All of lore.kernel.org
 help / color / mirror / Atom feed
From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>, Jason Gunthorpe <jgg@nvidia.com>
Cc: Leon Romanovsky <leonro@nvidia.com>,
	Devesh Sharma <devesh.sharma@broadcom.com>,
	linux-rdma@vger.kernel.org,
	Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>,
	Selvin Xavier <selvin.xavier@broadcom.com>,
	Somnath Kotur <somnath.kotur@broadcom.com>,
	Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Subject: [PATCH rdma-next] bnxt_re: Rely on Kconfig to keep module dependency
Date: Wed, 24 Mar 2021 16:25:24 +0200	[thread overview]
Message-ID: <20210324142524.1135319-1-leon@kernel.org> (raw)

From: Leon Romanovsky <leonro@nvidia.com>

Instead of manually messing with parent driver module reference
counting, rely on "depends on" keyword to ensure that proper
probe/remove chain is performed.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
---
 drivers/infiniband/hw/bnxt_re/Kconfig |  4 +---
 drivers/infiniband/hw/bnxt_re/main.c  | 20 +++++---------------
 2 files changed, 6 insertions(+), 18 deletions(-)

diff --git a/drivers/infiniband/hw/bnxt_re/Kconfig b/drivers/infiniband/hw/bnxt_re/Kconfig
index 0feac5132ce1..b4779a6cd565 100644
--- a/drivers/infiniband/hw/bnxt_re/Kconfig
+++ b/drivers/infiniband/hw/bnxt_re/Kconfig
@@ -2,9 +2,7 @@
 config INFINIBAND_BNXT_RE
 	tristate "Broadcom Netxtreme HCA support"
 	depends on 64BIT
-	depends on ETHERNET && NETDEVICES && PCI && INET && DCB
-	select NET_VENDOR_BROADCOM
-	select BNXT
+	depends on ETHERNET && NETDEVICES && PCI && INET && DCB && BNXT
 	help
 	  This driver supports Broadcom NetXtreme-E 10/25/40/50 gigabit
 	  RoCE HCAs.  To compile this driver as a module, choose M here:
diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c
index fdb8c2478258..a81adb07e5d9 100644
--- a/drivers/infiniband/hw/bnxt_re/main.c
+++ b/drivers/infiniband/hw/bnxt_re/main.c
@@ -561,13 +561,6 @@ static struct bnxt_re_dev *bnxt_re_from_netdev(struct net_device *netdev)
 	return container_of(ibdev, struct bnxt_re_dev, ibdev);
 }
 
-static void bnxt_re_dev_unprobe(struct net_device *netdev,
-				struct bnxt_en_dev *en_dev)
-{
-	dev_put(netdev);
-	module_put(en_dev->pdev->driver->driver.owner);
-}
-
 static struct bnxt_en_dev *bnxt_re_dev_probe(struct net_device *netdev)
 {
 	struct bnxt *bp = netdev_priv(netdev);
@@ -593,10 +586,6 @@ static struct bnxt_en_dev *bnxt_re_dev_probe(struct net_device *netdev)
 		return ERR_PTR(-ENODEV);
 	}
 
-	/* Bump net device reference count */
-	if (!try_module_get(pdev->driver->driver.owner))
-		return ERR_PTR(-ENODEV);
-
 	dev_hold(netdev);
 
 	return en_dev;
@@ -1523,13 +1512,14 @@ static int bnxt_re_dev_init(struct bnxt_re_dev *rdev, u8 wqe_mode)
 
 static void bnxt_re_dev_unreg(struct bnxt_re_dev *rdev)
 {
-	struct bnxt_en_dev *en_dev = rdev->en_dev;
 	struct net_device *netdev = rdev->netdev;
 
 	bnxt_re_dev_remove(rdev);
 
-	if (netdev)
-		bnxt_re_dev_unprobe(netdev, en_dev);
+	if (!netdev)
+		return;
+
+	dev_put(netdev);
 }
 
 static int bnxt_re_dev_reg(struct bnxt_re_dev **rdev, struct net_device *netdev)
@@ -1551,7 +1541,7 @@ static int bnxt_re_dev_reg(struct bnxt_re_dev **rdev, struct net_device *netdev)
 	*rdev = bnxt_re_dev_add(netdev, en_dev);
 	if (!*rdev) {
 		rc = -ENOMEM;
-		bnxt_re_dev_unprobe(netdev, en_dev);
+		dev_put(netdev);
 		goto exit;
 	}
 exit:
-- 
2.30.2


             reply	other threads:[~2021-03-24 14:26 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-24 14:25 Leon Romanovsky [this message]
2021-03-24 15:07 ` [PATCH rdma-next] bnxt_re: Rely on Kconfig to keep module dependency Jason Gunthorpe
2021-03-24 15:16   ` Leon Romanovsky
2021-03-24 16:30     ` Devesh Sharma
2021-03-24 16:56       ` Jason Gunthorpe
2021-03-24 17:24         ` Devesh Sharma
2021-03-24 17:35           ` Jason Gunthorpe
2021-03-25  8:40             ` Leon Romanovsky
2021-03-26  6:09               ` Devesh Sharma

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210324142524.1135319-1-leon@kernel.org \
    --to=leon@kernel.org \
    --cc=devesh.sharma@broadcom.com \
    --cc=dledford@redhat.com \
    --cc=jgg@nvidia.com \
    --cc=leonro@nvidia.com \
    --cc=linux-rdma@vger.kernel.org \
    --cc=nareshkumar.pbs@broadcom.com \
    --cc=selvin.xavier@broadcom.com \
    --cc=somnath.kotur@broadcom.com \
    --cc=sriharsha.basavapatna@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.