All of lore.kernel.org
 help / color / mirror / Atom feed
From: Connor Abbott <cwabbott0@gmail.com>
To: linux-bluetooth@vger.kernel.org
Cc: Connor Abbott <cwabbott0@gmail.com>,
	Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>,
	stable@vger.kernel.org
Subject: [PATCH] Bluetooth: btqca: Don't modify firmware contents in-place
Date: Fri,  7 May 2021 14:27:33 +0200	[thread overview]
Message-ID: <20210507122733.11250-1-cwabbott0@gmail.com> (raw)

struct firmware::data is marked const, and when the firmware is
compressed with xz (default at least with Fedora) it's mapped read-only
which results in a crash:

BUG: unable to handle page fault for address: ffffae57c0ca5047
PGD 100000067 P4D 100000067 PUD 1001ce067 PMD 10165a067 PTE 8000000112bba161
Oops: 0003 [#1] SMP NOPTI
CPU: 3 PID: 204 Comm: kworker/u17:0 Not tainted 5.12.1-test+ #1
Hardware name: Dell Inc. XPS 13 9310/0F7M4C, BIOS 1.2.5 12/10/2020
Workqueue: hci0 hci_power_on [bluetooth]
RIP: 0010:qca_download_firmware+0x27c/0x4e0 [btqca]
Code: 1b 75 04 80 48 0c 01 0f b7 c6 8d 54 02 0c 41 39 d7 0f 8e 62 fe ff ff 48 63 c2 4c 01 e8 0f b7 38 0f b7 70 02 66 83 ff 11 75 d3 <80> 48 0c 80 41 83 fc 03 7e 6e 88 58 0d eb ce 41 0f b6 45 0e 48 8b
RSP: 0018:ffffae57c08dfc68 EFLAGS: 00010246
RAX: ffffae57c0ca503b RBX: 000000000000000e RCX: 0000000000000000
RDX: 0000000000000037 RSI: 0000000000000006 RDI: 0000000000000011
RBP: ffff978d9949e000 R08: ffff978d84ed7540 R09: ffffae57c0ca5000
R10: 000000000010cd00 R11: 0000000000000001 R12: 0000000000000005
R13: ffffae57c0ca5004 R14: ffff978d98ca8680 R15: 00000000000016a9
FS:  0000000000000000(0000) GS:ffff9794ef6c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffae57c0ca5047 CR3: 0000000113d5a004 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
 qca_uart_setup+0x2cb/0x1390 [btqca]
 ? qca_read_soc_version+0x136/0x220 [btqca]
 qca_setup+0x288/0xab0 [hci_uart]
 hci_dev_do_open+0x1f3/0x780 [bluetooth]
 ? try_to_wake_up+0x1c1/0x4f0
 hci_power_on+0x3f/0x200 [bluetooth]
 process_one_work+0x1ec/0x380
 worker_thread+0x53/0x3e0
 ? process_one_work+0x380/0x380
 kthread+0x11b/0x140
 ? kthread_associate_blkcg+0xa0/0xa0
 ret_from_fork+0x1f/0x30
Modules linked in: llc ip_set nf_tables nfnetlink snd_soc_skl_hda_dsp(+) ip6table_filter snd_soc_hdac_hdmi ip6_tables qrtr_mhi iptable_filter snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic s>
 dell_wmi_sysman(+) dell_smbios snd dcdbas mhi vfat videobuf2_vmalloc i2c_i801 videobuf2_memops videobuf2_v4l2 dell_wmi_descriptor fat wmi_bmof soundcore i2c_smbus videobuf2_common libarc4 mei_me mei hid_se>
 i2c_hid_acpi i2c_hid video pinctrl_tigerlake fuse
CR2: ffffae57c0ca5047

This also seems to fix a failure to suspend due to the firmware
download on bootup getting interrupted by the crash:

Bluetooth: hci0: SSR or FW download time out
PM: dpm_run_callback(): acpi_subsys_suspend+0x0/0x60 returns -110
PM: Device serial0-0 failed to suspend: error -110
PM: Some devices failed to suspend, or early wake event detected

Fixes: 83e8196 ("Bluetooth: btqca: Introduce generic QCA ROME support")
Cc: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
---
 drivers/bluetooth/btqca.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 25114f0d1319..bd71dfc9c974 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -183,7 +183,7 @@ int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
 EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
 
 static void qca_tlv_check_data(struct qca_fw_config *config,
-		const struct firmware *fw, enum qca_btsoc_type soc_type)
+		u8 *fw_data, enum qca_btsoc_type soc_type)
 {
 	const u8 *data;
 	u32 type_len;
@@ -194,7 +194,7 @@ static void qca_tlv_check_data(struct qca_fw_config *config,
 	struct tlv_type_nvm *tlv_nvm;
 	uint8_t nvm_baud_rate = config->user_baud_rate;
 
-	tlv = (struct tlv_type_hdr *)fw->data;
+	tlv = (struct tlv_type_hdr *)fw_data;
 
 	type_len = le32_to_cpu(tlv->type_len);
 	length = (type_len >> 8) & 0x00ffffff;
@@ -390,8 +390,9 @@ static int qca_download_firmware(struct hci_dev *hdev,
 				 enum qca_btsoc_type soc_type)
 {
 	const struct firmware *fw;
+	u8 *data;
 	const u8 *segment;
-	int ret, remain, i = 0;
+	int ret, size, remain, i = 0;
 
 	bt_dev_info(hdev, "QCA Downloading %s", config->fwname);
 
@@ -402,10 +403,22 @@ static int qca_download_firmware(struct hci_dev *hdev,
 		return ret;
 	}
 
-	qca_tlv_check_data(config, fw, soc_type);
+	size = fw->size;
+	data = vmalloc(fw->size);
+	if (!data) {
+		bt_dev_err(hdev, "QCA Failed to allocate memory for file: %s",
+			   config->fwname);
+		release_firmware(fw);
+		return -ENOMEM;
+	}
+
+	memcpy(data, fw->data, size);
+	release_firmware(fw);
+
+	qca_tlv_check_data(config, data, soc_type);
 
-	segment = fw->data;
-	remain = fw->size;
+	segment = data;
+	remain = size;
 	while (remain > 0) {
 		int segsize = min(MAX_SIZE_PER_TLV_SEGMENT, remain);
 
@@ -435,7 +448,7 @@ static int qca_download_firmware(struct hci_dev *hdev,
 		ret = qca_inject_cmd_complete_event(hdev);
 
 out:
-	release_firmware(fw);
+	vfree(data);
 
 	return ret;
 }
-- 
2.31.1


             reply	other threads:[~2021-05-07 12:28 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-07 12:27 Connor Abbott [this message]
2021-05-07 12:51 ` [PATCH] Bluetooth: btqca: Don't modify firmware contents in-place Marcel Holtmann
2021-05-07 13:28 ` bluez.test.bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210507122733.11250-1-cwabbott0@gmail.com \
    --to=cwabbott0@gmail.com \
    --cc=gubbaven@codeaurora.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.