Re: [RFC PATCH 1/4] dt-bindings: iio: accel: fxls8962af: add interrupt options

[Rob Herring <robh@kernel.org>]

On Wed, Apr 28, 2021 at 10:22:00AM +0200, Sean Nyekjaer wrote:
> This in done for supporting hw buffered sampling
> 
> Signed-off-by: Sean Nyekjaer <sean@geanix.com>
> ---
> This series depends on "iio: accel: add support for
> FXLS8962AF/FXLS8964AF accelerometers"
> 
>  .../bindings/iio/accel/nxp,fxls8962af.yaml           | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
> index c7be7a1679ab..e0e5542377df 100644
> --- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
> @@ -32,6 +32,16 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> +  interrupt-names:
> +    maxItems: 1
> +    items:
> +      enum:
> +        - INT1
> +        - INT2

You can simplify this to:

interrupt-names:
  enum:
    - INT1
    - INT2


> +
> +  drive-open-drain:
> +    type: boolean
> +
>  required:
>    - compatible
>    - reg
> @@ -51,6 +61,7 @@ examples:
>              reg = <0x62>;
>              interrupt-parent = <&gpio0>;
>              interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "INT1";
>          };
>      };
>    - |
> @@ -66,5 +77,6 @@ examples:
>              spi-max-frequency = <4000000>;
>              interrupt-parent = <&gpio0>;
>              interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "INT1";
>          };
>      };
> -- 
> 2.31.0
>