From: Eddie James <eajames@linux.ibm.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH 4/4] ARM: dts: aspeed: Everest: Add directly controlled LEDs
Date: Fri, 30 Apr 2021 14:00:00 -0500 [thread overview]
Message-ID: <20210430190000.31646-5-eajames@linux.ibm.com> (raw)
In-Reply-To: <20210430190000.31646-1-eajames@linux.ibm.com>
From: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
These LEDs are directly connected to the BMC's GPIO bank
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
---
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 33 ++++++++++++++++++--
1 file changed, 31 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 27af28c8847d..2ddd10e93a80 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -202,6 +202,35 @@ fan3-presence {
linux,code = <12>;
};
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* RTC battery fault LED at the back */
+ led-rtc-battery {
+ gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ /* BMC Card fault LED at the back */
+ led-bmc {
+ gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ /* Enclosure Identify LED at the back */
+ led-rear-enc-id0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ /* Enclosure fault LED at the back */
+ led-rear-enc-fault0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ /* PCIE slot power LED */
+ led-pcieslot-power {
+ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+ };
+ };
};
&gpio0 {
@@ -214,7 +243,7 @@ &gpio0 {
/*F0-F7*/ "PIN_HOLE_RESET_IN_N","","",
"PIN_HOLE_RESET_OUT_N","","","","",
/*G0-G7*/ "","","","","","","","",
- /*H0-H7*/ "","","","","","","","",
+ /*H0-H7*/ "led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
/*I0-I7*/ "","","","","","","","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
@@ -222,7 +251,7 @@ &gpio0 {
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "","","","","","","","",
- /*P0-P7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","led-pcieslot-power","","","",
/*Q0-Q7*/ "","","","","","","","",
/*R0-R7*/ "","","","","","I2C_FLASH_MICRO_N","","",
/*S0-S7*/ "","","","","","","","",
--
2.27.0
prev parent reply other threads:[~2021-04-30 19:00 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-30 18:59 [PATCH 0/4] ARM: dts: aspeed: Rainier and Everest updates Eddie James
2021-04-30 18:59 ` [PATCH 1/4] ARM: dts: aspeed: Rainier 1S4U: Fix fan channels Eddie James
2021-04-30 18:59 ` [PATCH 2/4] ARM: dts: aspeed: Everest: Fix cable card PCA chips Eddie James
2021-04-30 18:59 ` [PATCH 3/4] ARM: dts: aspeed: Rainier 4U: Remove fan updates Eddie James
2021-04-30 19:00 ` Eddie James [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210430190000.31646-5-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.