All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Baruch Siach <baruch@tkos.co.il>
Cc: Richard Weinberger <richard@nod.at>,
	linux-mtd@lists.infradead.org,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>
Subject: Re: [PATCH] mtd: parsers: extend Qcom SMEM parser to SPI flash
Date: Tue, 23 Feb 2021 17:37:17 +0530	[thread overview]
Message-ID: <20210223120717.GA9724@work> (raw)
In-Reply-To: <7f558e888a41c5b1fd4ca0427b3976531c51a876.1614080824.git.baruch@tkos.co.il>

On Tue, Feb 23, 2021 at 01:47:04PM +0200, Baruch Siach wrote:
> The Qcom MIBIB partition might be stored on SPI flash devices, and the
> parser works in this case just as well:
> 

Nice!

> [    1.404229] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
> [    1.408078] spi-nor spi0.0: found mx25u6435f, expected n25q128a11
> [    1.415016] spi-nor spi0.0: mx25u6435f (8192 Kbytes)
> [    1.420756] 12 qcomsmem partitions found on MTD device spi0.0
> [    1.425739] Creating 12 MTD partitions on "spi0.0":
> [    1.431381] 0x000000000000-0x00000000c000 : "0:sbl1"
> [    1.437058] 0x00000000c000-0x00000000d000 : "0:mibib"
> [    1.442143] 0x00000000d000-0x000000027000 : "0:qsee"
> [    1.447057] 0x000000027000-0x000000028000 : "0:devcfg"
> [    1.452088] 0x000000028000-0x00000002a000 : "0:rpm"
> [    1.457065] 0x00000002a000-0x00000002b000 : "0:cdt"
> [    1.461832] 0x00000002b000-0x00000002c000 : "0:appsblenv"
> [    1.466736] 0x00000002c000-0x000000036000 : "0:appsbl"
> [    1.472248] 0x000000036000-0x00000003a000 : "0:art"
> [    1.477297] 0x00000003a000-0x00000003e000 : "config"
> [    1.482047] 0x00000003e000-0x00000004e000 : "data"
> [    1.487257] 0x00000004e000-0x000000200000 : "0:hlos"
> 
> Remove dependency on MTD_NAND_QCOM. Update the Kconfig prompt and help
> text accordingly.
> 
> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
> ---
>  drivers/mtd/parsers/Kconfig | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
> index d90c30229052..96d5716db544 100644
> --- a/drivers/mtd/parsers/Kconfig
> +++ b/drivers/mtd/parsers/Kconfig
> @@ -162,9 +162,8 @@ config MTD_REDBOOT_PARTS_READONLY
>  endif # MTD_REDBOOT_PARTS
>  
>  config MTD_QCOMSMEM_PARTS
> -	tristate "Qualcomm SMEM NAND flash partition parser"
> -	depends on MTD_NAND_QCOM || COMPILE_TEST

Can we keep COMPILE_TEST below? With that,

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> +	tristate "Qualcomm SMEM flash partition parser"
>  	depends on QCOM_SMEM
>  	help
>  	  This provides support for parsing partitions from Shared Memory (SMEM)
> -	  for NAND flash on Qualcomm platforms.
> +	  for NAND and SPI flash on Qualcomm platforms.
> -- 
> 2.30.0
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2021-02-23 12:08 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-23 11:47 [PATCH] mtd: parsers: extend Qcom SMEM parser to SPI flash Baruch Siach
2021-02-23 12:07 ` Manivannan Sadhasivam [this message]
2021-02-23 12:16   ` Baruch Siach
2021-02-23 13:06     ` Manivannan Sadhasivam
2021-03-02 17:13 ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210223120717.GA9724@work \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=baruch@tkos.co.il \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.