replace restore_sigcontext() w/ unsafe_restore_sigcontext() Christopher M. Riedl
2021-01-28  4:04 ` Christopher M. Riedl [this message]
2021-01-28  4:04 ` [PATCH v4 09/10] powerpc/signal64: Rewrite rt_sigreturn() to minimise uaccess switches Christopher M. Riedl
2021-01-28  4:04 ` [PATCH v4 10/10] powerpc/signal64: Use __get_user() to copy sigset_t Christopher M. Riedl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210128040424.12720-9-cmr@codefail.de \
    --to=cmr@codefail.de \
    --cc=dja@axtens.net \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.