From: Mark Brown <broonie@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org, Mark Brown <broonie@kernel.org>
Subject: [GIT PULL] regulator updates for v5.12
Date: Mon, 15 Feb 2021 20:44:00 +0000 [thread overview]
Message-ID: <20210215204511.0B9DE64DF4@mail.kernel.org> (raw)
The following changes since commit 92bf22614b21a2706f4993b278017e437f7785b3:
Linux 5.11-rc7 (2021-02-07 13:57:38 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git tags/regulator-v5.12
for you to fetch changes up to f03e2a72e5e8772ba0c2a0fc4539e4ffd03d411b:
Merge remote-tracking branch 'regulator/for-5.12' into regulator-next (2021-02-12 14:00:07 +0000)
----------------------------------------------------------------
regulator: Updates for v5.12
Quite an active release for driver specific updates but very little
going on at the subsystem level this time for the regulator API.
- Overhaul of the Qualcomm LABIBB driver.
- Allow use of regulator_sync_voltage() on coupled regulators.
- Support for Action ATC260x, Mediatek DVSRC and MT6315, Qualcomm
PCM8180/c and PM8009-1 and Richtek RT4831
- Removal of the AB3100 driver.
----------------------------------------------------------------
Adrien Grassein (6):
regulator: pf8x00: add a doc for the module
regulator: dt-bindings: pf8x00: fix nxp,phase-shift doc
regulator: dt-bindings: pf8x00: mark nxp,ilim-ma property as deprecated
regulator: pf8x00: mark nxp,ilim-ma property as deprecated
regulator: pf8x00: use linear range for buck 1-6
regulator: pf8x00: fix nxp,phase-shift
AngeloGioacchino Del Regno (7):
regulator: qcom-labibb: Implement voltage selector ops
regulator: qcom-labibb: Switch voltage ops from linear_range to linear
regulator: qcom-labibb: Implement current limiting
regulator: qcom-labibb: Implement pull-down, softstart, active discharge
regulator: qcom-labibb: Implement short-circuit and over-current IRQs
regulator: qcom-labibb: Document soft start properties
regulator: qcom-labibb: Document SCP/OCP interrupts
Arnd Bergmann (1):
regulator: remove ab3100 driver
Axel Lin (1):
regulator: pf8x00: Fix typo for PF8200 chip name
Bjorn Andersson (2):
regulator: qcom-rpmh: Add pmc8180 and pmc8180c
regulator: qcom-rpmh: Add pmc8180 and pmc8180c
ChiYuan Huang (2):
regulator: rt4831: Adds DT binding document for Richtek RT4831 DSV regulator
regulator: rt4831: Adds support for Richtek RT4831 DSV regulator
Christoph Fritz (2):
regulator: pf8x00: Add suspend support
regulator: pf8x00: set ramp_delay for bucks
Claudiu Beznea (3):
regulator: mcp16502: lpm pin can be optional on some platforms
MAINTAINERS: add myself as maintainer for mcp16502
regulator: mcp16502: document lpm as optional
Cristian Ciocaltea (1):
regulator: Add regulator driver for ATC260x PMICs
Daniel Scally (1):
regulator: core.c: Replace references to non-existent function
Dmitry Baryshkov (2):
regulator: qcom-rpmh-regulator: add pm8009-1 chip revision
arm64: dts: qcom: qrb5165-rb5: fix pm8009 regulators
Dmitry Osipenko (1):
regulator: Make regulator_sync_voltage() usable by coupled regulators
Frieder Schrempf (3):
regulator: pca9450: Add SD_VSEL GPIO for LDO5
regulator: pca9450: Enable system reset on WDOG_B assertion
regulator: pca9450: Add sd-vsel GPIO
Hans de Goede (1):
regulator: core: Avoid debugfs: Directory ... already present! error
Hsin-Hsiung Wang (2):
regulator: document binding for MT6315 regulator
regulator: mt6315: Add support for MT6315 regulator
Jonathan Marek (1):
regulator: qcom-rpmh: fix pm8009 ldo7
Krzysztof Kozlowski (1):
regulator: s5m8767: Drop regulators OF node reference
Linus Walleij (2):
regulator: ab8500: Remove unused platform data
regulator: ab8500: Decomission platform data header
Mark Brown (10):
Merge existing fixes from regulator/for-5.11
Merge series "regulator: fix pm8009 bindings on sm8250" from Dmitry Baryshkov <dmitry.baryshkov@linaro.org>:
