From: Arnd Bergmann <arnd@kernel.org>
To: netdev@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>,
Paul Gortmaker <paul.gortmaker@windriver.com>,
"Maciej W. Rozycki" <macro@orcam.me.uk>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Doug Berger <opendmb@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Sam Creasey <sammy@sammy.net>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Finn Thain <fthain@telegraphics.com.au>,
Christophe JAILLET <christophe.jaillet@wanadoo.fr>,
Andrew Lunn <andrew@lunn.ch>, Alexei Starovoitov <ast@kernel.org>,
Eric Dumazet <edumazet@google.com>,
Andrii Nakryiko <andriin@fb.com>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
linux-kernel@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com
Subject: [RFC 08/13] [net-next] make legacy ISA probe optional
Date: Sun, 16 May 2021 00:13:15 +0200 [thread overview]
Message-ID: <20210515221320.1255291-9-arnd@kernel.org> (raw)
In-Reply-To: <20210515221320.1255291-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
There are very few ISA drivers left that rely on the static probing from
drivers/net/Space.o. Make them all select a new CONFIG_NETDEV_LEGACY_INIT
symbol, and drop the entire probe logic when that is disabled.
The 9 drivers that are called from Space.c are the same set that
calls netdev_boot_setup_check().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/net/Kconfig | 7 +++++++
drivers/net/Makefile | 3 ++-
drivers/net/appletalk/Kconfig | 4 +++-
drivers/net/ethernet/3com/Kconfig | 1 +
drivers/net/ethernet/8390/Kconfig | 3 +++
drivers/net/ethernet/8390/ne.c | 2 ++
drivers/net/ethernet/amd/Kconfig | 2 ++
drivers/net/ethernet/cirrus/Kconfig | 1 +
drivers/net/ethernet/smsc/Kconfig | 1 +
9 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 74dc8e249faa..6dccd68a99d3 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -603,4 +603,11 @@ config NET_FAILOVER
a VM with direct attached VF by failing over to the paravirtual
datapath when the VF is unplugged.
+config NETDEV_LEGACY_INIT
+ bool
+ depends on ISA
+ help
+ Drivers that call netdev_boot_setup_check() should select this
+ symbol, everything else no longer needs it.
+
endif # NETDEVICES
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 7ffd2d03efaf..e0ce373c68dd 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -18,7 +18,8 @@ obj-$(CONFIG_MACVLAN) += macvlan.o
obj-$(CONFIG_MACVTAP) += macvtap.o
obj-$(CONFIG_MII) += mii.o
obj-$(CONFIG_MDIO) += mdio.o
-obj-$(CONFIG_NET) += Space.o loopback.o
+obj-$(CONFIG_NET) += loopback.o
+obj-$(CONFIG_NETDEV_LEGACY_INIT) += Space.o
obj-$(CONFIG_NETCONSOLE) += netconsole.o
obj-y += phy/
obj-y += mdio/
diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig
index 43918398f0d3..90b9f1d6eda9 100644
--- a/drivers/net/appletalk/Kconfig
+++ b/drivers/net/appletalk/Kconfig
@@ -52,7 +52,9 @@ config LTPC
config COPS
tristate "COPS LocalTalk PC support"
- depends on DEV_APPLETALK && (ISA || EISA)
+ depends on DEV_APPLETALK && ISA
+ depends on NETDEVICES
+ select NETDEV_LEGACY_INIT
help
This allows you to use COPS AppleTalk cards to connect to LocalTalk
networks. You also need version 1.3.3 or later of the netatalk
diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig
index a52a3740f0c9..706bd59bf645 100644
--- a/drivers/net/ethernet/3com/Kconfig
+++ b/drivers/net/ethernet/3com/Kconfig
@@ -34,6 +34,7 @@ config EL3
config 3C515
tristate "3c515 ISA \"Fast EtherLink\""
depends on ISA && ISA_DMA_API && !PPC32
+ select NETDEV_LEGACY_INIT
help
If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
network card, say Y here.
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index 9f4b302fd2ce..a4130e643342 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -102,6 +102,7 @@ config MCF8390
config NE2000
tristate "NE2000/NE1000 support"
depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC)
+ select NETDEV_LEGACY_INIT if ISA
select CRC32
help
If you have a network (Ethernet) card of this type, say Y here.
@@ -169,6 +170,7 @@ config STNIC
config ULTRA
tristate "SMC Ultra support"
depends on ISA
+ select NETDEV_LEGACY_INIT
select CRC32
help
If you have a network (Ethernet) card of this type, say Y here.
