diff for duplicates of <20210519202004.GA3566127@robh.at.kernel.org>

diff --git a/a/1.txt b/N1/1.txt
index 8d176c4..ecc1ae3 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -144,7 +144,7 @@ blank line between each DT property sub-schema please.
 > +examples:
 > +  - |
 > +    #include <dt-bindings/clock/ast2600-clock.h>
-> +    pwm_tach: pwm_tach at 1e610000 {
+> +    pwm_tach: pwm_tach@1e610000 {
 > +      compatible = "aspeed,ast2600-pwm-tach", "syscon", "simple-mfd";
 > +      reg = <0x1e610000 0x100>;
 > +      clocks = <&syscon ASPEED_CLK_AHB>;
@@ -157,7 +157,7 @@ blank line between each DT property sub-schema please.
 > +        #pwm-cells = <3>;
 > +        pinctrl-names = "default";
 > +        pinctrl-0 = <&pinctrl_pwm0_default>;
-> +        pwm-ch at 0 {
+> +        pwm-ch@0 {
 > +          reg = <0>;
 > +          aspeed,wdt-reload-enable;
 > +          aspeed,wdt-reload-duty-point = <32>;
@@ -177,7 +177,7 @@ Are pwm and tach separate h/w blocks?
 > +        #size-cells = <0>;
 > +        pinctrl-names = "default";
 > +        pinctrl-0 = <&pinctrl_tach0_default>;
-> +        fan at 0 {
+> +        fan@0 {
 > +          reg = <0>;
 
 How does one configure which PWM is connected to each fan?
diff --git a/a/content_digest b/N1/content_digest
index 30aa9b1..4a031df 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -1,9 +1,21 @@
  "ref\020210518005517.9036-1-billy_tsai@aspeedtech.com\0"
  "ref\020210518005517.9036-2-billy_tsai@aspeedtech.com\0"
  "From\0Rob Herring <robh@kernel.org>\0"
- "Subject\0[v6 1/2] dt-bindings: Add bindings for aspeed pwm-tach.\0"
+ "Subject\0Re: [v6 1/2] dt-bindings: Add bindings for aspeed pwm-tach.\0"
  "Date\0Wed, 19 May 2021 15:20:04 -0500\0"
- "To\0linux-aspeed@lists.ozlabs.org\0"
+ "To\0Billy Tsai <billy_tsai@aspeedtech.com>\0"
+ "Cc\0lee.jones@linaro.org"
+  joel@jms.id.au
+  andrew@aj.id.au
+  thierry.reding@gmail.com
+  u.kleine-koenig@pengutronix.de
+  p.zabel@pengutronix.de
+  devicetree@vger.kernel.org
+  linux-arm-kernel@lists.infradead.org
+  linux-aspeed@lists.ozlabs.org
+  linux-kernel@vger.kernel.org
+  linux-pwm@vger.kernel.org
+ " BMC-SW@aspeedtech.com\0"
  "\00:1\0"
  "b\0"
  "On Tue, May 18, 2021 at 08:55:16AM +0800, Billy Tsai wrote:\n"
@@ -152,7 +164,7 @@
  "> +examples:\n"
  "> +  - |\n"
  "> +    #include <dt-bindings/clock/ast2600-clock.h>\n"
- "> +    pwm_tach: pwm_tach at 1e610000 {\n"
+ "> +    pwm_tach: pwm_tach@1e610000 {\n"
  "> +      compatible = \"aspeed,ast2600-pwm-tach\", \"syscon\", \"simple-mfd\";\n"
  "> +      reg = <0x1e610000 0x100>;\n"
  "> +      clocks = <&syscon ASPEED_CLK_AHB>;\n"
@@ -165,7 +177,7 @@
  "> +        #pwm-cells = <3>;\n"
  "> +        pinctrl-names = \"default\";\n"
  "> +        pinctrl-0 = <&pinctrl_pwm0_default>;\n"
- "> +        pwm-ch at 0 {\n"
+ "> +        pwm-ch@0 {\n"
  "> +          reg = <0>;\n"
  "> +          aspeed,wdt-reload-enable;\n"
  "> +          aspeed,wdt-reload-duty-point = <32>;\n"
@@ -185,7 +197,7 @@
  "> +        #size-cells = <0>;\n"
  "> +        pinctrl-names = \"default\";\n"
  "> +        pinctrl-0 = <&pinctrl_tach0_default>;\n"
- "> +        fan at 0 {\n"
+ "> +        fan@0 {\n"
  "> +          reg = <0>;\n"
  "\n"
  "How does one configure which PWM is connected to each fan?\n"
@@ -271,4 +283,4 @@
  "> 2.25.1\n"
  >
 
-659461fe3cf9225b576ea836ca8e5a8302c8444b848b76693cd4063179feb5f6
+c58d4c826258bd4e919681d123e593bd3e1718c3ab3c606b898b85bd695a6335
