All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marco Cesati <marcocesati@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans de Goede <hdegoede@redhat.com>,
	Larry Finger <Larry.Finger@lwfinger.net>,
	linux-staging@lists.linux.dev
Subject: [PATCH 09/33] Staging: rtl8723bs: remove named enums in rtw_mp.h
Date: Wed, 24 Mar 2021 13:44:32 +0100	[thread overview]
Message-ID: <20210324124456.25221-10-marcocesati@gmail.com> (raw)
In-Reply-To: <20210324124456.25221-1-marcocesati@gmail.com>

Remove the following unnecessary enum definitions in
include/rtw_mp.h:

	enum mp_mode
	enum mpt_rate_index
	enum power_mode
	enum ofdm_tx_mode
	enum encry_ctrl_state
	enum mpt_txpwr_def

Signed-off-by: Marco Cesati <marcocesati@gmail.com>
---
 drivers/staging/rtl8723bs/include/rtw_mp.h | 98 ----------------------
 1 file changed, 98 deletions(-)

diff --git a/drivers/staging/rtl8723bs/include/rtw_mp.h b/drivers/staging/rtl8723bs/include/rtw_mp.h
index ead63cf09fe0..26dec21bf0f1 100644
--- a/drivers/staging/rtl8723bs/include/rtw_mp.h
+++ b/drivers/staging/rtl8723bs/include/rtw_mp.h
@@ -265,97 +265,12 @@ struct mp_priv {
 /* Hardware Registers */
 #define BB_REG_BASE_ADDR		0x800
 
-/* MP variables */
-enum mp_mode {
-	MP_OFF,
-	MP_ON,
-	MP_ERR,
-	MP_CONTINUOUS_TX,
-	MP_SINGLE_CARRIER_TX,
-	MP_CARRIER_SUPPRISSION_TX,
-	MP_SINGLE_TONE_TX,
-	MP_PACKET_TX,
-	MP_PACKET_RX
-};
-
 #define MAX_RF_PATH_NUMS	RF_PATH_MAX
 
 extern u8 mpdatarate[NumRates];
 
-/* MP set force data rate base on the definition. */
-enum mpt_rate_index {
-	/* CCK rate. */
-	MPT_RATE_1M = 0,	/* 0 */
-	MPT_RATE_2M,
-	MPT_RATE_55M,
-	MPT_RATE_11M,	/* 3 */
-
-	/* OFDM rate. */
-	MPT_RATE_6M,	/* 4 */
-	MPT_RATE_9M,
-	MPT_RATE_12M,
-	MPT_RATE_18M,
-	MPT_RATE_24M,
-	MPT_RATE_36M,
-	MPT_RATE_48M,
-	MPT_RATE_54M,	/* 11 */
-
-	/* HT rate. */
-	MPT_RATE_MCS0,	/* 12 */
-	MPT_RATE_MCS1,
-	MPT_RATE_MCS2,
-	MPT_RATE_MCS3,
-	MPT_RATE_MCS4,
-	MPT_RATE_MCS5,
-	MPT_RATE_MCS6,
-	MPT_RATE_MCS7,	/* 19 */
-	MPT_RATE_MCS8,
-	MPT_RATE_MCS9,
-	MPT_RATE_MCS10,
-	MPT_RATE_MCS11,
-	MPT_RATE_MCS12,
-	MPT_RATE_MCS13,
-	MPT_RATE_MCS14,
-	MPT_RATE_MCS15,	/* 27 */
-	/* VHT rate. Total: 20*/
-	MPT_RATE_VHT1SS_MCS0 = 100,/*  To reserve MCS16~MCS31, the index starts from #100. */
-	MPT_RATE_VHT1SS_MCS1, /*  #101 */
-	MPT_RATE_VHT1SS_MCS2,
-	MPT_RATE_VHT1SS_MCS3,
-	MPT_RATE_VHT1SS_MCS4,
-	MPT_RATE_VHT1SS_MCS5,
-	MPT_RATE_VHT1SS_MCS6, /*  #106 */
-	MPT_RATE_VHT1SS_MCS7,
-	MPT_RATE_VHT1SS_MCS8,
-	MPT_RATE_VHT1SS_MCS9,
-	MPT_RATE_VHT2SS_MCS0,
-	MPT_RATE_VHT2SS_MCS1, /*  #111 */
-	MPT_RATE_VHT2SS_MCS2,
-	MPT_RATE_VHT2SS_MCS3,
-	MPT_RATE_VHT2SS_MCS4,
-	MPT_RATE_VHT2SS_MCS5,
-	MPT_RATE_VHT2SS_MCS6, /*  #116 */
-	MPT_RATE_VHT2SS_MCS7,
-	MPT_RATE_VHT2SS_MCS8,
-	MPT_RATE_VHT2SS_MCS9,
-	MPT_RATE_LAST
-};
-
 #define MAX_TX_PWR_INDEX_N_MODE 64	/*  0x3F */
 
