From: Simon Glass <sjg@chromium.org>
To: u-boot@lists.denx.de
Subject: [PATCH v3 39/41] spl: test: Add a test for spl_load_simple_fit()
Date: Wed, 3 Feb 2021 05:44:45 -0700 [thread overview]
Message-ID: <20210203124447.2458527-38-sjg@chromium.org> (raw)
In-Reply-To: <20210203124447.2458527-1-sjg@chromium.org>
As an example of an SPL test, add a new test for loading a FIT within
SPL. This runs on sandbox_spl. For this to work, the text base is adjusted
so that there is plenty of space available.
While we are here, document struct spl_load_info properly, since this is
currently ambiguous.
This test only verifies the logic path. It does not actually check that
the image is loaded correctly. It is not possible for sandbox's SPL to
actually run u-boot.img since it currently includes u-boot.bin rather than
u-boot. Further work could expand the test in that direction.
The need for this was noted at:
http://patchwork.ozlabs.org/project/uboot/patch/20201216000944.2832585-3-mr.nuke.me at gmail.com/
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
configs/sandbox_spl_defconfig | 2 +-
doc/arch/sandbox.rst | 4 +-
include/spl.h | 9 ++++
test/Makefile | 1 +
test/image/Makefile | 5 ++
test/image/spl_load.c | 91 +++++++++++++++++++++++++++++++++++
6 files changed, 110 insertions(+), 2 deletions(-)
create mode 100644 test/image/Makefile
create mode 100644 test/image/spl_load.c
diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig
index 61dae34a6a2..041c72ac261 100644
--- a/configs/sandbox_spl_defconfig
+++ b/configs/sandbox_spl_defconfig
@@ -1,4 +1,4 @@
-CONFIG_SYS_TEXT_BASE=0
+CONFIG_SYS_TEXT_BASE=0x200000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
diff --git a/doc/arch/sandbox.rst b/doc/arch/sandbox.rst
index 60ee1e0741a..1ccb5344ac6 100644
--- a/doc/arch/sandbox.rst
+++ b/doc/arch/sandbox.rst
@@ -537,5 +537,7 @@ Addr Config Usage
e000 CONFIG_BLOBLIST_ADDR Blob list
10000 CONFIG_MALLOC_F_ADDR Early memory allocation
f0000 CONFIG_PRE_CON_BUF_ADDR Pre-console buffer
- 100000 CONFIG_TRACE_EARLY_ADDR Early trace buffer (if enabled)
+ 100000 CONFIG_TRACE_EARLY_ADDR Early trace buffer (if enabled). Also used
+ as the SPL load buffer in spl_test_load().
+ 200000 CONFIG_SYS_TEXT_BASE Load buffer for U-Boot (sandbox_spl only)
======= ======================== ===============================
diff --git a/include/spl.h b/include/spl.h
index e172500b5f8..652d098994f 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -222,6 +222,15 @@ struct spl_load_info {
void *priv;
int bl_len;
const char *filename;
+ /**
+ * read() - Read from device
+ *
+ * @load: Information about the load state
+ * @sector: Sector number to read from (each @load->bl_len bytes)
+ * @count: Number of sectors to read
+ * @buf: Buffer to read into
+ * @return number of sectors read, 0 on error
+ */
ulong (*read)(struct spl_load_info *load, ulong sector, ulong count,
void *buf);
};
diff --git a/test/Makefile b/test/Makefile
index 5cd284e322e..a26e915e050 100644
--- a/test/Makefile
+++ b/test/Makefile
@@ -3,6 +3,7 @@
# (C) Copyright 2012 The Chromium Authors
obj-y += test-main.o
+obj-$(CONFIG_SANDBOX) += image/
ifneq ($(CONFIG_$(SPL_)BLOBLIST),)
obj-$(CONFIG_$(SPL_)CMDLINE) += bloblist.o
diff --git a/test/image/Makefile b/test/image/Makefile
