From: guopingjn@gmail.com
To: joel@jms.id.au, andrew@aj.id.au, openbmc@lists.ozlabs.org
Cc: guoping@inspur.com, liuxiwei@inspur.com, banht@inspur.com,
wangxinglong@inspur.com
Subject: [PATCH 1/1] ARM: dts: aspeed: Add Inspur NF5280M6 BMC machine
Date: Tue, 25 May 2021 14:47:37 +0800 [thread overview]
Message-ID: <20210525064737.14750-1-guopingjn@gmail.com> (raw)
From: Ping Guo <guoping@inspur.com>
The Inspur NF5280M6 is an x86 platform server with an AST2500-based BMC.
This dts file provides a basic configuration for its OpenBMC
development.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Signed-off-by: Ping Guo <guoping@inspur.com>
---
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/aspeed-bmc-inspur-nf5280m6.dts | 707 ++++++++++++++++++
2 files changed, 708 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 03b5424bafa8..cc2580f1e99b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1405,6 +1405,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-ibm-rainier-4u.dtb \
aspeed-bmc-intel-s2600wf.dtb \
aspeed-bmc-inspur-fp5280g2.dtb \
+ aspeed-bmc-inspur-nf5280m6.dtb \
aspeed-bmc-lenovo-hr630.dtb \
aspeed-bmc-lenovo-hr855xg2.dtb \
aspeed-bmc-microsoft-olympus.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
new file mode 100644
index 000000000000..af935a43b3e1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
@@ -0,0 +1,707 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "NF5280M6 BMC";
+ compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@9f000000 {
+ no-map;
+ reg = <0x9f000000 0x01000000>; /* 16M */
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ bmc_alive {
+ label = "bmc_alive";
+ gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ led-pattern = <1000 1000>;
+ };
+
+ front-fan {
+ label = "front-fan";
+ gpios = <&gpio ASPEED_GPIO(F,2) GPIO_ACTIVE_LOW>;
+ };
+
+ front-psu {
+ label = "front-psu";
+ gpios = <&gpio ASPEED_GPIO(F,3) GPIO_ACTIVE_LOW>;
+ };
+
+ front-syshot {
+ label = "front-syshot";
+ gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ front-memory {
+ label = "front-memory";
+ gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>;
+ };
+
+ identify {
+ label = "identify";
+ gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bios";
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+ <&syscon ASPEED_CLK_MAC1RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&gpio {
+ power_out {
+ gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_LOW>;
+ output-low;
+ };
+};
+
+&gpio {
+ status = "okay";
+ /* Enable GPIOE0 and GPIOE2 pass-through by default */
+ pinctrl-names = "pass-through";
+ pinctrl-0 = <&pinctrl_gpie0_default
+ &pinctrl_gpie2_default>;
+ gpio-line-names =
+ /*A0-A7*/ "","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","",
+ /*B0-B7*/ "BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N",
+ "FM_CPU_MSMI_CATERR_LVT3_BMC_N","","FM_CPU0_PROCHOT_LVT3_N",
+ "FM_CPU_MEM_THERMTRIP_LVT3_N","BIOS_LOAD_DEFAULT_R_N",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2",
+ "BMC_SD2DAT3","BMC_SD2DET","BMC_SD2WPT",
+ /*E0-E7*/ "FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3",
+ "FM_BOARD_ID4","FM_BOARD_ID5","","",
+ /*F0-F7*/ "PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N",
+ "BIOS_DEBUG_MODE_N","FP_LCD_RESET","FAN_TYPE_SEL",
+ "RST_GLB_RST_WARN_N",
+ /*G0-G7*/ "IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC",
+ "BMC_JTAG_TCK_MUX_SEL","BMC_BIOS_RESERVED","SYS_NMI_N","BMC_NMI_N",
+ /*H0-H7*/ "JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6",
+ "FM_SKU_ID0","IRQ_SML1_PMBUS_ALERT_N","IRQ_SML0_ALERT_MUX_N",
+ /*I0-I7*/ "FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N",
+ "FM_SYS_THROTTLE_LVC3","SPI2_PCH_CS0_N","","","",
+ /*J0-J7*/ "FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N",
+ "VGA_HSYNC","VGA_VSYNC","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","SYS_UART_TXD1","SYS_UART_RXD1",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","","","",
+ /*Q0-Q7*/ "","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N",
+ /*R0-R7*/ "SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N",
+ "DBP_CPU_PREQ_N","FM_CPU_ERR2_LVT3_BMC_N",
+ "RISER_NCSI_EN_N","","LOM_NCSI_EN_N","OCP_NCSI_EN_N",
+ /*S0-S7*/ "BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","",
+ "GPIOS5_BMC","","GPIOS7_BMC",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","",
+ /*Z0-Z7*/ "XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","",
+ "GPIOZ5","","",
+ /*AA0-AA7*/ "FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC",
+ "FM_SLPS4_R_N","","POWER_BUTTON","POWER_OUT",
+ /*AB0-AB7*/ "RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","",
+ /*AC0-AC7*/ "","","","","","","","";
+};
+
+&i2c0 {
+ /* FP_LCD */
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ label = "fru";
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ tmp112@48 {
+ compatible = "ti,tmp112";
+ reg = <0x48>;
+ label = "inlet";
+ };
+
+ tmp112@49 {
+ compatible = "ti,tmp112";
+ reg = <0x49>;
+ label = "outlet";
+ };
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ };
+
+ pca9548@71 {
+ compatible = "nxp,pca9548";
+ reg = <0x71>;
+ };
+
+ pca9548@72 {
+ compatible = "nxp,pca9548";
+ reg = <0x72>;
+ };
+};
+
+&i2c4 {
+ /* IPMB */
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ adm1278@33 {
+ compatible = "adi,adm1293";
+ reg = <0x33>;
+ };
+
+ adm1278@32 {
+ compatible = "adi,adm1293";
+ reg = <0x32>;
+ };
+
+ adm1278@20 {
+ compatible = "adi,adm1293";
+ reg = <0x20>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ pca0: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca1: pca9555@22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca2: pca9555@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca3: pca9555@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+};
+
+&i2c9 {
+ /* cpld */
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+
+ pca4: pca9555@24 {
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca5: pca9555@25 {
+ compatible = "nxp,pca9555";
+ reg = <0x25>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ power-supply@58 {
+ compatible = "inspur,ipsps1";
+ reg = <0x58>;
+ };
+
+ power-supply@59 {
+ compatible = "inspur,ipsps1";
+ reg = <0x59>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default
+ &pinctrl_pwm4_default &pinctrl_pwm5_default
+ &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+ };
+
+ fan@5 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+ };
+
+ fan@6 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+ };
+
+ fan@7 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+ };
+};
+
+&kcs3 {
+ status = "okay";
+ kcs_addr = <0xca2>;
+};
+
+&kcs4 {
+ status = "okay";
+ kcs_addr = <0xca4>;
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
+ &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
+ &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
+ &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
+ &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+&vuart {
+ status = "okay";
+};
--
2.17.1
next reply other threads:[~2021-05-25 6:48 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-25 6:47 guopingjn [this message]
2021-05-25 7:18 ` [PATCH 1/1] ARM: dts: aspeed: Add Inspur NF5280M6 BMC machine Joel Stanley
2021-05-25 7:27 ` Joel Stanley
2021-05-26 5:33 ` Ping Guo
-- strict thread matches above, loose matches on Subject: below --
2021-05-24 1:27 guopingjn
2021-05-24 0:30 guopingjn
2021-05-24 2:40 ` Joel Stanley
2021-05-25 3:12 ` Ping Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210525064737.14750-1-guopingjn@gmail.com \
--to=guopingjn@gmail.com \
--cc=andrew@aj.id.au \
--cc=banht@inspur.com \
--cc=guoping@inspur.com \
--cc=joel@jms.id.au \
--cc=liuxiwei@inspur.com \
--cc=openbmc@lists.ozlabs.org \
--cc=wangxinglong@inspur.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.