Re: [PATCH v2 2/3] dt-bindings: mfd: pm8008: Add bindings

[Guru Das Srinagesh <gurus@codeaurora.org>]

On Mon, Apr 12, 2021 at 02:37:48PM -0500, Rob Herring wrote:
> On Fri, Apr 09, 2021 at 05:55:01PM -0700, Guru Das Srinagesh wrote:
> > Add bindings for the Qualcomm Technologies, Inc. PM8008 MFD driver.
> > 
> > Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
> > ---
> >  .../devicetree/bindings/mfd/qcom,pm8008.yaml       | 119 +++++++++++++++++++++
> >  1 file changed, 119 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
> > new file mode 100644
> > index 0000000..0cafa98
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
> > @@ -0,0 +1,119 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mfd/qcom,pm8008.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm Technologies, Inc. PM8008 PMIC bindings
> > +
> > +maintainers:
> > +  - Guru Das Srinagesh <gurus@codeaurora.org>
> > +
> > +description: |
> > +  Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates
> > +  all the necessary power management, housekeeping, and interface support
> > +  functions into a single IC.
> > +
> > +properties:
> > +  compatible:
> > +    const: qcom,pm8008
> > +
> > +  reg:
> > +    description:
> > +      I2C slave address.
> > +
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +    description: Parent interrupt.
> > +
> > +  "#interrupt-cells":
> > +    const: 2
> > +
> > +    description: |
> > +      The first cell is the IRQ number, the second cell is the IRQ trigger
> > +      flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h.
> > +
> > +  interrupt-controller: true
> > +
> > +  "#address-cells":
> > +    const: 1
> > +
> > +  "#size-cells":
> > +    const: 0
> > +
> > +patternProperties:
> > +  "^pinctrl@[0-9a-f]+$":
> 
> Doesn't look like a pin controller. 'gpio@...' instead.

Done.

> 
> > +    type: object
> 
>        additionalProperties: false

Done.

Thank you.
Guru Das.