All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Hajnoczi <stefanha@redhat.com>
To: Peter Maydell <peter.maydell@linaro.org>, qemu-devel@nongnu.org
Cc: "Fam Zheng" <fam@euphon.net>,
	"John G Johnson" <john.g.johnson@oracle.com>,
	"Thomas Huth" <thuth@redhat.com>,
	"Jagannathan Raman" <jag.raman@oracle.com>,
	"Stefan Hajnoczi" <stefanha@redhat.com>,
	qemu-block@nongnu.org, "Michael S. Tsirkin" <mst@redhat.com>,
	"Denis V. Lunev" <den@openvz.org>,
	"Philippe Mathieu-Daudé" <philmd@redhat.com>,
	"Daniel P. Berrangé" <berrange@redhat.com>,
	"Elena Ufimtseva" <elena.ufimtseva@oracle.com>,
	"Wainer dos Santos Moschetta" <wainersm@redhat.com>,
	"Igor Mammedov" <imammedo@redhat.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Alex Bennée" <alex.bennee@linaro.org>,
	"Eduardo Habkost" <ehabkost@redhat.com>
Subject: [PULL v3 26/27] multi-process: perform device reset in the remote process
Date: Fri,  5 Feb 2021 16:44:58 +0000	[thread overview]
Message-ID: <20210205164459.432714-27-stefanha@redhat.com> (raw)
In-Reply-To: <20210205164459.432714-1-stefanha@redhat.com>

From: Elena Ufimtseva <elena.ufimtseva@oracle.com>

Perform device reset in the remote process when QEMU performs
device reset. This is required to reset the internal state
(like registers, etc...) of emulated devices

Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 7cb220a51f565dc0817bd76e2f540e89c2d2b850.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 include/hw/remote/mpqemu-link.h |  1 +
 hw/remote/message.c             | 22 ++++++++++++++++++++++
 hw/remote/proxy.c               | 19 +++++++++++++++++++
 3 files changed, 42 insertions(+)

diff --git a/include/hw/remote/mpqemu-link.h b/include/hw/remote/mpqemu-link.h
index 71d206f00e..4ec0915885 100644
--- a/include/hw/remote/mpqemu-link.h
+++ b/include/hw/remote/mpqemu-link.h
@@ -40,6 +40,7 @@ typedef enum {
     MPQEMU_CMD_BAR_WRITE,
     MPQEMU_CMD_BAR_READ,
     MPQEMU_CMD_SET_IRQFD,
+    MPQEMU_CMD_DEVICE_RESET,
     MPQEMU_CMD_MAX,
 } MPQemuCmd;
 
diff --git a/hw/remote/message.c b/hw/remote/message.c
index adab040ca1..11d729845c 100644
--- a/hw/remote/message.c
+++ b/hw/remote/message.c
@@ -19,6 +19,7 @@
 #include "exec/memattrs.h"
 #include "hw/remote/memory.h"
 #include "hw/remote/iohub.h"
+#include "sysemu/reset.h"
 
 static void process_config_write(QIOChannel *ioc, PCIDevice *dev,
                                  MPQemuMsg *msg, Error **errp);
@@ -26,6 +27,8 @@ static void process_config_read(QIOChannel *ioc, PCIDevice *dev,
                                 MPQemuMsg *msg, Error **errp);
 static void process_bar_write(QIOChannel *ioc, MPQemuMsg *msg, Error **errp);
 static void process_bar_read(QIOChannel *ioc, MPQemuMsg *msg, Error **errp);
+static void process_device_reset_msg(QIOChannel *ioc, PCIDevice *dev,
+                                     Error **errp);
 
 void coroutine_fn mpqemu_remote_msg_loop_co(void *data)
 {
@@ -69,6 +72,9 @@ void coroutine_fn mpqemu_remote_msg_loop_co(void *data)
         case MPQEMU_CMD_SET_IRQFD:
             process_set_irqfd_msg(pci_dev, &msg);
             break;
+        case MPQEMU_CMD_DEVICE_RESET:
+            process_device_reset_msg(com->ioc, pci_dev, &local_err);
+            break;
         default:
             error_setg(&local_err,
                        "Unknown command (%d) received for device %s"
@@ -206,3 +212,19 @@ fail:
                       getpid());
     }
 }
+
+static void process_device_reset_msg(QIOChannel *ioc, PCIDevice *dev,
+                                     Error **errp)
+{
+    DeviceClass *dc = DEVICE_GET_CLASS(dev);
+    DeviceState *s = DEVICE(dev);
+    MPQemuMsg ret = { 0 };
+
+    if (dc->reset) {
+        dc->reset(s);
+    }
+
+    ret.cmd = MPQEMU_CMD_RET;
+
+    mpqemu_msg_send(&ret, ioc, errp);
+}
diff --git a/hw/remote/proxy.c b/hw/remote/proxy.c
index a082709881..4fa4be079d 100644
--- a/hw/remote/proxy.c
+++ b/hw/remote/proxy.c
@@ -26,6 +26,7 @@
 #include "util/event_notifier-posix.c"
 
