From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Richard Weinberger <richard@nod.at>
Cc: linux-mtd@lists.infradead.org,
Tudor Ambarus <Tudor.Ambarus@microchip.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Frieder Schrempf <frieder.schrempf@kontron.de>
Subject: [GIT PULL] mtd: nand: Changes for 5.13
Date: Tue, 13 Apr 2021 11:02:49 +0200 [thread overview]
Message-ID: <20210413110249.04d5d368@xps13> (raw)
Hello,
This is the NAND PR for 5.13.
Thanks,
Miquèl
The following changes since commit a38fd8748464831584a19438cbb3082b5a2dab15:
Linux 5.12-rc2 (2021-03-05 17:33:41 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git tags/nand/for-5.13
for you to fetch changes up to 32cbc7cb70b07041e82f897f96b3035358470b14:
mtd: rawnand: qcom: Use dma_mapping_error() for error check (2021-04-07 10:07:46 +0200)
----------------------------------------------------------------
MTD core:
* Handle possible -EPROBE_DEFER from parse_mtd_partitions()
NAND core:
* Fix error handling in nand_prog_page_op() (x2)
* Add a helper to retrieve the number of ECC bytes per step
* Add a helper to retrieve the number of ECC steps
* Let ECC engines advertize the exact number of steps
* ECC Hamming:
- Populate the public nsteps field
- Use the public nsteps field
* ECC BCH:
- Populate the public nsteps field
- Use the public nsteps field
Raw NAND core:
* Add support for secure regions in NAND memory
* Try not to use the ECC private structures
* Remove duplicate include in rawnand.h
* BBT:
- Skip bad blocks when searching for the BBT in NAND
Raw NAND controller drivers:
* Qcom:
- Convert bindings to YAML
- Use dma_mapping_error() for error check
- Add missing nand_cleanup() in error path
- Return actual error code instead of -ENODEV
- Update last code word register
- Add helper to configure location register
- Rename parameter name in macro
- Add helper to check last code word
- Convert nandc to chip in Read/Write helper
- Update register macro name for 0x2c offset
* GPMI:
- Fix a double free in gpmi_nand_init
* Rockchip:
- Use flexible-array member instead of zero-length array
* Atmel:
- Update ecc_stats.corrected counter
* MXC:
- Remove unneeded of_match_ptr()
* R852:
- replace spin_lock_irqsave by spin_lock in hard IRQ
* Brcmnand:
- Move to polling in pio mode on oops write
- Read/write oob during EDU transfer
- Fix OOB R/W with Hamming ECC
* FSMC:
- Fix error code in fsmc_nand_probe()
* OMAP:
- Use ECC information from the generic structures
SPI-NAND core:
* Add missing MODULE_DEVICE_TABLE()
SPI-NAND drivers:
* gigadevice: Support GD5F1GQ5UExxG
----------------------------------------------------------------
Alexander Lobakin (1):
mtd: spinand: core: add missing MODULE_DEVICE_TABLE()
Dan Carpenter (1):
mtd: rawnand: fsmc: Fix error code in fsmc_nand_probe()
Fabio Estevam (1):
mtd: rawnand: mxc: Remove unneeded of_match_ptr()
Kai Stuhlemmer (ebee Engineering) (1):
mtd: rawnand: atmel: Update ecc_stats.corrected counter
Kamal Dasu (2):
mtd: rawnand: brcmnand: read/write oob during EDU transfer
mtd: rawnand: brcmnand: move to polling in pio mode on oops write
Lv Yunlong (1):
mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init
Manivannan Sadhasivam (7):
mtd: Handle possible -EPROBE_DEFER from parse_mtd_partitions()
mtd: rawnand: qcom: Return actual error code instead of -ENODEV
dt-bindings: mtd: Convert Qcom NANDc binding to YAML
dt-bindings: mtd: Add a property to declare secure regions in NAND chips
