From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>,
James Bottomley <james.bottomley@hansenpartnership.com>,
linux-scsi@vger.kernel.org, Bart van Assche <bvanassche@acm.org>,
Hannes Reinecke <hare@suse.de>
Subject: [PATCH 33/39] FlashPoint: Use standard SCSI definitions
Date: Fri, 23 Apr 2021 13:39:38 +0200 [thread overview]
Message-ID: <20210423113944.42672-34-hare@suse.de> (raw)
In-Reply-To: <20210423113944.42672-1-hare@suse.de>
No point in having the driver providing its own definitions.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/FlashPoint.c | 165 ++++++++++++++++----------------------
1 file changed, 69 insertions(+), 96 deletions(-)
diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c
index 0464e37c806a..ee9e4028c0f3 100644
--- a/drivers/scsi/FlashPoint.c
+++ b/drivers/scsi/FlashPoint.c
@@ -304,40 +304,12 @@ typedef struct SCCBscam_info {
} SCCBSCAM_INFO;
-#define SCSI_REQUEST_SENSE 0x03
-#define SCSI_READ 0x08
-#define SCSI_WRITE 0x0A
-#define SCSI_START_STOP_UNIT 0x1B
-#define SCSI_READ_EXTENDED 0x28
-#define SCSI_WRITE_EXTENDED 0x2A
-#define SCSI_WRITE_AND_VERIFY 0x2E
-
-#define SSGOOD 0x00
-#define SSCHECK 0x02
-#define SSQ_FULL 0x28
-
-#define SMCMD_COMP 0x00
-#define SMEXT 0x01
-#define SMSAVE_DATA_PTR 0x02
-#define SMREST_DATA_PTR 0x03
-#define SMDISC 0x04
-#define SMABORT 0x06
-#define SMREJECT 0x07
-#define SMNO_OP 0x08
-#define SMPARITY 0x09
-#define SMDEV_RESET 0x0C
-#define SMABORT_TAG 0x0D
-#define SMINIT_RECOVERY 0x0F
-#define SMREL_RECOVERY 0x10
#define SMIDENT 0x80
#define DISC_PRIV 0x40
-#define SMSYNC 0x01
-#define SMWDTR 0x03
#define SM8BIT 0x00
#define SM16BIT 0x01
-#define SMIGNORWR 0x23 /* Ignore Wide Residue */
#define SIX_BYTE_CMD 0x06
#define TWELVE_BYTE_CMD 0x0C
@@ -1660,7 +1632,7 @@ static int FlashPoint_AbortCCB(void *pCurrCard, struct sccb *p_Sccb)
p_Sccb->Sccb_scsistat =
ABORT_ST;
p_Sccb->Sccb_scsimsg =
- SMABORT_TAG;
+ ABORT_TASK;
if (((struct sccb_card *)
pCurrCard)->currentSCCB ==
@@ -1812,7 +1784,7 @@ static int FlashPoint_HandleInterrupt(void *pcard)
FPT_phaseChkFifo(ioport, thisCard);
if (RD_HARPOON(ioport + hp_gp_reg_1) ==
- SMSAVE_DATA_PTR) {
+ SAVE_POINTERS) {
WR_HARPOON(ioport + hp_gp_reg_1, 0x00);
currSCCB->Sccb_XferState |= F_NO_DATA_YET;
@@ -1865,7 +1837,7 @@ static int FlashPoint_HandleInterrupt(void *pcard)
FPT_phaseChkFifo(ioport, thisCard);
if (RD_HARPOON(ioport + hp_gp_reg_1) ==
- SMSAVE_DATA_PTR) {
+ SAVE_POINTERS) {
WR_HARPOON(ioport + hp_gp_reg_1, 0x00);
currSCCB->Sccb_XferState |=
F_NO_DATA_YET;
