All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lu Baolu <baolu.lu@linux.intel.com>
To: Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>
Cc: kevin.tian@intel.com, ashok.raj@intel.com,
	sanjay.k.kumar@intel.com, linux-kernel@vger.kernel.org,
	iommu@lists.linux-foundation.org, jacob.jun.pan@intel.com
Subject: [PATCH v2 1/1] iommu/vt-d: Tweak the description of a DMA fault
Date: Mon, 17 May 2021 14:54:25 +0800	[thread overview]
Message-ID: <20210517065425.4953-1-baolu.lu@linux.intel.com> (raw)

The Intel IOMMU driver reports the DMA fault reason in a decimal number
while the VT-d specification uses a hexadecimal one. It's inconvenient
that users need to covert them everytime before consulting the spec.
Let's use hexadecimal number for a DMA fault reason.

The fault message uses 0xffffffff as PASID for DMA requests w/o PASID.
This is confusing. Tweak this by adding "NO_PASID" explicitly.

Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
 drivers/iommu/intel/dmar.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

Change log:
v1->v2:
 - Add "0x" prefix to all hex numbers

diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c
index 1757ac1e1623..1e31e6799d5c 100644
--- a/drivers/iommu/intel/dmar.c
+++ b/drivers/iommu/intel/dmar.c
@@ -1911,16 +1911,23 @@ static int dmar_fault_do_one(struct intel_iommu *iommu, int type,
 	reason = dmar_get_fault_reason(fault_reason, &fault_type);
 
 	if (fault_type == INTR_REMAP)
-		pr_err("[INTR-REMAP] Request device [%02x:%02x.%d] fault index %llx [fault reason %02d] %s\n",
-			source_id >> 8, PCI_SLOT(source_id & 0xFF),
-			PCI_FUNC(source_id & 0xFF), addr >> 48,
-			fault_reason, reason);
-	else
-		pr_err("[%s] Request device [%02x:%02x.%d] PASID %x fault addr %llx [fault reason %02d] %s\n",
+		pr_err("[INTR-REMAP] Request device [0x%02x:0x%02x.%d] fault index 0x%llx [fault reason 0x%02x] %s\n",
+		       source_id >> 8, PCI_SLOT(source_id & 0xFF),
+		       PCI_FUNC(source_id & 0xFF), addr >> 48,
+		       fault_reason, reason);
+	else if (pasid == INVALID_IOASID)
+		pr_err("[%s NO_PASID] Request device [0x%02x:0x%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n",
 		       type ? "DMA Read" : "DMA Write",
 		       source_id >> 8, PCI_SLOT(source_id & 0xFF),
-		       PCI_FUNC(source_id & 0xFF), pasid, addr,
+		       PCI_FUNC(source_id & 0xFF), addr,
 		       fault_reason, reason);
+	else
+		pr_err("[%s PASID 0x%x] Request device [0x%02x:0x%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n",
+		       type ? "DMA Read" : "DMA Write", pasid,
+		       source_id >> 8, PCI_SLOT(source_id & 0xFF),
+		       PCI_FUNC(source_id & 0xFF), addr,
+		       fault_reason, reason);
+
 	return 0;
 }
 
@@ -1987,7 +1994,7 @@ irqreturn_t dmar_fault(int irq, void *dev_id)
 		if (!ratelimited)
 			/* Using pasid -1 if pasid is not present */
 			dmar_fault_do_one(iommu, type, fault_reason,
-					  pasid_present ? pasid : -1,
+					  pasid_present ? pasid : INVALID_IOASID,
 					  source_id, guest_addr);
 
 		fault_index++;
-- 
2.25.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

WARNING: multiple messages have this Message-ID (diff)
From: Lu Baolu <baolu.lu@linux.intel.com>
To: Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>
Cc: ashok.raj@intel.com, kevin.tian@intel.com,
	jacob.jun.pan@intel.com, yi.l.liu@intel.com,
	sanjay.k.kumar@intel.com, iommu@lists.linux-foundation.org,
	linux-kernel@vger.kernel.org, Lu Baolu <baolu.lu@linux.intel.com>
Subject: [PATCH v2 1/1] iommu/vt-d: Tweak the description of a DMA fault
Date: Mon, 17 May 2021 14:54:25 +0800	[thread overview]
Message-ID: <20210517065425.4953-1-baolu.lu@linux.intel.com> (raw)

The Intel IOMMU driver reports the DMA fault reason in a decimal number
while the VT-d specification uses a hexadecimal one. It's inconvenient
that users need to covert them everytime before consulting the spec.
Let's use hexadecimal number for a DMA fault reason.

The fault message uses 0xffffffff as PASID for DMA requests w/o PASID.
This is confusing. Tweak this by adding "NO_PASID" explicitly.

Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
 drivers/iommu/intel/dmar.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

Change log:
v1->v2:
 - Add "0x" prefix to all hex numbers

diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c
index 1757ac1e1623..1e31e6799d5c 100644
--- a/drivers/iommu/intel/dmar.c
+++ b/drivers/iommu/intel/dmar.c
@@ -1911,16 +1911,23 @@ static int dmar_fault_do_one(struct intel_iommu *iommu, int type,
 	reason = dmar_get_fault_reason(fault_reason, &fault_type);
 
 	if (fault_type == INTR_REMAP)
-		pr_err("[INTR-REMAP] Request device [%02x:%02x.%d] fault index %llx [fault reason %02d] %s\n",
-			source_id >> 8, PCI_SLOT(source_id & 0xFF),
-			PCI_FUNC(source_id & 0xFF), addr >> 48,
-			fault_reason, reason);
-	else
-		pr_err("[%s] Request device [%02x:%02x.%d] PASID %x fault addr %llx [fault reason %02d] %s\n",
+		pr_err("[INTR-REMAP] Request device [0x%02x:0x%02x.%d] fault index 0x%llx [fault reason 0x%02x] %s\n",
+		       source_id >> 8, PCI_SLOT(source_id & 0xFF),
+		       PCI_FUNC(source_id & 0xFF), addr >> 48,
+		       fault_reason, reason);
+	else if (pasid == INVALID_IOASID)
+		pr_err("[%s NO_PASID] Request device [0x%02x:0x%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n",
 		       type ? "DMA Read" : "DMA Write",
 		       source_id >> 8, PCI_SLOT(source_id & 0xFF),
-		       PCI_FUNC(source_id & 0xFF), pasid, addr,
+		       PCI_FUNC(source_id & 0xFF), addr,
 		       fault_reason, reason);
+	else
+		pr_err("[%s PASID 0x%x] Request device [0x%02x:0x%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n",
+		       type ? "DMA Read" : "DMA Write", pasid,
+		       source_id >> 8, PCI_SLOT(source_id & 0xFF),
+		       PCI_FUNC(source_id & 0xFF), addr,
+		       fault_reason, reason);
+
 	return 0;
 }
 
@@ -1987,7 +1994,7 @@ irqreturn_t dmar_fault(int irq, void *dev_id)
 		if (!ratelimited)
 			/* Using pasid -1 if pasid is not present */
 			dmar_fault_do_one(iommu, type, fault_reason,
-					  pasid_present ? pasid : -1,
+					  pasid_present ? pasid : INVALID_IOASID,
 					  source_id, guest_addr);
 
 		fault_index++;
-- 
2.25.1


             reply	other threads:[~2021-05-17  6:55 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-17  6:54 Lu Baolu [this message]
2021-05-17  6:54 ` [PATCH v2 1/1] iommu/vt-d: Tweak the description of a DMA fault Lu Baolu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210517065425.4953-1-baolu.lu@linux.intel.com \
    --to=baolu.lu@linux.intel.com \
    --cc=ashok.raj@intel.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jacob.jun.pan@intel.com \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sanjay.k.kumar@intel.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.