All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Loic Poulain <loic.poulain@linaro.org>
Cc: hemantk@codeaurora.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH 2/6] mhi: pci_generic: Introduce quectel EM1XXGR-L support
Date: Thu, 4 Mar 2021 12:02:08 +0530	[thread overview]
Message-ID: <20210304063208.GB3363@thinkpad> (raw)
In-Reply-To: <1614615911-18794-2-git-send-email-loic.poulain@linaro.org>

On Mon, Mar 01, 2021 at 05:25:07PM +0100, Loic Poulain wrote:
> Add support for EM1XXGR-L modems, this modem series is based on SDX24
> qcom chip. The modem is mainly based on MBIM protocol for both the
> data and control path. The drivers for these channels (mhi-net-mbim and
> mhi_uci) are not yet part of the kernel but will be integrated by
> different series.
> 
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
>  drivers/bus/mhi/pci_generic.c | 73 +++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 73 insertions(+)
> 
> diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c
> index c58bf96..00a0410 100644
> --- a/drivers/bus/mhi/pci_generic.c
> +++ b/drivers/bus/mhi/pci_generic.c
> @@ -114,6 +114,36 @@ struct mhi_pci_dev_info {
>  		.doorbell_mode_switch = true,		\
>  	}
>  
> +#define MHI_CHANNEL_CONFIG_UL_SBL(ch_num, ch_name, el_count, ev_ring) \
> +	{						\
> +		.num = ch_num,				\
> +		.name = ch_name,			\
> +		.num_elements = el_count,		\
> +		.event_ring = ev_ring,			\
> +		.dir = DMA_TO_DEVICE,			\
> +		.ee_mask = BIT(MHI_EE_SBL),		\
> +		.pollcfg = 0,				\
> +		.doorbell = MHI_DB_BRST_DISABLE,	\
> +		.lpm_notify = false,			\
> +		.offload_channel = false,		\
> +		.doorbell_mode_switch = false,		\
> +	}						\
> +
> +#define MHI_CHANNEL_CONFIG_DL_SBL(ch_num, ch_name, el_count, ev_ring) \
> +	{						\
> +		.num = ch_num,				\
> +		.name = ch_name,			\
> +		.num_elements = el_count,		\
> +		.event_ring = ev_ring,			\
> +		.dir = DMA_FROM_DEVICE,			\
> +		.ee_mask = BIT(MHI_EE_SBL),		\
> +		.pollcfg = 0,				\
> +		.doorbell = MHI_DB_BRST_DISABLE,	\
> +		.lpm_notify = false,			\
> +		.offload_channel = false,		\
> +		.doorbell_mode_switch = false,		\
> +	}
> +
>  #define MHI_EVENT_CONFIG_DATA(ev_ring, el_count) \
>  	{					\
>  		.num_elements = el_count,	\
> @@ -182,9 +212,52 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = {
>  	.dma_data_width = 32
>  };
>  
> +static const struct mhi_channel_config mhi_quectel_em1xx_channels[] = {
> +	MHI_CHANNEL_CONFIG_UL(0, "NMEA", 32, 0),
> +	MHI_CHANNEL_CONFIG_DL(1, "NMEA", 32, 0),
> +	MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 32, 0),
> +	MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 32, 0),
> +	MHI_CHANNEL_CONFIG_UL(4, "DIAG", 32, 1),
> +	MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 1),
> +	MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0),
> +	MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0),
> +	MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
> +	MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
> +	MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2),
> +	MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3),
> +};
> +
> +static struct mhi_event_config mhi_quectel_em1xx_events[] = {
> +	MHI_EVENT_CONFIG_CTRL(0, 128),
> +	MHI_EVENT_CONFIG_DATA(1, 128),
> +	MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
> +	MHI_EVENT_CONFIG_HW_DATA(3, 1024, 101)
> +};
> +
> +static struct mhi_controller_config modem_quectel_em1xx_config = {
> +	.max_channels = 128,
> +	.timeout_ms = 8000,
> +	.num_channels = ARRAY_SIZE(mhi_quectel_em1xx_channels),
> +	.ch_cfg = mhi_quectel_em1xx_channels,
> +	.num_events = ARRAY_SIZE(mhi_quectel_em1xx_events),
> +	.event_cfg = mhi_quectel_em1xx_events,
> +};
> +
> +static const struct mhi_pci_dev_info mhi_quectel_em1xx_info = {
> +	.name = "quectel-em1xx",
> +	.edl = "qcom/prog_firehose_sdx24.mbn",
> +	.config = &modem_quectel_em1xx_config,
> +	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> +	.dma_data_width = 32
> +};
> +
>  static const struct pci_device_id mhi_pci_id_table[] = {
>  	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306),
>  		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info },
> +	{ PCI_DEVICE(0x1eac, 0x1001), /* EM120R-GL (sdx24) */
> +		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
> +	{ PCI_DEVICE(0x1eac, 0x1002), /* EM160R-GL (sdx24) */
> +		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
>  	{  }
>  };
>  MODULE_DEVICE_TABLE(pci, mhi_pci_id_table);
> -- 
> 2.7.4
> 

  reply	other threads:[~2021-03-04  6:33 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-01 16:25 [PATCH 1/6] mhi: pci_generic: Parametrable element count for events Loic Poulain
2021-03-01 16:25 ` [PATCH 2/6] mhi: pci_generic: Introduce quectel EM1XXGR-L support Loic Poulain
2021-03-04  6:32   ` Manivannan Sadhasivam [this message]
2021-03-01 16:25 ` [PATCH 3/6] mhi: pci_generic: Add SDX24 based modem support Loic Poulain
2021-03-04  6:32   ` Manivannan Sadhasivam
2021-03-01 16:25 ` [PATCH 4/6] mhi: pci_generic: No-Op for device_wake operations Loic Poulain
2021-03-04  6:47   ` Manivannan Sadhasivam
2021-03-04  8:34     ` Loic Poulain
2021-03-01 16:25 ` [PATCH 5/6] mhi: pci_generic: Use generic PCI power management Loic Poulain
2021-03-04  6:56   ` Manivannan Sadhasivam
2021-03-04  8:23     ` Loic Poulain
2021-03-01 16:25 ` [PATCH 6/6] mhi: pci_generic: Add support for runtime PM Loic Poulain
2021-03-04  6:31 ` [PATCH 1/6] mhi: pci_generic: Parametrable element count for events Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210304063208.GB3363@thinkpad \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=hemantk@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=loic.poulain@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.