@@ -2258,7 +2230,7 @@ static unsigned char FPT_sfm(u32 port, struct sccb *pCurrSCCB)
WR_HARPOON(port + hp_fiforead, 0);
WR_HARPOON(port + hp_fifowrite, 0);
if (pCurrSCCB != NULL) {
- pCurrSCCB->Sccb_scsimsg = SMPARITY;
+ pCurrSCCB->Sccb_scsimsg = MSG_PARITY_ERROR;
}
message = 0x00;
do {
@@ -2411,7 +2383,7 @@ static void FPT_ssel(u32 port, unsigned char p_card)
WRW_HARPOON((port + ID_MSG_STRT + 2), BRH_OP + ALWAYS + NP);
- currSCCB->Sccb_scsimsg = SMDEV_RESET;
+ currSCCB->Sccb_scsimsg = TARGET_RESET;
WR_HARPOON(port + hp_autostart_3, (SELECT + SELCHK_STRT));
auto_loaded = 1;
@@ -2758,9 +2730,9 @@ static void FPT_sres(u32 port, unsigned char p_card,
if (message == 0) {
msgRetryCount++;
if (msgRetryCount == 1) {
- FPT_SendMsg(port, SMPARITY);
+ FPT_SendMsg(port, MSG_PARITY_ERROR);
} else {
- FPT_SendMsg(port, SMDEV_RESET);
+ FPT_SendMsg(port, TARGET_RESET);
FPT_sssyncv(port, our_target, NARROW_SCSI,
currTar_Info);
@@ -2860,8 +2832,8 @@ static void FPT_SendMsg(u32 port, unsigned char message)
WR_HARPOON(port + hp_portctrl_0, 0x00);
- if ((message == SMABORT) || (message == SMDEV_RESET) ||
- (message == SMABORT_TAG)) {
+ if ((message == ABORT_TASK_SET) || (message == TARGET_RESET) ||
+ (message == ABORT_TASK)) {
while (!
(RDW_HARPOON((port + hp_intstat)) &
(BUS_FREE | PHASE))) {
@@ -2893,7 +2865,7 @@ static void FPT_sdecm(unsigned char message, u32 port, unsigned char p_card)
currTar_Info = &FPT_sccbMgrTbl[p_card][currSCCB->TargID];
- if (message == SMREST_DATA_PTR) {
+ if (message == RESTORE_POINTERS) {
if (!(currSCCB->Sccb_XferState & F_NO_DATA_YET)) {
currSCCB->Sccb_ATC = currSCCB->Sccb_savedATC;
@@ -2905,7 +2877,7 @@ static void FPT_sdecm(unsigned char message, u32 port, unsigned char p_card)
(AUTO_IMMED + DISCONNECT_START));
}
- else if (message == SMCMD_COMP) {
+ else if (message == COMMAND_COMPLETE) {
if (currSCCB->Sccb_scsistat == SELECT_Q_ST) {
currTar_Info->TarStatus &=
@@ -2917,15 +2889,16 @@ static void FPT_sdecm(unsigned char message, u32 port, unsigned char p_card)
}
- else if ((message == SMNO_OP) || (message >= SMIDENT)
- || (message == SMINIT_RECOVERY) || (message == SMREL_RECOVERY)) {
+ else if ((message == NOP) || (message >= IDENTIFY_BASE) ||
+ (message == INITIATE_RECOVERY) ||
+ (message == RELEASE_RECOVERY)) {
ACCEPT_MSG(port);
WR_HARPOON(port + hp_autostart_1,
(AUTO_IMMED + DISCONNECT_START));
}
- else if (message == SMREJECT) {
+ else if (message == MESSAGE_REJECT) {
if ((currSCCB->Sccb_scsistat == SELECT_SN_ST) ||
(currSCCB->Sccb_scsistat == SELECT_WN_ST) ||
@@ -3026,19 +2999,19 @@ static void FPT_sdecm(unsigned char message, u32 port, unsigned char p_card)
}
}
- else if (message == SMEXT) {
+ else if (message == EXTENDED_MESSAGE) {
ACCEPT_MSG(port);
FPT_shandem(port, p_card, currSCCB);
}
- else if (message == SMIGNORWR) {
+ else if (message == IGNORE_WIDE_RESIDUE) {
ACCEPT_MSG(port); /* ACK the RESIDUE MSG */
message = FPT_sfm(port, currSCCB);
- if (currSCCB->Sccb_scsimsg != SMPARITY)
+ if (currSCCB->Sccb_scsimsg != MSG_PARITY_ERROR)
ACCEPT_MSG(port);
WR_HARPOON(port + hp_autostart_1,
(AUTO_IMMED + DISCONNECT_START));
@@ -3047,7 +3020,7 @@ static void FPT_sdecm(unsigned char message, u32 port, unsigned char p_card)
else {
currSCCB->HostStatus = SCCB_PHASE_SEQUENCE_FAIL;
- currSCCB->Sccb_scsimsg = SMREJECT;
+ currSCCB->Sccb_scsimsg = MESSAGE_REJECT;
ACCEPT_MSG_ATN(port);
WR_HARPOON(port + hp_autostart_1,
@@ -3073,7 +3046,7 @@ static void FPT_shandem(u32 port, unsigned char p_card, struct sccb *pCurrSCCB)
message = FPT_sfm(port, pCurrSCCB);
if (message) {
- if (message == SMSYNC) {
+ if (message == EXTENDED_SDTR) {
if (length == 0x03) {
@@ -3081,10 +3054,10 @@ static void FPT_shandem(u32 port, unsigned char p_card, struct sccb *pCurrSCCB)
FPT_stsyncn(port, p_card);
} else {
- pCurrSCCB->Sccb_scsimsg = SMREJECT;
+ pCurrSCCB->Sccb_scsimsg = MESSAGE_REJECT;
ACCEPT_MSG_ATN(port);
}
- } else if (message == SMWDTR) {
+ } else if (message == EXTENDED_WDTR) {
if (length == 0x02) {
@@ -3092,7 +3065,7 @@ static void FPT_shandem(u32 port, unsigned char p_card, struct sccb *pCurrSCCB)
FPT_stwidn(port, p_card);
} else {
- pCurrSCCB->Sccb_scsimsg = SMREJECT;
+ pCurrSCCB->Sccb_scsimsg = MESSAGE_REJECT;
ACCEPT_MSG_ATN(port);
WR_HARPOON(port + hp_autostart_1,
@@ -3101,20 +3074,20 @@ static void FPT_shandem(u32 port, unsigned char p_card, struct sccb *pCurrSCCB)
}
} else {
- pCurrSCCB->Sccb_scsimsg = SMREJECT;
+ pCurrSCCB->Sccb_scsimsg = MESSAGE_REJECT;
ACCEPT_MSG_ATN(port);
WR_HARPOON(port + hp_autostart_1,
(AUTO_IMMED + DISCONNECT_START));
}
} else {
- if (pCurrSCCB->Sccb_scsimsg != SMPARITY)
+ if (pCurrSCCB->Sccb_scsimsg != MSG_PARITY_ERROR)
ACCEPT_MSG(port);
WR_HARPOON(port + hp_autostart_1,
(AUTO_IMMED + DISCONNECT_START));
}
} else {
- if (pCurrSCCB->Sccb_scsimsg == SMPARITY)
+ if (pCurrSCCB->Sccb_scsimsg == MSG_PARITY_ERROR)
WR_HARPOON(port + hp_autostart_1,
(AUTO_IMMED + DISCONNECT_START));
}
@@ -3148,10 +3121,10 @@ static unsigned char FPT_sisyncn(u32 port, unsigned char p_card,
WRW_HARPOON((port + ID_MSG_STRT + 2), BRH_OP + ALWAYS + CMDPZ);
WRW_HARPOON((port + SYNC_MSGS + 0),
- (MPM_OP + AMSG_OUT + SMEXT));
