[PATCH 5.11 070/152] ACPI: scan: Fix _STA getting called on devices with unmet dependencies

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Hans de Goede <hdegoede@redhat.com>

commit 3e759425cc3cf9a43392309819d34c65a3644c59 upstream.

Commit 71da201f38df ("ACPI: scan: Defer enumeration of devices with
_DEP lists") dropped the following 2 lines from acpi_init_device_object():

	/* Assume there are unmet deps until acpi_device_dep_initialize() runs */
	device->dep_unmet = 1;

Leaving the initial value of dep_unmet at the 0 from the kzalloc(). This
causes the acpi_bus_get_status() call in acpi_add_single_object() to
actually call _STA, even though there maybe unmet deps, leading to errors
like these:

[    0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c)
               [GenericSerialBus] (20170831/evregion-166)
[    0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler
               (20170831/exfldio-299)
[    0.123618] ACPI Error: Method parse/execution failed
               \_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550)

Fix this by re-adding the dep_unmet = 1 initialization to
acpi_init_device_object() and modifying acpi_bus_check_add() to make sure
that dep_unmet always gets setup there, overriding the initial 1 value.

This re-fixes the issue initially fixed by
commit 63347db0affa ("ACPI / scan: Use acpi_bus_get_status() to initialize
ACPI_TYPE_DEVICE devs"), which introduced the removed
"device->dep_unmet = 1;" statement.

This issue was noticed; and the fix tested on a Dell Venue 10 Pro 5055.

Fixes: 71da201f38df ("ACPI: scan: Defer enumeration of devices with _DEP lists")
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 5.11+ <stable@vger.kernel.org> # 5.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/scan.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1669,6 +1669,8 @@ void acpi_init_device_object(struct acpi
 	device_initialize(&device->dev);
 	dev_set_uevent_suppress(&device->dev, true);
 	acpi_init_coherency(device);
+	/* Assume there are unmet deps to start with. */
+	device->dep_unmet = 1;
 }
 
 void acpi_device_add_finalize(struct acpi_device *device)
@@ -1934,6 +1936,8 @@ static void acpi_scan_dep_init(struct ac
 {
 	struct acpi_dep_data *dep;
 
+	adev->dep_unmet = 0;
+
 	mutex_lock(&acpi_dep_list_lock);
 
 	list_for_each_entry(dep, &acpi_dep_list, node) {
@@ -1981,7 +1985,13 @@ static acpi_status acpi_bus_check_add(ac
 		return AE_CTRL_DEPTH;
 
 	acpi_scan_init_hotplug(device);
-	if (!check_dep)
+	/*
+	 * If check_dep is true at this point, the device has no dependencies,
+	 * or the creation of the device object would have been postponed above.
+	 */
+	if (check_dep)
+		device->dep_unmet = 0;
+	else
 		acpi_scan_dep_init(device);
 
 out: