Re: [PATCH RFC net-next 0/3] Multi-CPU DSA support

[Marek Behun <marek.behun@nic.cz>]

On Sat, 10 Apr 2021 15:34:46 +0200
Ansuel Smith <ansuelsmth@gmail.com> wrote:

> Hi,
> this is a respin of the Marek series in hope that this time we can
> finally make some progress with dsa supporting multi-cpu port.
> 
> This implementation is similar to the Marek series but with some tweaks.
> This adds support for multiple-cpu port but leave the driver the
> decision of the type of logic to use about assigning a CPU port to the
> various port. The driver can also provide no preference and the CPU port
> is decided using a round-robin way.

In the last couple of months I have been giving some thought to this
problem, and came up with one important thing: if there are multiple
upstream ports, it would make a lot of sense to dynamically reallocate
them to each user port, based on which user port is actually used, and
at what speed.

For example on Turris Omnia we have 2 CPU ports and 5 user ports. All
ports support at most 1 Gbps. Round-robin would assign:
  CPU port 0 - Port 0
  CPU port 1 - Port 1
  CPU port 0 - Port 2
  CPU port 1 - Port 3
  CPU port 0 - Port 4

Now suppose that the user plugs ethernet cables only into ports 0 and 2,
with 1, 3 and 4 free:
  CPU port 0 - Port 0 (plugged)
  CPU port 1 - Port 1 (free)
  CPU port 0 - Port 2 (plugged)
  CPU port 1 - Port 3 (free)
  CPU port 0 - Port 4 (free)

We end up in a situation where ports 0 and 2 share 1 Gbps bandwidth to
CPU, and the second CPU port is not used at all.

A mechanism for automatic reassignment of CPU ports would be ideal here.

What do you guys think?

Marek