+ (MPM_OP + AMSG_OUT + EXTENDED_MESSAGE));
WRW_HARPOON((port + SYNC_MSGS + 2), (MPM_OP + AMSG_OUT + 0x03));
WRW_HARPOON((port + SYNC_MSGS + 4),
- (MPM_OP + AMSG_OUT + SMSYNC));
+ (MPM_OP + AMSG_OUT + EXTENDED_SDTR));
if ((currTar_Info->TarEEValue & EE_SYNC_MASK) == EE_SYNC_20MB)
@@ -3221,7 +3194,7 @@ static void FPT_stsyncn(u32 port, unsigned char p_card)
sync_msg = FPT_sfm(port, currSCCB);
- if ((sync_msg == 0x00) && (currSCCB->Sccb_scsimsg == SMPARITY)) {
+ if ((sync_msg == 0x00) && (currSCCB->Sccb_scsimsg == MSG_PARITY_ERROR)) {
WR_HARPOON(port + hp_autostart_1,
(AUTO_IMMED + DISCONNECT_START));
return;
@@ -3231,7 +3204,7 @@ static void FPT_stsyncn(u32 port, unsigned char p_card)
offset = FPT_sfm(port, currSCCB);
- if ((offset == 0x00) && (currSCCB->Sccb_scsimsg == SMPARITY)) {
+ if ((offset == 0x00) && (currSCCB->Sccb_scsimsg == MSG_PARITY_ERROR)) {
WR_HARPOON(port + hp_autostart_1,
(AUTO_IMMED + DISCONNECT_START));
return;
@@ -3343,9 +3316,11 @@ static void FPT_sisyncr(u32 port, unsigned char sync_pulse,
unsigned char offset)
{
ARAM_ACCESS(port);
- WRW_HARPOON((port + SYNC_MSGS + 0), (MPM_OP + AMSG_OUT + SMEXT));
+ WRW_HARPOON((port + SYNC_MSGS + 0),
+ (MPM_OP + AMSG_OUT + EXTENDED_MESSAGE));
WRW_HARPOON((port + SYNC_MSGS + 2), (MPM_OP + AMSG_OUT + 0x03));
- WRW_HARPOON((port + SYNC_MSGS + 4), (MPM_OP + AMSG_OUT + SMSYNC));
+ WRW_HARPOON((port + SYNC_MSGS + 4),
+ (MPM_OP + AMSG_OUT + EXTENDED_SDTR));
WRW_HARPOON((port + SYNC_MSGS + 6), (MPM_OP + AMSG_OUT + sync_pulse));
WRW_HARPOON((port + SYNC_MSGS + 8), (RAT_OP));
WRW_HARPOON((port + SYNC_MSGS + 10), (MPM_OP + AMSG_OUT + offset));
@@ -3388,10 +3363,10 @@ static unsigned char FPT_siwidn(u32 port, unsigned char p_card)
WRW_HARPOON((port + ID_MSG_STRT + 2), BRH_OP + ALWAYS + CMDPZ);
WRW_HARPOON((port + SYNC_MSGS + 0),
- (MPM_OP + AMSG_OUT + SMEXT));
+ (MPM_OP + AMSG_OUT + EXTENDED_MESSAGE));
WRW_HARPOON((port + SYNC_MSGS + 2), (MPM_OP + AMSG_OUT + 0x02));
WRW_HARPOON((port + SYNC_MSGS + 4),
- (MPM_OP + AMSG_OUT + SMWDTR));
+ (MPM_OP + AMSG_OUT + EXTENDED_WDTR));
WRW_HARPOON((port + SYNC_MSGS + 6), (RAT_OP));
WRW_HARPOON((port + SYNC_MSGS + 8),
(MPM_OP + AMSG_OUT + SM16BIT));
@@ -3436,7 +3411,7 @@ static void FPT_stwidn(u32 port, unsigned char p_card)
width = FPT_sfm(port, currSCCB);
- if ((width == 0x00) && (currSCCB->Sccb_scsimsg == SMPARITY)) {
+ if ((width == 0x00) && (currSCCB->Sccb_scsimsg == MSG_PARITY_ERROR)) {
WR_HARPOON(port + hp_autostart_1,
(AUTO_IMMED + DISCONNECT_START));
return;
@@ -3499,9 +3474,11 @@ static void FPT_stwidn(u32 port, unsigned char p_card)