@@ -186,6 +188,7 @@ config ULTRA
config WD80x3
tristate "WD80*3 support"
depends on ISA
+ select NETDEV_LEGACY_INIT
select CRC32
help
If you have a network (Ethernet) card of this type, say Y here.
diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c
index e9756d0ea5b8..d0bbe2180b9e 100644
--- a/drivers/net/ethernet/8390/ne.c
+++ b/drivers/net/ethernet/8390/ne.c
@@ -951,6 +951,7 @@ static int __init ne_init(void)
}
module_init(ne_init);
+#ifdef CONFIG_NETDEV_LEGACY_INIT
struct net_device * __init ne_probe(int unit)
{
int this_dev;
@@ -991,6 +992,7 @@ struct net_device * __init ne_probe(int unit)
return ERR_PTR(-ENODEV);
}
+#endif
#endif /* MODULE */
static void __exit ne_exit(void)
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
index d0b0609bbe23..c6a3abec86f5 100644
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -46,6 +46,7 @@ config AMD8111_ETH
config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
depends on ISA && ISA_DMA_API && !ARM && !PPC32
+ select NETDEV_LEGACY_INIT
help
If you have a network (Ethernet) card of this type, say Y here.
Some LinkSys cards are of this type.
@@ -132,6 +133,7 @@ config PCMCIA_NMCLAN
config NI65
tristate "NI6510 support"
depends on ISA && ISA_DMA_API && !ARM && !PPC32
+ select NETDEV_LEGACY_INIT
help
If you have a network (Ethernet) card of this type, say Y here.
diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig
index 7141340a8b0e..dac1764ba740 100644
--- a/drivers/net/ethernet/cirrus/Kconfig
+++ b/drivers/net/ethernet/cirrus/Kconfig
@@ -26,6 +26,7 @@ config CS89x0_ISA
depends on ISA
depends on !PPC32
depends on CS89x0_PLATFORM=n
+ select NETDEV_LEGACY_INIT
select CS89x0
help
Support for CS89x0 chipset based Ethernet cards. If you have a
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index c52a38df0e0d..72e42a868346 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -23,6 +23,7 @@ config SMC9194
tristate "SMC 9194 support"
depends on ISA
select CRC32
+ select NETDEV_LEGACY_INIT
help
This is support for the SMC9xxx based Ethernet cards. Choose this
option if you have a DELL laptop with the docking station, or
--
2.29.2
next prev parent reply other threads:[~2021-05-15 22:15 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-15 22:13 [RFC 00/13] [net-next] drivers/net/Space.c cleanup Arnd Bergmann
2021-05-15 22:13 ` [RFC 01/13] [net-next] bcmgenet: remove call to netdev_boot_setup_check Arnd Bergmann
2021-05-16 0:04 ` Florian Fainelli
2021-05-15 22:13 ` [RFC 02/13] [net-next] natsemi: sonic: stop calling netdev_boot_setup_check Arnd Bergmann
2021-05-15 22:13 ` [RFC 03/13] [net-next] appletalk: ltpc: remove static probing Arnd Bergmann
2021-05-15 22:13 ` [RFC 04/13] [net-next] 3c509: stop calling netdev_boot_setup_check Arnd Bergmann
2021-05-15 22:13 ` [RFC 05/13] [net-next] cs89x0: rework driver configuration Arnd Bergmann
2021-05-15 22:13 ` [RFC 06/13] [net-next] m68k: remove legacy probing Arnd Bergmann
2021-05-17 8:10 ` Geert Uytterhoeven
2021-05-15 22:13 ` [RFC 07/13] [net-next] move netdev_boot_setup into Space.c Arnd Bergmann
2021-05-15 22:13 ` Arnd Bergmann [this message]
2021-05-15 22:13 ` [RFC 09/13] [net-next] wan: remove stale Kconfig entries Arnd Bergmann
2021-05-15 22:13 ` [RFC 10/13] [net-next] wan: remove sbni/granch driver Arnd Bergmann
2021-05-15 22:13 ` [RFC 11/13] [net-next] wan: hostess_sv11: use module_init/module_exit helpers Arnd Bergmann
2021-05-15 22:13 ` [RFC 12/13] [net-next] ethernet: isa: convert to module_init/module_exit Arnd Bergmann
2021-05-15 22:13 ` [RFC 13/13] [net-next] 8390: xsurf100: avoid including lib8390.c Arnd Bergmann
2021-05-16 4:24 ` Finn Thain
2021-05-16 9:04 ` Geert Uytterhoeven
2021-05-16 9:39 ` Arnd Bergmann
2021-05-16 0:06 ` [RFC 00/13] [net-next] drivers/net/Space.c cleanup Maciej W. Rozycki
2021-05-16 9:27 ` Arnd Bergmann
2021-05-17 14:38 ` Paul Gortmaker
2021-05-17 15:40 ` Maciej W. Rozycki
2021-05-17 15:49 ` Arnd Bergmann
2021-05-17 23:04 ` Finn Thain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210515221320.1255291-9-arnd@kernel.org \
--to=arnd@kernel.org \
--cc=andrew@lunn.ch \
--cc=andriin@fb.com \
--cc=arnd@arndb.de \
--cc=ast@kernel.org \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bgolaszewski@baylibre.com \
--cc=christophe.jaillet@wanadoo.fr \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=fthain@telegraphics.com.au \
--cc=geert@linux-m68k.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=macro@orcam.me.uk \
--cc=netdev@vger.kernel.org \
--cc=opendmb@gmail.com \
--cc=paul.gortmaker@windriver.com \
--cc=sammy@sammy.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.