All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	linux-kernel@vger.kernel.org
Cc: Rodolfo Giometti <giometti@enneenne.com>,
	Ryan Govostes <rgovostes@whoi.edu>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: [PATCH resend v1 7/7] pps: clients: gpio: Rearrange optional stuff in pps_gpio_setup()
Date: Tue,  9 Mar 2021 13:24:03 +0200	[thread overview]
Message-ID: <20210309112403.36633-7-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20210309112403.36633-1-andriy.shevchenko@linux.intel.com>

Rearrange optional stuff in pps_gpio_setup() so it will go after mandatory one
and with reduced indentation. This will increase readability of the sources.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pps/clients/pps-gpio.c | 33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/pps/clients/pps-gpio.c b/drivers/pps/clients/pps-gpio.c
index b097da5a659a..35799e6401c9 100644
--- a/drivers/pps/clients/pps-gpio.c
+++ b/drivers/pps/clients/pps-gpio.c
@@ -110,28 +110,31 @@ static int pps_gpio_setup(struct device *dev)
 		return dev_err_probe(dev, PTR_ERR(data->gpio_pin),
 				     "failed to request PPS GPIO\n");
 
+	data->assert_falling_edge =
+		device_property_read_bool(dev, "assert-falling-edge");
+
 	data->echo_pin = devm_gpiod_get_optional(dev, "echo", GPIOD_OUT_LOW);
 	if (IS_ERR(data->echo_pin))
 		return dev_err_probe(dev, PTR_ERR(data->echo_pin),
 				     "failed to request ECHO GPIO\n");
 
-	if (data->echo_pin) {
-		ret = device_property_read_u32(dev, "echo-active-ms", &value);
-		if (ret) {
-			dev_err(dev, "failed to get echo-active-ms from FW\n");
-			return ret;
-		}
-		data->echo_active_ms = value;
-		/* sanity check on echo_active_ms */
-		if (!data->echo_active_ms || data->echo_active_ms > 999) {
-			dev_err(dev, "echo-active-ms: %u - bad value from FW\n",
-				data->echo_active_ms);
-			return -EINVAL;
-		}
+	if (!data->echo_pin)
+		return 0;
+
+	ret = device_property_read_u32(dev, "echo-active-ms", &value);
+	if (ret) {
+		dev_err(dev, "failed to get echo-active-ms from FW\n");
+		return ret;
 	}
 
-	data->assert_falling_edge =
-		device_property_read_bool(dev, "assert-falling-edge");
+	/* sanity check on echo_active_ms */
+	if (!value || value > 999) {
+		dev_err(dev, "echo-active-ms: %u - bad value from FW\n", value);
+		return -EINVAL;
+	}
+
+	data->echo_active_ms = value;
+
 	return 0;
 }
 
-- 
2.30.1


  parent reply	other threads:[~2021-03-09 11:25 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-09 11:23 [PATCH resend v1 1/7] pps: clients: gpio: Bail out on error when requesting GPIO echo line Andy Shevchenko
2021-03-09 11:23 ` [PATCH resend v1 2/7] pps: clients: gpio: Use dev_err_probe() to avoid log noise Andy Shevchenko
2021-03-09 12:25   ` Rodolfo Giometti
2021-03-09 11:23 ` [PATCH resend v1 3/7] pps: clients: gpio: Remove redundant condition in ->remove() Andy Shevchenko
2021-03-09 12:25   ` Rodolfo Giometti
2021-03-09 11:24 ` [PATCH resend v1 4/7] pps: clients: gpio: Get rid of legacy platform data Andy Shevchenko
2021-03-09 12:25   ` Rodolfo Giometti
2021-03-09 11:24 ` [PATCH resend v1 5/7] pps: clients: gpio: Make use of device properties Andy Shevchenko
2021-03-09 12:27   ` Rodolfo Giometti
2021-03-09 11:24 ` [PATCH resend v1 6/7] pps: clients: gpio: Use struct device pointer directly Andy Shevchenko
2021-03-09 12:30   ` Rodolfo Giometti
2021-03-09 11:24 ` Andy Shevchenko [this message]
2021-03-09 12:30   ` [PATCH resend v1 7/7] pps: clients: gpio: Rearrange optional stuff in pps_gpio_setup() Rodolfo Giometti
2021-03-09 12:23 ` [PATCH resend v1 1/7] pps: clients: gpio: Bail out on error when requesting GPIO echo line Rodolfo Giometti
2021-03-15 12:34 ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210309112403.36633-7-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=giometti@enneenne.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rgovostes@whoi.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.