static void FPT_siwidr(u32 port, unsigned char width)
{
ARAM_ACCESS(port);
- WRW_HARPOON((port + SYNC_MSGS + 0), (MPM_OP + AMSG_OUT + SMEXT));
+ WRW_HARPOON((port + SYNC_MSGS + 0),
+ (MPM_OP + AMSG_OUT + EXTENDED_MESSAGE));
WRW_HARPOON((port + SYNC_MSGS + 2), (MPM_OP + AMSG_OUT + 0x02));
- WRW_HARPOON((port + SYNC_MSGS + 4), (MPM_OP + AMSG_OUT + SMWDTR));
+ WRW_HARPOON((port + SYNC_MSGS + 4),
+ (MPM_OP + AMSG_OUT + EXTENDED_WDTR));
WRW_HARPOON((port + SYNC_MSGS + 6), (RAT_OP));
WRW_HARPOON((port + SYNC_MSGS + 8), (MPM_OP + AMSG_OUT + width));
WRW_HARPOON((port + SYNC_MSGS + 10), (BRH_OP + ALWAYS + NP));
@@ -3682,7 +3659,7 @@ static void FPT_ssenss(struct sccb_card *pCurrCard)
}
currSCCB->CdbLength = SIX_BYTE_CMD;
- currSCCB->Cdb[0] = SCSI_REQUEST_SENSE;
+ currSCCB->Cdb[0] = REQUEST_SENSE;
currSCCB->Cdb[1] = currSCCB->Cdb[1] & (unsigned char)0xE0; /*Keep LUN. */
currSCCB->Cdb[2] = 0x00;
currSCCB->Cdb[3] = 0x00;
@@ -3939,13 +3916,9 @@ static void FPT_sinits(struct sccb *p_sccb, unsigned char p_card)
*/
if ((currTar_Info->TarStatus & TAR_ALLOW_DISC) ||
(currTar_Info->TarStatus & TAG_Q_TRYING)) {
- p_sccb->Sccb_idmsg =
- (unsigned char)(SMIDENT | DISC_PRIV) | p_sccb->Lun;
- }
-
- else {
-
- p_sccb->Sccb_idmsg = (unsigned char)SMIDENT | p_sccb->Lun;
+ p_sccb->Sccb_idmsg = IDENTIFY(true, p_sccb->Lun);
+ } else {
+ p_sccb->Sccb_idmsg = IDENTIFY(false, p_sccb->Lun);
}
p_sccb->HostStatus = 0x00;
@@ -3962,7 +3935,7 @@ static void FPT_sinits(struct sccb *p_sccb, unsigned char p_card)
*/
p_sccb->Sccb_scsistat = BUS_FREE_ST;
p_sccb->SccbStatus = SCCB_IN_PROCESS;
- p_sccb->Sccb_scsimsg = SMNO_OP;
+ p_sccb->Sccb_scsimsg = NOP;
}
@@ -4167,7 +4140,7 @@ static void FPT_phaseMsgOut(u32 port, unsigned char p_card)
message = currSCCB->Sccb_scsimsg;
scsiID = currSCCB->TargID;
- if (message == SMDEV_RESET) {
+ if (message == TARGET_RESET) {
currTar_Info = &FPT_sccbMgrTbl[p_card][scsiID];
currTar_Info->TarSyncCtrl = 0;
@@ -4203,7 +4176,7 @@ static void FPT_phaseMsgOut(u32 port, unsigned char p_card)
else if (currSCCB->Sccb_scsistat < COMMAND_ST) {
- if (message == SMNO_OP) {
+ if (message == NOP) {
currSCCB->Sccb_MGRFlags |= F_DEV_SELECTED;
FPT_ssel(port, p_card);
@@ -4211,13 +4184,13 @@ static void FPT_phaseMsgOut(u32 port, unsigned char p_card)
}
} else {
- if (message == SMABORT)
+ if (message == ABORT_TASK_SET)
FPT_queueFlushSccb(p_card, SCCB_COMPLETE);
}
} else {
- message = SMABORT;
+ message = ABORT_TASK_SET;
}
WRW_HARPOON((port + hp_intstat), (BUS_FREE | PHASE | XFER_CNT_0));
