All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ansuel Smith <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Ansuel Smith <ansuelsmth@gmail.com>
Subject: [PATCH net-next v6 09/25] net: dsa: qca8k: add support for qca8327 switch
Date: Fri, 14 May 2021 22:59:59 +0200	[thread overview]
Message-ID: <20210514210015.18142-10-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20210514210015.18142-1-ansuelsmth@gmail.com>

qca8327 switch is a low tier version of the more recent qca8337.
It does share the same regs used by the qca8k driver and can be
supported with minimal change.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/qca8k.c | 23 ++++++++++++++++++++---
 drivers/net/dsa/qca8k.h |  6 ++++++
 2 files changed, 26 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index d4e3f81576ec..693bd9fd532b 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1524,6 +1524,7 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
 static int
 qca8k_sw_probe(struct mdio_device *mdiodev)
 {
+	const struct qca8k_match_data *data;
 	struct qca8k_priv *priv;
 	u32 id;
 
@@ -1551,6 +1552,11 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
 		gpiod_set_value_cansleep(priv->reset_gpio, 0);
 	}
 
+	/* get the switches ID from the compatible */
+	data = of_device_get_match_data(&mdiodev->dev);
+	if (!data)
+		return -ENODEV;
+
 	/* read the switches ID register */
 	id = qca8k_read(priv, QCA8K_REG_MASK_CTRL);
 	if (id < 0)
@@ -1558,8 +1564,10 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
 
 	id >>= QCA8K_MASK_CTRL_ID_S;
 	id &= QCA8K_MASK_CTRL_ID_M;
-	if (id != QCA8K_ID_QCA8337)
+	if (id != data->id) {
+		dev_err(&mdiodev->dev, "Switch id detected %x but expected %x", id, data->id);
 		return -ENODEV;
+	}
 
 	priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
 	if (!priv->ds)
@@ -1624,9 +1632,18 @@ static int qca8k_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
 			 qca8k_suspend, qca8k_resume);
 
+static const struct qca8k_match_data qca832x = {
+	.id = QCA8K_ID_QCA8327,
+};
+
+static const struct qca8k_match_data qca833x = {
+	.id = QCA8K_ID_QCA8337,
+};
+
 static const struct of_device_id qca8k_of_match[] = {
-	{ .compatible = "qca,qca8334" },
-	{ .compatible = "qca,qca8337" },
+	{ .compatible = "qca,qca8327", .data = &qca832x },
+	{ .compatible = "qca,qca8334", .data = &qca833x },
+	{ .compatible = "qca,qca8337", .data = &qca833x },
 	{ /* sentinel */ },
 };
 
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index 86c585b7ec4a..87a8b10459c6 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -15,6 +15,8 @@
 #define QCA8K_NUM_PORTS					7
 #define QCA8K_MAX_MTU					9000
 
+#define PHY_ID_QCA8327					0x004dd034
+#define QCA8K_ID_QCA8327				0x12
 #define PHY_ID_QCA8337					0x004dd036
 #define QCA8K_ID_QCA8337				0x13
 
@@ -213,6 +215,10 @@ struct ar8xxx_port_status {
 	int enabled;
 };
 
+struct qca8k_match_data {
+	u8 id;
+};
+
 struct qca8k_priv {
 	struct regmap *regmap;
 	struct mii_bus *bus;
-- 
2.30.2


  parent reply	other threads:[~2021-05-14 21:00 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-14 20:59 [PATCH net-next v6 00/25] Multiple improvement to qca8k stability Ansuel Smith
2021-05-14 20:59 ` [PATCH net-next v6 01/25] net: dsa: qca8k: change simple print to dev variant Ansuel Smith
2021-05-14 22:43   ` Russell King (Oracle)
2021-05-14 20:59 ` [PATCH net-next v6 02/25] net: dsa: qca8k: use iopoll macro for qca8k_busy_wait Ansuel Smith
2021-05-14 22:52   ` Russell King (Oracle)
2021-05-14 23:07     ` Ansuel Smith
2021-05-14 20:59 ` [PATCH net-next v6 03/25] net: dsa: qca8k: improve qca8k read/write/rmw bus access Ansuel Smith
2021-05-14 22:53   ` Russell King (Oracle)
2021-05-14 20:59 ` [PATCH net-next v6 04/25] net: dsa: qca8k: handle qca8k_set_page errors Ansuel Smith
2021-05-14 22:55   ` Russell King (Oracle)
2021-05-14 20:59 ` [PATCH net-next v6 05/25] net: dsa: qca8k: handle error with qca8k_read operation Ansuel Smith
2021-05-14 23:01   ` Russell King (Oracle)
2021-05-14 20:59 ` [PATCH net-next v6 06/25] net: dsa: qca8k: handle error with qca8k_write operation Ansuel Smith
2021-05-14 20:59 ` [PATCH net-next v6 07/25] net: dsa: qca8k: handle error with qca8k_rmw operation Ansuel Smith
2021-05-14 20:59 ` [PATCH net-next v6 08/25] net: dsa: qca8k: handle error from qca8k_busy_wait Ansuel Smith
2021-05-14 20:59 ` Ansuel Smith [this message]
2021-05-14 21:00 ` [PATCH net-next v6 10/25] devicetree: net: dsa: qca8k: Document new compatible qca8327 Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 11/25] net: dsa: qca8k: add priority tweak to qca8337 switch Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 12/25] net: dsa: qca8k: limit port5 delay to qca8337 Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 13/25] net: dsa: qca8k: add GLOBAL_FC settings needed for qca8327 Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 14/25] net: dsa: qca8k: add support for switch rev Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 15/25] net: dsa: qca8k: add ethernet-ports fallback to setup_mdio_bus Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 16/25] net: dsa: qca8k: make rgmii delay configurable Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 17/25] net: dsa: qca8k: clear MASTER_EN after phy read/write Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 18/25] net: dsa: qca8k: dsa: qca8k: protect MASTER busy_wait with mdio mutex Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 19/25] net: dsa: qca8k: enlarge mdio delay and timeout Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 20/25] net: dsa: qca8k: add support for internal phy and internal mdio Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 21/25] devicetree: bindings: dsa: qca8k: Document internal mdio definition Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 22/25] net: dsa: qca8k: improve internal mdio read/write bus access Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 23/25] net: dsa: qca8k: pass switch_revision info to phy dev_flags Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 24/25] net: phy: at803x: clean whitespace errors Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 25/25] net: phy: add support for qca8k switch internal PHY in at803x Ansuel Smith
2021-05-14 22:40 ` [PATCH net-next v6 00/25] Multiple improvement to qca8k stability patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210514210015.18142-10-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.