-enum power_mode {
-	POWER_LOW = 0,
-	POWER_NORMAL
-};
-
-/*  The following enumeration is used to define the value of Reg0xD00[30:28] or JaguarReg0x914[18:16]. */
-enum ofdm_tx_mode {
-	OFDM_ALL_OFF		= 0,
-	OFDM_ContinuousTx	= 1,
-	OFDM_SingleCarrier	= 2,
-	OFDM_SingleTone		= 4,
-};
-
 #define RX_PKT_BROADCAST	1
 #define RX_PKT_DEST_ADDR	2
 #define RX_PKT_PHY_MATCH	3
@@ -371,19 +286,6 @@ enum ofdm_tx_mode {
 #define Mac_HT_FasleAlarm		0x90000000
 #define Mac_DropPacket			0xA0000000
 
-enum encry_ctrl_state {
-	HW_CONTROL,		/* hw encryption& decryption */
-	SW_CONTROL,		/* sw encryption& decryption */
-	HW_ENCRY_SW_DECRY,	/* hw encryption & sw decryption */
-	SW_ENCRY_HW_DECRY	/* sw encryption & hw decryption */
-};
-
-enum mpt_txpwr_def {
-	MPT_CCK,
-	MPT_OFDM, /*  L and HT OFDM */
-	MPT_VHT_OFDM
-};
-
 #define		REG_RF_BB_GAIN_OFFSET	0x7f
 #define		RF_GAIN_OFFSET_MASK	0xfffff
 