@@ -4232,8 +4205,8 @@ static void FPT_phaseMsgOut(u32 port, unsigned char p_card)
WR_HARPOON(port + hp_portctrl_0, 0x00);
- if ((message == SMABORT) || (message == SMDEV_RESET) ||
- (message == SMABORT_TAG)) {
+ if ((message == ABORT_TASK_SET) || (message == TARGET_RESET) ||
+ (message == ABORT_TASK)) {
while (!(RDW_HARPOON((port + hp_intstat)) & (BUS_FREE | PHASE))) {
}
@@ -4275,8 +4248,8 @@ static void FPT_phaseMsgOut(u32 port, unsigned char p_card)
else {
- if (message == SMPARITY) {
- currSCCB->Sccb_scsimsg = SMNO_OP;
+ if (message == MSG_PARITY_ERROR) {
+ currSCCB->Sccb_scsimsg = NOP;
WR_HARPOON(port + hp_autostart_1,
(AUTO_IMMED + DISCONNECT_START));
} else {
@@ -4306,7 +4279,7 @@ static void FPT_phaseMsgIn(u32 port, unsigned char p_card)
}
message = RD_HARPOON(port + hp_scsidata_0);
- if ((message == SMDISC) || (message == SMSAVE_DATA_PTR)) {
+ if ((message == DISCONNECT) || (message == SAVE_POINTERS)) {
WR_HARPOON(port + hp_autostart_1,
(AUTO_IMMED + END_DATA_START));
@@ -4321,7 +4294,7 @@ static void FPT_phaseMsgIn(u32 port, unsigned char p_card)
FPT_sdecm(message, port, p_card);
} else {
- if (currSCCB->Sccb_scsimsg != SMPARITY)
+ if (currSCCB->Sccb_scsimsg != MSG_PARITY_ERROR)
ACCEPT_MSG(port);
WR_HARPOON(port + hp_autostart_1,
(AUTO_IMMED + DISCONNECT_START));
@@ -4351,7 +4324,7 @@ static void FPT_phaseIllegal(u32 port, unsigned char p_card)
currSCCB->HostStatus = SCCB_PHASE_SEQUENCE_FAIL;
currSCCB->Sccb_scsistat = ABORT_ST;
- currSCCB->Sccb_scsimsg = SMABORT;
+ currSCCB->Sccb_scsimsg = ABORT_TASK_SET;
}
ACCEPT_MSG_ATN(port);
@@ -4650,9 +4623,9 @@ static void FPT_autoCmdCmplt(u32 p_port, unsigned char p_card)
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUN_CA = 0;
- if (status_byte != SSGOOD) {
+ if (status_byte != SAM_STAT_GOOD) {
- if (status_byte == SSQ_FULL) {
+ if (status_byte == SAM_STAT_TASK_SET_FULL) {
if (((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
((FPT_sccbMgrTbl[p_card][currSCCB->TargID].
@@ -4784,7 +4757,7 @@ static void FPT_autoCmdCmplt(u32 p_port, unsigned char p_card)
}
- if (status_byte == SSCHECK) {
+ if (status_byte == SAM_STAT_CHECK_CONDITION) {
if (FPT_BL_Card[p_card].globalFlags & F_DO_RENEGO) {
if (FPT_sccbMgrTbl[p_card][currSCCB->TargID].
TarEEValue & EE_SYNC_MASK) {
@@ -4806,7 +4779,7 @@ static void FPT_autoCmdCmplt(u32 p_port, unsigned char p_card)
currSCCB->SccbStatus = SCCB_ERROR;
currSCCB->TargetStatus = status_byte;
- if (status_byte == SSCHECK) {
+ if (status_byte == SAM_STAT_CHECK_CONDITION) {
FPT_sccbMgrTbl[p_card][currSCCB->TargID].