mtd: rawnand: Add support for secure regions in NAND memory
mtd: rawnand: qcom: Add missing nand_cleanup() in error path
mtd: rawnand: qcom: Use dma_mapping_error() for error check
Md Sadre Alam (6):
mtd: rawnand: qcom: Update register macro name for 0x2c offset
mtd: rawnand: qcom: Convert nandc to chip in Read/Write helper
mtd: rawnand: qcom: Add helper to check last code word
mtd: rawnand: qcom: Rename parameter name in macro
mtd: rawnand: qcom: Add helper to configure location register
mtd: rawnand: qcom: update last code word register
Miquel Raynal (9):
mtd: nand: Let ECC engines advertize the exact number of steps
mtd: nand: ecc-bch: Populate the public nsteps field
mtd: nand: ecc-hamming: Populate the public nsteps field
mtd: nand: Add a helper to retrieve the number of ECC steps
mtd: nand: Add a helper to retrieve the number of ECC bytes per step
mtd: rawnand: Try not to use the ECC private structures
mtd: rawnand: omap: Use ECC information from the generic structures
mtd: nand: ecc-bch: Use the public nsteps field
mtd: nand: ecc-hamming: Use the public nsteps field
Reto Schneider (1):
mtd: spinand: gigadevice: Support GD5F1GQ5UExxG
Sascha Hauer (2):
mtd: nand: fix error handling in nand_prog_page_op() #1
mtd: nand: fix error handling in nand_prog_page_op() #2
Stefan Riedmueller (1):
mtd: rawnand: bbt: Skip bad blocks when searching for the BBT in NAND
Tian Tao (1):
mtd: rawnand: r852: replace spin_lock_irqsave by spin_lock in hard IRQ
Zhang Yunkai (1):
mtd: rawnand: remove duplicate include in rawnand.h
Zou Wei (1):
mtd: rawnand: rockchip: Use flexible-array member instead of zero-length array
Álvaro Fernández Rojas (1):
mtd: rawnand: brcmnand: fix OOB R/W with Hamming ECC
Documentation/devicetree/bindings/mtd/nand-controller.yaml | 7 +
Documentation/devicetree/bindings/mtd/qcom,nandc.yaml | 196 ++++++++++++++++++++++++++++
Documentation/devicetree/bindings/mtd/qcom_nandc.txt | 142 --------------------
drivers/mtd/mtdcore.c | 3 +
drivers/mtd/nand/ecc-sw-bch.c | 10 +-
drivers/mtd/nand/ecc-sw-hamming.c | 10 +-
drivers/mtd/nand/raw/atmel/nand-controller.c | 6 +-
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 69 +++++++++-
drivers/mtd/nand/raw/fsmc_nand.c | 2 +
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/nand/raw/mxc_nand.c | 2 +-
drivers/mtd/nand/raw/nand_base.c | 145 +++++++++++++++++----
drivers/mtd/nand/raw/nand_bbt.c | 5 +
drivers/mtd/nand/raw/omap2.c | 14 +-
drivers/mtd/nand/raw/qcom_nandc.c | 263 +++++++++++++++++++++++---------------
drivers/mtd/nand/raw/r852.c | 5 +-
drivers/mtd/nand/raw/rockchip-nand-controller.c | 2 +-
drivers/mtd/nand/spi/core.c | 2 +
drivers/mtd/nand/spi/gigadevice.c | 69 ++++++++--
include/linux/mtd/nand-ecc-sw-bch.h | 2 -
include/linux/mtd/nand-ecc-sw-hamming.h | 2 -
include/linux/mtd/nand.h | 22 ++++
include/linux/mtd/rawnand.h | 15 ++-
23 files changed, 682 insertions(+), 313 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
delete mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next reply other threads:[~2021-04-13 9:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-13 9:02 Miquel Raynal [this message]
2021-04-15 19:17 ` [GIT PULL] mtd: nand: Changes for 5.13 Richard Weinberger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210413110249.04d5d368@xps13 \
--to=miquel.raynal@bootlin.com \
--cc=Tudor.Ambarus@microchip.com \
--cc=frieder.schrempf@kontron.de \
--cc=linux-mtd@lists.infradead.org \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.