-- 
2.30.2


  parent reply	other threads:[~2021-03-24 12:44 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-24 12:44 [PATCH 00/33] Staging: rtl8723bs: remove unnecessary enum names and definitions Marco Cesati
2021-03-24 12:44 ` [PATCH 01/33] Staging: rtl8723bs: remove named enums in rtw_mlme.h Marco Cesati
2021-03-24 13:42   ` Dan Carpenter
2021-03-24 15:01     ` Marco Cesati
2021-03-24 12:44 ` [PATCH 02/33] Staging: rtl8723bs: remove named enums in rtw_cmd.h Marco Cesati
2021-03-24 12:44 ` [PATCH 03/33] Staging: rtl8723bs: remove named enums in rtw_eeprom.h Marco Cesati
2021-03-24 12:44 ` [PATCH 04/33] Staging: rtl8723bs: remove named enums in hal_com.h Marco Cesati
2021-03-24 12:44 ` [PATCH 05/33] Staging: rtl8723bs: remove named enums in rtw_recv.h Marco Cesati
2021-03-24 12:44 ` [PATCH 06/33] Staging: rtl8723bs: remove named enums in drv_types.h Marco Cesati
2021-03-24 12:44 ` [PATCH 07/33] Staging: rtl8723bs: remove named enums in rtw_ht.h Marco Cesati
2021-03-24 12:44 ` [PATCH 08/33] Staging: rtl8723bs: remove named enums in wlan_bssdef.h Marco Cesati
2021-03-24 12:44 ` Marco Cesati [this message]
2021-03-24 12:44 ` [PATCH 10/33] Staging: rtl8723bs: remove named enums in osdep_service.h Marco Cesati
2021-03-24 12:44 ` [PATCH 11/33] Staging: rtl8723bs: remove named enums in hal_intf.h Marco Cesati
2021-03-24 12:44 ` [PATCH 12/33] Staging: rtl8723bs: remove named enums in rtw_pwrctrl.h Marco Cesati
2021-03-24 12:44 ` [PATCH 13/33] Staging: rtl8723bs: remove named enums in rtl8723b_cmd.h Marco Cesati
2021-03-24 12:44 ` [PATCH 14/33] Staging: rtl8723bs: remove named enums in hal_com_h2c.h Marco Cesati
2021-03-24 12:44 ` [PATCH 15/33] Staging: rtl8723bs: remove named enums in rtw_wifi_regd.h Marco Cesati
2021-03-24 12:44 ` [PATCH 16/33] Staging: rtl8723bs: remove named enums in wifi.h Marco Cesati
2021-03-24 12:44 ` [PATCH 17/33] Staging: rtl8723bs: remove named enums in rtl8723b_hal.h Marco Cesati
2021-03-24 12:44 ` [PATCH 18/33] Staging: rtl8723bs: remove named enums in hal_phy.h Marco Cesati
2021-03-24 12:44 ` [PATCH 19/33] Staging: rtl8723bs: remove named enums in rtw_mlme_ext.h Marco Cesati
2021-03-24 12:44 ` [PATCH 20/33] Staging: rtl8723bs: remove named enums in rtw_xmit.h Marco Cesati
2021-03-24 12:44 ` [PATCH 21/33] Staging: rtl8723bs: remove named enums in rtw_rf.h Marco Cesati
2021-03-24 12:44 ` [PATCH 22/33] Staging: rtl8723bs: remove named enums in HalPwrSeqCmd.h Marco Cesati
2021-03-24 12:44 ` [PATCH 23/33] Staging: rtl8723bs: remove named enums in hal_com_phycfg.h Marco Cesati
2021-03-24 12:44 ` [PATCH 24/33] Staging: rtl8723bs: remove named enums in ieee80211.h Marco Cesati
2021-03-24 12:44 ` [PATCH 25/33] Staging: rtl8723bs: remove named enums in rtw_efuse.h Marco Cesati
2021-03-24 12:44 ` [PATCH 26/33] Staging: rtl8723bs: remove named enums in odm_interface.h Marco Cesati
2021-03-24 12:44 ` [PATCH 27/33] Staging: rtl8723bs: remove named enums in HalBtcOutSrc.h Marco Cesati
2021-03-24 12:44 ` [PATCH 28/33] Staging: rtl8723bs: remove named enums in HalBtc8723b1Ant.h Marco Cesati
2021-03-24 12:44 ` [PATCH 29/33] Staging: rtl8723bs: remove named enums in odm_types.h Marco Cesati
2021-03-24 12:44 ` [PATCH 30/33] Staging: rtl8723bs: remove named enums in odm_DIG.h Marco Cesati
2021-03-24 12:44 ` [PATCH 31/33] Staging: rtl8723bs: remove named enums in HalPhyRf.h Marco Cesati
2021-03-24 12:44 ` [PATCH 32/33] Staging: rtl8723bs: remove named enums in odm.h Marco Cesati
2021-03-24 12:44 ` [PATCH 33/33] Staging: rtl8723bs: remove named enums in HalBtc8723b2Ant.h Marco Cesati
2021-03-26 14:04 ` [PATCH 00/33] Staging: rtl8723bs: remove unnecessary enum names and definitions Greg Kroah-Hartman
2021-03-26 15:37   ` Marco Cesati
2021-03-26 16:09     ` Dan Carpenter
2021-03-26 16:19       ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210324124456.25221-10-marcocesati@gmail.com \
    --to=marcocesati@gmail.com \
    --cc=Larry.Finger@lwfinger.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=hdegoede@redhat.com \
    --cc=linux-staging@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.