From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Nicolas Chauvet <kwizart@gmail.com>,
Matt Merhar <mattmerhar@protonmail.com>,
Peter Geis <pgwipeout@gmail.com>
Cc: linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 00/14] NVIDIA Tegra ARM32 device-tree improvements
Date: Tue, 2 Mar 2021 15:09:49 +0300 [thread overview]
Message-ID: <20210302121003.15058-1-digetx@gmail.com> (raw)
Hi,
This series is partially factored out from [1] since the DT patches
could be applied separately. In addition I added couple more new
patches and implemented suggestion given by Daniel Lezcano to [1],
see "Specify all CPU cores as cooling devices" patches.
[1] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=221130
Please note that this patchset enables voltage scaling for a few boards,
but currently voltage scaling is limited in kernel by the regulator coupler
drivers, so it's safe to change the device-trees. Voltage scaling will
be fully unlocked once [1] will be merged.
Changelog:
v3: - Added new "Specify tps65911 as wakeup source" patch, which previously
was a part of series that added wakeup-source support to TPS65911 RTC
driver [1]. The RTC series was partially applied, excluding the DT
patch.
[1] https://lore.kernel.org/linux-rtc/20210120211603.18555-1-digetx@gmail.com/
v2: - The "acer-a500: Rename avdd to vdda of touchscreen node" patch
now shouldn't have merge conflicts with the upstream kernel since
v1 was based on a patch that adds a new atmel,wakeup-method property,
which is not supported by upstream yet.
- Fixed unwrapped commit description in the "cardhu: Support CPU
frequency and voltage" patch.
Dmitry Osipenko (14):
ARM: tegra: ventana: Support CPU and Core voltage scaling
ARM: tegra: ventana: Support CPU thermal throttling
ARM: tegra: cardhu: Support CPU frequency and voltage scaling on all
board variants
ARM: tegra: cardhu: Support CPU thermal throttling
ARM: tegra: paz00: Enable full voltage scaling ranges for CPU and Core
domains
ARM: tegra: acer-a500: Enable core voltage scaling
ARM: tegra: acer-a500: Reduce thermal throttling hysteresis to 0.2C
ARM: tegra: acer-a500: Specify all CPU cores as cooling devices
ARM: tegra: acer-a500: Rename avdd to vdda of touchscreen node
ARM: tegra: nexus7: Specify all CPU cores as cooling devices
ARM: tegra: ouya: Specify all CPU cores as cooling devices
ARM: tegra: Specify CPU suspend OPP in device-tree
ARM: tegra: Specify memory suspend OPP in device-tree
ARM: tegra: Specify tps65911 as wakeup source
.../boot/dts/tegra124-peripherals-opp.dtsi | 5 ++
.../boot/dts/tegra20-acer-a500-picasso.dts | 14 ++--
arch/arm/boot/dts/tegra20-cpu-opp.dtsi | 2 +
arch/arm/boot/dts/tegra20-paz00.dts | 14 ++--
.../arm/boot/dts/tegra20-peripherals-opp.dtsi | 1 +
arch/arm/boot/dts/tegra20-ventana.dts | 78 ++++++++++++++---
arch/arm/boot/dts/tegra30-apalis.dtsi | 1 +
.../tegra30-asus-nexus7-grouper-common.dtsi | 14 +++-
.../tegra30-asus-nexus7-grouper-ti-pmic.dtsi | 1 +
arch/arm/boot/dts/tegra30-beaver.dts | 1 +
arch/arm/boot/dts/tegra30-cardhu-a04.dts | 48 -----------
arch/arm/boot/dts/tegra30-cardhu.dtsi | 84 ++++++++++++++++++-
arch/arm/boot/dts/tegra30-colibri.dtsi | 1 +
arch/arm/boot/dts/tegra30-cpu-opp.dtsi | 3 +
arch/arm/boot/dts/tegra30-ouya.dts | 16 +++-
.../arm/boot/dts/tegra30-peripherals-opp.dtsi | 3 +
16 files changed, 202 insertions(+), 84 deletions(-)
--
2.29.2
next reply other threads:[~2021-03-03 3:36 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-02 12:09 Dmitry Osipenko [this message]
2021-03-02 12:09 ` [PATCH v3 01/14] ARM: tegra: ventana: Support CPU and Core voltage scaling Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 02/14] ARM: tegra: ventana: Support CPU thermal throttling Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 03/14] ARM: tegra: cardhu: Support CPU frequency and voltage scaling on all board variants Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 04/14] ARM: tegra: cardhu: Support CPU thermal throttling Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 05/14] ARM: tegra: paz00: Enable full voltage scaling ranges for CPU and Core domains Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 06/14] ARM: tegra: acer-a500: Enable core voltage scaling Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 07/14] ARM: tegra: acer-a500: Reduce thermal throttling hysteresis to 0.2C Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 08/14] ARM: tegra: acer-a500: Specify all CPU cores as cooling devices Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 09/14] ARM: tegra: acer-a500: Rename avdd to vdda of touchscreen node Dmitry Osipenko
2021-03-24 15:11 ` Thierry Reding
2021-03-24 15:24 ` Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 10/14] ARM: tegra: nexus7: Specify all CPU cores as cooling devices Dmitry Osipenko
2021-03-02 12:10 ` [PATCH v3 11/14] ARM: tegra: ouya: " Dmitry Osipenko
2021-03-02 12:10 ` [PATCH v3 12/14] ARM: tegra: Specify CPU suspend OPP in device-tree Dmitry Osipenko
2021-03-02 12:10 ` [PATCH v3 13/14] ARM: tegra: Specify memory " Dmitry Osipenko
2021-03-02 12:10 ` [PATCH v3 14/14] ARM: tegra: Specify tps65911 as wakeup source Dmitry Osipenko
2021-03-24 15:12 ` [PATCH v3 00/14] NVIDIA Tegra ARM32 device-tree improvements Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210302121003.15058-1-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=daniel.lezcano@linaro.org \
--cc=jonathanh@nvidia.com \
--cc=kwizart@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mattmerhar@protonmail.com \
--cc=pgwipeout@gmail.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.