TarLUN_CA = 1;
@@ -6868,14 +6841,14 @@ static void FPT_queueCmdComplete(struct sccb_card *pCurrCard,
if ((p_sccb->
ControlByte & (SCCB_DATA_XFER_OUT | SCCB_DATA_XFER_IN))
&& (p_sccb->HostStatus == SCCB_COMPLETE)
- && (p_sccb->TargetStatus != SSCHECK))
-
- if ((SCSIcmd == SCSI_READ) ||
- (SCSIcmd == SCSI_WRITE) ||
- (SCSIcmd == SCSI_READ_EXTENDED) ||
- (SCSIcmd == SCSI_WRITE_EXTENDED) ||
- (SCSIcmd == SCSI_WRITE_AND_VERIFY) ||
- (SCSIcmd == SCSI_START_STOP_UNIT) ||
+ && (p_sccb->TargetStatus != SAM_STAT_CHECK_CONDITION))
+
+ if ((SCSIcmd == READ_6) ||
+ (SCSIcmd == WRITE_6) ||
+ (SCSIcmd == READ_10) ||
+ (SCSIcmd == WRITE_10) ||
+ (SCSIcmd == WRITE_VERIFY) ||
+ (SCSIcmd == START_STOP) ||
(pCurrCard->globalFlags & F_NO_FILTER)
)
p_sccb->HostStatus = SCCB_DATA_UNDER_RUN;
--
2.29.2
next prev parent reply other threads:[~2021-04-23 11:40 UTC|newest]
Thread overview: 93+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-23 11:39 [RFC PATCHv2 00/39] SCSI result cleanup, part 2 Hannes Reinecke
2021-04-23 11:39 ` [PATCH 01/39] st: return error code in st_scsi_execute() Hannes Reinecke
2021-04-26 3:19 ` Bart Van Assche
2021-04-26 14:51 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 02/39] scsi_ioctl: return error code when blk_rq_map_kern() fails Hannes Reinecke
2021-04-26 3:20 ` Bart Van Assche
2021-04-26 14:51 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 03/39] scsi_dh_alua: do not interpret DRIVER_ERROR Hannes Reinecke
2021-04-26 14:54 ` Christoph Hellwig
2021-04-26 15:17 ` Hannes Reinecke
2021-04-23 11:39 ` [PATCH 04/39] scsi: Fixup calling convention for scsi_mode_sense() Hannes Reinecke
2021-04-26 3:21 ` Bart Van Assche
2021-04-26 14:57 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 05/39] scsi: stop using DRIVER_ERROR Hannes Reinecke
2021-04-26 3:26 ` Bart Van Assche
2021-04-26 15:01 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 06/39] scsi: introduce scsi_build_sense() Hannes Reinecke
2021-04-26 3:31 ` Bart Van Assche
2021-04-26 15:02 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 07/39] scsi: introduce scsi_status_is_check_condition() Hannes Reinecke
2021-04-26 3:34 ` Bart Van Assche
2021-04-26 6:58 ` Hannes Reinecke
2021-04-26 15:02 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 08/39] scsi: Kill DRIVER_SENSE Hannes Reinecke
2021-04-26 3:41 ` Bart Van Assche
2021-04-26 7:02 ` Hannes Reinecke
2021-04-26 15:20 ` Christoph Hellwig
2021-04-27 7:15 ` Hannes Reinecke
2021-04-23 11:39 ` [PATCH 09/39] scsi: do not use DRIVER_INVALID Hannes Reinecke
2021-04-26 3:42 ` Bart Van Assche
2021-04-26 15:20 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 10/39] scsi_error: use DID_TIME_OUT instead of DRIVER_TIMEOUT Hannes Reinecke
2021-04-26 3:42 ` Bart Van Assche
2021-04-26 15:21 ` Christoph Hellwig
2021-04-26 15:38 ` Hannes Reinecke
2021-04-23 11:39 ` [PATCH 11/39] xen-scsiback: use DID_ERROR instead of DRIVER_ERROR Hannes Reinecke
2021-04-26 3:43 ` Bart Van Assche
2021-04-26 15:22 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 12/39] xen-scsifront: compability status handling Hannes Reinecke
2021-04-26 3:44 ` Bart Van Assche
2021-04-26 7:03 ` Hannes Reinecke
2021-04-23 11:39 ` [PATCH 13/39] scsi: Drop the now obsolete driver_byte definitions Hannes Reinecke
2021-04-26 3:46 ` Bart Van Assche