Merge branch 'regulator-5.11' into regulator-5.12
Merge series "Add driver for dvfsrc, support for active state of scpsys" from Henry Chen <henryc.chen@mediatek.com>:
Merge series "regulator: mcp16502: make lpm pin optional" from Claudiu Beznea <claudiu.beznea@microchip.com>:
Merge v5.11-rc3
Merge series "Really implement Qualcomm LAB/IBB regulators" from AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>:
Merge series "Really implement Qualcomm LAB/IBB regulators" from AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>:
Merge remote-tracking branch 'regulator/for-5.11' into regulator-linus
Merge remote-tracking branch 'regulator/for-5.12' into regulator-next
Matti Vaittinen (4):
regulator: ROHM bd7xxxx: Do not depend on parent driver data
regulator: bd718x7: Stop using parent data
regulator: qcom-labibb: Use disable_irq_nosync from isr
regulator: bd718x7, bd71828, Fix dvs voltage levels
Pan Bian (2):
regulator: axp20x: Fix reference cout leak
regulator: s5m8767: Fix reference count leak
Randy Dunlap (2):
lib/linear_ranges: fix repeated words & one typo
regulator: qcom-rpmh: fix build after QCOM_COMMAND_DB is tristate
Timon Baetz (1):
regulator: dt-bindings: Document charger-supply for max8997
henryc.chen (1):
regulator: Regulator driver for the Mediatek DVFSRC
.../bindings/regulator/max8997-regulator.txt | 1 +
.../bindings/regulator/mcp16502-regulator.txt | 3 +-
.../bindings/regulator/mt6315-regulator.yaml | 69 ++
.../bindings/regulator/nxp,pca9450-regulator.yaml | 5 +
.../bindings/regulator/nxp,pf8x00-regulator.yaml | 17 +-
.../bindings/regulator/qcom,rpmh-regulator.txt | 2 +
.../bindings/regulator/qcom-labibb-regulator.yaml | 30 +-
.../regulator/richtek,rt4831-regulator.yaml | 35 +
MAINTAINERS | 4 +-
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 9 +-
drivers/mfd/ab8500-core.c | 1 -
drivers/regulator/Kconfig | 51 +-
drivers/regulator/Makefile | 5 +-
drivers/regulator/ab3100.c | 724 --------------------
drivers/regulator/ab8500-ext.c | 422 +-----------
drivers/regulator/ab8500.c | 116 +++-
drivers/regulator/atc260x-regulator.c | 539 +++++++++++++++
drivers/regulator/axp20x-regulator.c | 7 +-
drivers/regulator/bd70528-regulator.c | 11 +-
drivers/regulator/bd71828-regulator.c | 13 +-
drivers/regulator/bd718x7-regulator.c | 20 +-
drivers/regulator/core.c | 18 +-
drivers/regulator/mcp16502.c | 2 +-
drivers/regulator/mt6315-regulator.c | 299 +++++++++
drivers/regulator/mtk-dvfsrc-regulator.c | 215 ++++++
drivers/regulator/pca9450-regulator.c | 22 +
drivers/regulator/pf8x00-regulator.c | 278 +++++---
drivers/regulator/qcom-labibb-regulator.c | 728 ++++++++++++++++++++-
drivers/regulator/qcom-rpmh-regulator.c | 34 +
drivers/regulator/rohm-regulator.c | 9 +-
drivers/regulator/rt4831-regulator.c | 198 ++++++
drivers/regulator/s5m8767.c | 15 +-
include/linux/mfd/abx500/ab8500.h | 3 -
include/linux/mfd/rohm-generic.h | 14 +-
include/linux/regulator/ab8500.h | 166 -----
include/linux/regulator/mt6315-regulator.h | 44 ++
include/linux/regulator/pca9450.h | 7 +
lib/linear_ranges.c | 8 +-
38 files changed, 2661 insertions(+), 1483 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml
delete mode 100644 drivers/regulator/ab3100.c
create mode 100644 drivers/regulator/atc260x-regulator.c
create mode 100644 drivers/regulator/mt6315-regulator.c
create mode 100644 drivers/regulator/mtk-dvfsrc-regulator.c
create mode 100644 drivers/regulator/rt4831-regulator.c
delete mode 100644 include/linux/regulator/ab8500.h
create mode 100644 include/linux/regulator/mt6315-regulator.h
next reply other threads:[~2021-02-15 20:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-15 20:44 Mark Brown [this message]
2021-02-22 18:12 ` [GIT PULL] regulator updates for v5.12 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210215204511.0B9DE64DF4@mail.kernel.org \
--to=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.