new file mode 100644
index 00000000000..c4039df707f
--- /dev/null
+++ b/test/image/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2021 Google LLC
+
+obj-$(CONFIG_SPL_BUILD) += spl_load.o
diff --git a/test/image/spl_load.c b/test/image/spl_load.c
new file mode 100644
index 00000000000..851603ddd75
--- /dev/null
+++ b/test/image/spl_load.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <image.h>
+#include <mapmem.h>
+#include <os.h>
+#include <spl.h>
+#include <test/ut.h>
+
+/* Declare a new SPL test */
+#define SPL_TEST(_name, _flags) UNIT_TEST(_name, _flags, spl_test)
+
+/* Context used for this test */
+struct text_ctx {
+ int fd;
+};
+
+static ulong read_fit_image(struct spl_load_info *load, ulong sector,
+ ulong count, void *buf)
+{
+ struct text_ctx *text_ctx = load->priv;
+ off_t offset, ret;
+ ssize_t res;
+
+ offset = sector * load->bl_len;
+ ret = os_lseek(text_ctx->fd, offset, OS_SEEK_SET);
+ if (ret != offset) {
+ printf("Failed to seek to %zx, got %zx (errno=%d)\n", offset,
+ ret, errno);
+ return 0;
+ }
+
+ res = os_read(text_ctx->fd, buf, count * load->bl_len);
+ if (res == -1) {
+ printf("Failed to read %lx bytes, got %ld (errno=%d)\n",
+ count * load->bl_len, res, errno);
+ return 0;
+ }
+
+ return count;
+}
+
+int board_fit_config_name_match(const char *name)
+{
+ return 0;
+}
+
+struct image_header *spl_get_load_buffer(ssize_t offset, size_t size)
+{
+ return map_sysmem(0x100000, 0);
+}
+
+static int spl_test_load(struct unit_test_state *uts)
+{
+ struct spl_image_info image;
+ struct image_header *header;
+ struct text_ctx text_ctx;
+ struct spl_load_info load;
+ char fname[256];
+ int ret;
+ int fd;
+
+ memset(&load, '\0', sizeof(load));
+ load.bl_len = 512;
+ load.read = read_fit_image;
+
+ ret = os_find_u_boot(fname, sizeof(fname), true);
+ if (ret) {
+ printf("(%s not found, error %d)\n", fname, ret);
+ return ret;
+ }
+ load.filename = fname;
+
+ header = spl_get_load_buffer(-sizeof(*header), sizeof(*header));
+
+ fd = os_open(fname, OS_O_RDONLY);
+ ut_assert(fd >= 0);
+ ut_asserteq(512, os_read(fd, header, 512));
+ text_ctx.fd = fd;
+
+ load.priv = &text_ctx;
+
+ ut_assertok(spl_load_simple_fit(&image, &load, 0, header));
+
+ return 0;
+}
+SPL_TEST(spl_test_load, 0);
--
2.30.0.365.g02bc693789-goog
next prev parent reply other threads:[~2021-02-03 12:44 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-03 12:44 [PATCH v3 00/41] test: Refactor tests to have a single test runner Simon Glass
2021-02-03 12:44 ` [PATCH v3 01/41] doc: Tidy up testing section Simon Glass
2021-02-03 12:44 ` [PATCH v3 02/41] doc: Document make tcheck Simon Glass
2021-02-03 12:44 ` [PATCH v3 03/41] sandbox: Drop the 'starting...' message unless testing Simon Glass
2021-02-03 12:44 ` [PATCH v3 04/41] test: Re-enable test_ofplatdata Simon Glass
2021-02-03 12:44 ` [PATCH v3 05/41] doc: Explain how to run tests without pytest Simon Glass
2021-02-03 12:44 ` [PATCH v3 06/41] doc: Document how sandbox_spl_tests are run Simon Glass
2021-02-03 14:40 ` Pratyush Yadav
2021-02-03 12:44 ` [PATCH v3 07/41] test: Correct setexpr test prefix Simon Glass
2021-02-03 12:44 ` [PATCH v3 08/41] test: Mark all driver model tests with a flag Simon Glass
