Re: [PATCH] mhi: pci_generic: Add FIREHOSE channels

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Wed, Apr 07, 2021 at 10:41:00AM +0200, Loic Poulain wrote:
> When device enters flash programmer context (FP), it exposes firehose
> protocol through the EDL dedicated channels.
> 
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>

Applied to mhi-next!

Thanks,
Mani

> ---
>  drivers/bus/mhi/pci_generic.c | 35 +++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 
> diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c
> index 544853c..fda3e88d 100644
> --- a/drivers/bus/mhi/pci_generic.c
> +++ b/drivers/bus/mhi/pci_generic.c
> @@ -145,6 +145,36 @@ struct mhi_pci_dev_info {
>  		.doorbell_mode_switch = false,		\
>  	}
>  
> +#define MHI_CHANNEL_CONFIG_UL_FP(ch_num, ch_name, el_count, ev_ring) \
> +	{						\
> +		.num = ch_num,				\
> +		.name = ch_name,			\
> +		.num_elements = el_count,		\
> +		.event_ring = ev_ring,			\
> +		.dir = DMA_TO_DEVICE,			\
> +		.ee_mask = BIT(MHI_EE_FP),		\
> +		.pollcfg = 0,				\
> +		.doorbell = MHI_DB_BRST_DISABLE,	\
> +		.lpm_notify = false,			\
> +		.offload_channel = false,		\
> +		.doorbell_mode_switch = false,		\
> +	}						\
> +
> +#define MHI_CHANNEL_CONFIG_DL_FP(ch_num, ch_name, el_count, ev_ring) \
> +	{						\
> +		.num = ch_num,				\
> +		.name = ch_name,			\
> +		.num_elements = el_count,		\
> +		.event_ring = ev_ring,			\
> +		.dir = DMA_FROM_DEVICE,			\
> +		.ee_mask = BIT(MHI_EE_FP),		\
> +		.pollcfg = 0,				\
> +		.doorbell = MHI_DB_BRST_DISABLE,	\
> +		.lpm_notify = false,			\
> +		.offload_channel = false,		\
> +		.doorbell_mode_switch = false,		\
> +	}
> +
>  #define MHI_EVENT_CONFIG_DATA(ev_ring, el_count) \
>  	{					\
>  		.num_elements = el_count,	\
> @@ -181,6 +211,8 @@ static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = {
>  	MHI_CHANNEL_CONFIG_DL(15, "QMI", 4, 0),
>  	MHI_CHANNEL_CONFIG_UL(20, "IPCR", 8, 0),
>  	MHI_CHANNEL_CONFIG_DL(21, "IPCR", 8, 0),
> +	MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
> +	MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
>  	MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 2),
>  	MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 3),
>  };
> @@ -241,6 +273,9 @@ static const struct mhi_channel_config mhi_quectel_em1xx_channels[] = {
>  	MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0),
>  	MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
>  	MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
> +	/* The EDL firmware is a flash-programmer exposing firehose protocol */
> +	MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
> +	MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
>  	MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2),
>  	MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3),
>  };
> -- 
> 2.7.4
>