From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Bhaumik Bhatt <bbhatt@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org, hemantk@codeaurora.org,
jhugo@codeaurora.org, linux-kernel@vger.kernel.org,
carl.yin@quectel.com, naveen.kumar@quectel.com,
loic.poulain@linaro.org
Subject: Re: [PATCH v6 1/2] bus: mhi: core: Introduce internal register poll helper function
Date: Thu, 1 Apr 2021 00:08:27 +0530 [thread overview]
Message-ID: <20210331183827.GM15610@work> (raw)
In-Reply-To: <1617215665-19593-2-git-send-email-bbhatt@codeaurora.org>
On Wed, Mar 31, 2021 at 11:34:24AM -0700, Bhaumik Bhatt wrote:
> Introduce helper function to allow MHI core driver to poll for
> a value in a register field. This helps reach a common path to
> read and poll register values along with a retry time interval.
>
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Thanks,
Mani
> ---
> drivers/bus/mhi/core/internal.h | 3 +++
> drivers/bus/mhi/core/main.c | 23 +++++++++++++++++++++++
> 2 files changed, 26 insertions(+)
>
> diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
> index 7aa5cfd..e690f15 100644
> --- a/drivers/bus/mhi/core/internal.h
> +++ b/drivers/bus/mhi/core/internal.h
> @@ -646,6 +646,9 @@ int __must_check mhi_read_reg(struct mhi_controller *mhi_cntrl,
> int __must_check mhi_read_reg_field(struct mhi_controller *mhi_cntrl,
> void __iomem *base, u32 offset, u32 mask,
> u32 shift, u32 *out);
> +int __must_check mhi_poll_reg_field(struct mhi_controller *mhi_cntrl,
> + void __iomem *base, u32 offset, u32 mask,
> + u32 shift, u32 val, u32 delayus);
> void mhi_write_reg(struct mhi_controller *mhi_cntrl, void __iomem *base,
> u32 offset, u32 val);
> void mhi_write_reg_field(struct mhi_controller *mhi_cntrl, void __iomem *base,
> diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> index 8b68657..58b8111 100644
> --- a/drivers/bus/mhi/core/main.c
> +++ b/drivers/bus/mhi/core/main.c
> @@ -4,6 +4,7 @@
> *
> */
>
> +#include <linux/delay.h>
> #include <linux/device.h>
> #include <linux/dma-direction.h>
> #include <linux/dma-mapping.h>
> @@ -37,6 +38,28 @@ int __must_check mhi_read_reg_field(struct mhi_controller *mhi_cntrl,
> return 0;
> }
>
> +int __must_check mhi_poll_reg_field(struct mhi_controller *mhi_cntrl,
> + void __iomem *base, u32 offset,
> + u32 mask, u32 shift, u32 val, u32 delayus)
> +{
> + int ret;
> + u32 out, retry = (mhi_cntrl->timeout_ms * 1000) / delayus;
> +
> + while (retry--) {
> + ret = mhi_read_reg_field(mhi_cntrl, base, offset, mask, shift,
> + &out);
> + if (ret)
> + return ret;
> +
> + if (out == val)
> + return 0;
> +
> + fsleep(delayus);
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> void mhi_write_reg(struct mhi_controller *mhi_cntrl, void __iomem *base,
> u32 offset, u32 val)
> {
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
next prev parent reply other threads:[~2021-03-31 18:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-31 18:34 [PATCH v6 0/2] Polling for MHI ready Bhaumik Bhatt
2021-03-31 18:34 ` [PATCH v6 1/2] bus: mhi: core: Introduce internal register poll helper function Bhaumik Bhatt
2021-03-31 18:38 ` Manivannan Sadhasivam [this message]
2021-03-31 18:34 ` [PATCH v6 2/2] bus: mhi: core: Move to polling method to wait for MHI ready Bhaumik Bhatt
2021-03-31 18:39 ` Manivannan Sadhasivam
2021-03-31 18:41 ` [PATCH v6 0/2] Polling " Manivannan Sadhasivam
2021-05-26 19:03 ` patchwork-bot+linux-arm-msm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210331183827.GM15610@work \
--to=manivannan.sadhasivam@linaro.org \
--cc=bbhatt@codeaurora.org \
--cc=carl.yin@quectel.com \
--cc=hemantk@codeaurora.org \
--cc=jhugo@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=loic.poulain@linaro.org \
--cc=naveen.kumar@quectel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.