2021-02-03 12:44 ` [PATCH v3 09/41] test: Rename test-main.c to test-dm.c Simon Glass
2021-02-03 12:44 ` [PATCH v3 10/41] test: Add an overall test runner Simon Glass
2021-02-03 12:44 ` [PATCH v3 11/41] test: Create pre/post-run functions Simon Glass
2021-02-03 12:44 ` [PATCH v3 12/41] test: Call test_pre/post_run() from driver model tests Simon Glass
2021-02-03 12:44 ` [PATCH v3 13/41] test: Move dm_extended_scan() to test_pre_run() Simon Glass
2021-02-03 12:44 ` [PATCH v3 14/41] test: Move do_autoprobe() " Simon Glass
2021-02-03 12:44 ` [PATCH v3 15/41] test: Move dm_scan_plat() " Simon Glass
2021-02-03 12:44 ` [PATCH v3 16/41] test: Drop mallinfo() work-around Simon Glass
2021-02-03 12:44 ` [PATCH v3 17/41] test: Move console silencing to test_pre_run() Simon Glass
2021-02-03 12:44 ` [PATCH v3 18/41] test: Move delay skipping " Simon Glass
2021-02-03 12:44 ` [PATCH v3 19/41] test: Handle driver model reinit in test_pre_run() Simon Glass
2021-02-03 12:44 ` [PATCH v3 20/41] test: Drop struct dm_test_state Simon Glass
2021-02-03 12:44 ` [PATCH v3 21/41] test: Move dm_test_init() into test-main.c Simon Glass
2021-02-03 12:44 ` [PATCH v3 22/41] test: Move dm_test_destroy() " Simon Glass
2021-02-03 12:44 ` [PATCH v3 23/41] test: Move test running into a separate function Simon Glass
2021-02-03 12:44 ` [PATCH v3 24/41] test: Use ut_run_test() to run driver model tests Simon Glass
2021-02-03 12:44 ` [PATCH v3 25/41] test: Drop dm_do_test() Simon Glass
2021-02-03 12:44 ` [PATCH v3 26/41] test: Add ut_run_test_live_flat() to run tests twice Simon Glass
2021-02-03 12:44 ` [PATCH v3 27/41] test: Use a local variable for test state Simon Glass
2021-02-03 12:44 ` [PATCH v3 28/41] test: Run driver-model tests using ut_run_list() Simon Glass
2021-02-03 12:44 ` [PATCH v3 29/41] test: Use return values in dm_test_run() Simon Glass
2021-02-03 12:44 ` [PATCH v3 30/41] test: Move the devicetree check into ut_run_list() Simon Glass
2021-02-03 12:44 ` [PATCH v3 31/41] test: Move restoring of driver model state to ut_run_list() Simon Glass
2021-02-03 12:44 ` [PATCH v3 32/41] test: log: Rename log main test file to log_ut.c Simon Glass
2021-02-03 12:44 ` [PATCH v3 33/41] test: Add a macros for finding tests in linker_lists Simon Glass
2021-02-03 12:44 ` [PATCH v3 34/41] test: Rename all linker lists to have a ut_ prefix Simon Glass
2021-02-03 12:44 ` [PATCH v3 35/41] test: Allow SPL to run any available test Simon Glass
2021-02-03 12:44 ` [PATCH v3 36/41] sandbox: Update os_find_u_boot() to find the .img file Simon Glass
2021-02-03 12:44 ` [PATCH v3 37/41] spl: Convert spl_fit to work with sandbox Simon Glass
2021-02-03 12:44 ` [PATCH v3 38/41] doc: Move coccinelle into its own section Simon Glass
2021-02-03 12:44 ` Simon Glass [this message]
2021-02-03 12:44 ` [PATCH v3 40/41] test: sandbox: Move sandbox test docs into doc/develop Simon Glass
2021-02-03 12:44 ` [PATCH v3 41/41] doc: Explain briefly how to write new tests Simon Glass
2021-03-03 19:37 ` [PATCH v3 00/41] test: Refactor tests to have a single test runner Tom Rini
2021-03-03 20:18 ` Tom Rini
2021-03-03 20:37 ` Tom Rini
2021-03-04 3:06 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210203124447.2458527-38-sjg@chromium.org \
--to=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.