2021-04-26 15:22 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 14/39] NCR5380: Fold SCSI message ABORT onto DID_ABORT Hannes Reinecke
2021-04-26 15:23 ` Christoph Hellwig
2021-04-26 15:43 ` Hannes Reinecke
2021-04-23 11:39 ` [PATCH 15/39] scsi: add get_{status,host}_byte() accessor function Hannes Reinecke
2021-04-26 3:47 ` Bart Van Assche
2021-04-26 7:05 ` Hannes Reinecke
2021-04-26 15:23 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 16/39] scsi: add translate_msg_byte() Hannes Reinecke
2021-04-26 3:48 ` Bart Van Assche
2021-04-26 15:24 ` Christoph Hellwig
2021-04-26 15:43 ` Hannes Reinecke
2021-04-23 11:39 ` [PATCH 17/39] dc395: use standard macros to set SCSI result Hannes Reinecke
2021-04-26 15:25 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 18/39] dc395: translate message bytes Hannes Reinecke
2021-04-26 15:25 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 19/39] qlogicfas408: make ql_pcmd() a void function Hannes Reinecke
2021-04-26 15:26 ` Christoph Hellwig
2021-04-26 15:45 ` Hannes Reinecke
2021-04-27 7:36 ` Hannes Reinecke
2021-04-23 11:39 ` [PATCH 20/39] qlogicfas408: whitespace cleanup Hannes Reinecke
2021-04-23 11:39 ` [PATCH 21/39] qlogicfas408: translate message to host byte status Hannes Reinecke
2021-04-23 11:39 ` [PATCH 22/39] nsp32: whitespace cleanup Hannes Reinecke
2021-04-23 11:39 ` [PATCH 23/39] nsp32: do not set message byte Hannes Reinecke
2021-04-23 11:39 ` [PATCH 24/39] wd33c93: translate message byte to host byte Hannes Reinecke
2021-04-24 9:20 ` Finn Thain
2021-04-26 9:07 ` Hannes Reinecke
2021-04-27 4:39 ` Finn Thain
2021-04-27 6:11 ` Hannes Reinecke
2021-04-23 11:39 ` [PATCH 25/39] mesh: translate message to host byte status Hannes Reinecke
2021-04-23 11:39 ` [PATCH 26/39] acornscsi: remove acornscsi_reportstatus() Hannes Reinecke
2021-04-26 15:32 ` Christoph Hellwig
2021-04-23 11:39 ` [PATCH 27/39] acornscsi: translate message byte to host byte Hannes Reinecke
2021-04-23 11:39 ` [PATCH 28/39] aha152x: modify done() to use separate status bytes Hannes Reinecke
2021-04-23 11:39 ` [PATCH 29/39] aha152x: do not set message byte when calling scsi_done() Hannes Reinecke
2021-04-23 11:39 ` [PATCH 30/39] advansys: do not set message byte in SCSI status Hannes Reinecke
2021-04-23 11:39 ` [PATCH 31/39] fas216: translate message to host byte status Hannes Reinecke
2021-04-23 11:39 ` [PATCH 32/39] fas216: Use get_status_byte() to avoid using linux-specific status codes Hannes Reinecke
2021-04-23 11:39 ` Hannes Reinecke [this message]
2021-04-23 11:39 ` [PATCH 34/39] fdomain: drop last argument to fdomain_finish_cmd() Hannes Reinecke
2021-04-23 11:39 ` [PATCH 35/39] fdomain: translate message to host byte status Hannes Reinecke
2021-04-24 9:21 ` Finn Thain
2021-04-23 11:39 ` [PATCH 36/39] scsi: drop message byte helper Hannes Reinecke
2021-04-26 3:48 ` Bart Van Assche
2021-04-23 11:39 ` [PATCH 37/39] scsi: kill message byte Hannes Reinecke
2021-04-26 3:50 ` Bart Van Assche
2021-04-23 11:39 ` [PATCH 38/39] target: use standard SAM status types Hannes Reinecke
2021-04-26 3:51 ` Bart Van Assche
2021-04-23 11:39 ` [PATCH 39/39] scsi: drop obsolete linux-specific SCSI status codes Hannes Reinecke
2021-04-26 3:55 ` Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210423113944.42672-34-hare@suse.de \
--to=hare@suse.de \
--cc=bvanassche@acm.org \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.