Re: [PATCH v2 net-next 5/5] dt-bindings: net: dsa: Document dsa,tag-protocol property

[Rob Herring <robh@kernel.org>]

On Thu, Apr 15, 2021 at 11:26:10AM +0200, Tobias Waldekranz wrote:
> The 'dsa,tag-protocol' is used to force a switch tree to use a
> particular tag protocol, typically because the Ethernet controller
> that it is connected to is not compatible with the default one.
> 
> Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
> ---
>  Documentation/devicetree/bindings/net/dsa/dsa.yaml | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> index 8a3494db4d8d..c4dec0654c6a 100644
> --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> @@ -70,6 +70,15 @@ patternProperties:
>                device is what the switch port is connected to
>              $ref: /schemas/types.yaml#/definitions/phandle
>  
> +          dsa,tag-protocol:

'dsa' is not a vendor. 'dsa-tag-protocol' instead.

> +            description:
> +              Instead of the default, the switch will use this tag protocol if
> +              possible. Useful when a device supports multiple protcols and
> +              the default is incompatible with the Ethernet device.
> +            enum:
> +              - dsa
> +              - edsa
> +
>            phy-handle: true
>  
>            phy-mode: true
> -- 
> 2.25.1
>