 static void probe_pci_info(PCIDevice *dev, Error **errp);
+static void proxy_device_reset(DeviceState *dev);
 
 static void proxy_intx_update(PCIDevice *pci_dev)
 {
@@ -202,6 +203,8 @@ static void pci_proxy_dev_class_init(ObjectClass *klass, void *data)
     k->config_read = pci_proxy_read_config;
     k->config_write = pci_proxy_write_config;
 
+    dc->reset = proxy_device_reset;
+
     device_class_set_props(dc, proxy_properties);
 }
 
@@ -358,3 +361,19 @@ static void probe_pci_info(PCIDevice *dev, Error **errp)
         }
     }
 }
+
+static void proxy_device_reset(DeviceState *dev)
+{
+    PCIProxyDev *pdev = PCI_PROXY_DEV(dev);
+    MPQemuMsg msg = { 0 };
+    Error *local_err = NULL;
+
+    msg.cmd = MPQEMU_CMD_DEVICE_RESET;
+    msg.size = 0;
+
+    mpqemu_msg_send_and_await_reply(&msg, pdev, &local_err);
+    if (local_err) {
+        error_report_err(local_err);
+    }
+
+}
-- 
2.29.2


  parent reply	other threads:[~2021-02-05 17:23 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-05 16:44 [PULL v3 00/27] Block patches Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 01/27] .github: point Repo Lockdown bot to GitLab repo Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 02/27] gitmodules: use GitLab repos instead of qemu.org Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 03/27] gitlab-ci: remove redundant GitLab repo URL command Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 04/27] docs: update README to use GitLab repo URLs Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 05/27] pc-bios: update mirror URLs to GitLab Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 06/27] get_maintainer: update repo URL " Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 07/27] multi-process: add the concept description to docs/devel/qemu-multiprocess Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 08/27] multi-process: add configure and usage information Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 09/27] memory: alloc RAM from file at offset Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 10/27] multi-process: Add config option for multi-process QEMU Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 11/27] multi-process: setup PCI host bridge for remote device Stefan Hajnoczi
2021-02-06 17:57   ` Philippe Mathieu-Daudé
2021-02-08  5:43     ` Thomas Huth
2021-02-05 16:44 ` [PULL v3 12/27] multi-process: setup a machine object for remote device process Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 13/27] io: add qio_channel_writev_full_all helper Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 14/27] io: add qio_channel_readv_full_all_eof & qio_channel_readv_full_all helpers Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 15/27] multi-process: define MPQemuMsg format and transmission functions Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 16/27] multi-process: Initialize message handler in remote device Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 17/27] multi-process: Associate fd of a PCIDevice with its object Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 18/27] multi-process: setup memory manager for remote device Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 19/27] multi-process: introduce proxy object Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 20/27] multi-process: add proxy communication functions Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 21/27] multi-process: Forward PCI config space acceses to the remote process Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 22/27] multi-process: PCI BAR read/write handling for proxy & remote endpoints Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 23/27] multi-process: Synchronize remote memory Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 24/27] multi-process: create IOHUB object to handle irq Stefan Hajnoczi
2021-02-05 16:44 ` [PULL v3 25/27] multi-process: Retrieve PCI info from remote process Stefan Hajnoczi
2021-02-05 16:44 ` Stefan Hajnoczi [this message]
2021-02-05 16:44 ` [PULL v3 27/27] docs: fix Parallels Image "dirty bitmap" section Stefan Hajnoczi
2021-02-05 22:53 ` [PULL v3 00/27] Block patches Peter Maydell
2021-02-06 17:03   ` Peter Maydell
2021-02-08  9:27     ` Stefan Hajnoczi
2021-02-08 10:02       ` Philippe Mathieu-Daudé
2021-02-08 19:32         ` Jag Raman
2021-02-08 21:29           ` Alex Bennée
2021-02-08 20:21         ` Stefan Hajnoczi
2021-02-09  6:03           ` Thomas Huth
2021-02-09 16:22             ` Jag Raman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210205164459.432714-27-stefanha@redhat.com \
    --to=stefanha@redhat.com \
    --cc=alex.bennee@linaro.org \
    --cc=berrange@redhat.com \
    --cc=den@openvz.org \
    --cc=ehabkost@redhat.com \
    --cc=elena.ufimtseva@oracle.com \
    --cc=fam@euphon.net \
    --cc=imammedo@redhat.com \
    --cc=jag.raman@oracle.com \
    --cc=john.g.johnson@oracle.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=thuth@redhat.com \
    --cc=wainersm@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.