[PATCH v2] watchdog: imx_sc_wdt: fix pretimeout

[eichest@gmail.com]

From: Stefan Eichenberger <eichest@gmail.com>

If the WDIOF_PRETIMEOUT flag is not set when registering the device the
driver will not show the sysfs entries or register the default governor.
By moving the registering after the decision whether pretimeout is
supported this gets fixed.

Signed-off-by: Stefan Eichenberger <eichest@gmail.com>
---
 drivers/watchdog/imx_sc_wdt.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/watchdog/imx_sc_wdt.c b/drivers/watchdog/imx_sc_wdt.c
index e9ee22a7cb45..8ac021748d16 100644
--- a/drivers/watchdog/imx_sc_wdt.c
+++ b/drivers/watchdog/imx_sc_wdt.c
@@ -183,16 +183,12 @@ static int imx_sc_wdt_probe(struct platform_device *pdev)
 	watchdog_stop_on_reboot(wdog);
 	watchdog_stop_on_unregister(wdog);
 
-	ret = devm_watchdog_register_device(dev, wdog);
-	if (ret)
-		return ret;
-
 	ret = imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
 				       SC_IRQ_WDOG,
 				       true);
 	if (ret) {
 		dev_warn(dev, "Enable irq failed, pretimeout NOT supported\n");
-		return 0;
+		goto register_device;
 	}
 
 	imx_sc_wdd->wdt_notifier.notifier_call = imx_sc_wdt_notify;
@@ -203,7 +199,7 @@ static int imx_sc_wdt_probe(struct platform_device *pdev)
 					 false);
 		dev_warn(dev,
 			 "Register irq notifier failed, pretimeout NOT supported\n");
-		return 0;
+		goto register_device;
 	}
 
 	ret = devm_add_action_or_reset(dev, imx_sc_wdt_action,
@@ -213,7 +209,8 @@ static int imx_sc_wdt_probe(struct platform_device *pdev)
 	else
 		dev_warn(dev, "Add action failed, pretimeout NOT supported\n");
 
-	return 0;
+register_device:
+	return devm_watchdog_register_device(dev, wdog);
 }
 
 static int __maybe_unused imx_sc_wdt_suspend(struct device *dev)
-- 
2.27.0