From: Saeed Mahameed <saeed@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org, Tariq Toukan <tariqt@nvidia.com>,
Huy Nguyen <huyn@nvidia.com>, Raed Salem <raeds@nvidia.com>,
Paul Blakey <paulb@nvidia.com>, Roi Dayan <roid@nvidia.com>,
Saeed Mahameed <saeedm@nvidia.com>
Subject: [net-next V2 04/15] net/mlx5e: TC: Reserved bit 31 of REG_C1 for IPsec offload
Date: Thu, 27 May 2021 11:56:13 -0700 [thread overview]
Message-ID: <20210527185624.694304-5-saeed@kernel.org> (raw)
In-Reply-To: <20210527185624.694304-1-saeed@kernel.org>
From: Huy Nguyen <huyn@nvidia.com>
Currently ASAP features fully utilize all the bits of the CQE's flow tag
and ft_metadata field. The flow tag field cannot be used because the
flow table tagging in FTE does not allow partial write.
We agree to reserve bit 31 of CQE's ft_metadata for IPsec to avoid
ASAP CT from dropping IPsec offloaded packet
Here is the new bit layout of REG_C1. Tunnel option id is reduced to
11 bits:
< IPSEC MARKER (1) | ESW_TUN_ID(12) | ESW_TUN_OPTS(11) | ESW_ZONE_ID(8) >
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
---
.../net/ethernet/mellanox/mlx5/core/en/rep/tc.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/en_tc.h | 2 +-
include/linux/mlx5/eswitch.h | 17 ++++++++++-------
3 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c
index 6cdc52d50a48..8cef4e7cfa4b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c
@@ -617,7 +617,7 @@ static bool mlx5e_restore_skb(struct sk_buff *skb, u32 chain, u32 reg_c1,
struct mlx5e_tc_update_priv *tc_priv)
{
struct mlx5e_priv *priv = netdev_priv(skb->dev);
- u32 tunnel_id = reg_c1 >> ESW_TUN_OFFSET;
+ u32 tunnel_id = (reg_c1 >> ESW_TUN_OFFSET) & TUNNEL_ID_MASK;
if (chain) {
struct mlx5_rep_uplink_priv *uplink_priv;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.h b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.h
index 3534d14d7d5c..721093b55acc 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.h
@@ -129,7 +129,7 @@ struct tunnel_match_enc_opts {
*/
#define TUNNEL_INFO_BITS 12
#define TUNNEL_INFO_BITS_MASK GENMASK(TUNNEL_INFO_BITS - 1, 0)
-#define ENC_OPTS_BITS 12
+#define ENC_OPTS_BITS 11
#define ENC_OPTS_BITS_MASK GENMASK(ENC_OPTS_BITS - 1, 0)
#define TUNNEL_ID_BITS (TUNNEL_INFO_BITS + ENC_OPTS_BITS)
#define TUNNEL_ID_MASK GENMASK(TUNNEL_ID_BITS - 1, 0)
diff --git a/include/linux/mlx5/eswitch.h b/include/linux/mlx5/eswitch.h
index 17109b65c1ac..bc7db2e059eb 100644
--- a/include/linux/mlx5/eswitch.h
+++ b/include/linux/mlx5/eswitch.h
@@ -98,10 +98,11 @@ u32 mlx5_eswitch_get_vport_metadata_for_set(struct mlx5_eswitch *esw,
u16 vport_num);
/* Reg C1 usage:
- * Reg C1 = < ESW_TUN_ID(12) | ESW_TUN_OPTS(12) | ESW_ZONE_ID(8) >
+ * Reg C1 = < Reserved(1) | ESW_TUN_ID(12) | ESW_TUN_OPTS(11) | ESW_ZONE_ID(8) >
*
- * Highest 12 bits of reg c1 is the encapsulation tunnel id, next 12 bits is
- * encapsulation tunnel options, and the lowest 8 bits are used for zone id.
+ * Highest bit is reserved for other offloads as marker bit, next 12 bits of reg c1
+ * is the encapsulation tunnel id, next 11 bits is encapsulation tunnel options,
+ * and the lowest 8 bits are used for zone id.
*
* Zone id is used to restore CT flow when packet misses on chain.
*
@@ -109,16 +110,18 @@ u32 mlx5_eswitch_get_vport_metadata_for_set(struct mlx5_eswitch *esw,
* on miss and to support inner header rewrite by means of implicit chain 0
* flows.
*/
+#define ESW_RESERVED_BITS 1
#define ESW_ZONE_ID_BITS 8
-#define ESW_TUN_OPTS_BITS 12
+#define ESW_TUN_OPTS_BITS 11
#define ESW_TUN_ID_BITS 12
#define ESW_TUN_OPTS_OFFSET ESW_ZONE_ID_BITS
#define ESW_TUN_OFFSET ESW_TUN_OPTS_OFFSET
#define ESW_ZONE_ID_MASK GENMASK(ESW_ZONE_ID_BITS - 1, 0)
-#define ESW_TUN_OPTS_MASK GENMASK(32 - ESW_TUN_ID_BITS - 1, ESW_TUN_OPTS_OFFSET)
-#define ESW_TUN_MASK GENMASK(31, ESW_TUN_OFFSET)
+#define ESW_TUN_OPTS_MASK GENMASK(31 - ESW_TUN_ID_BITS - ESW_RESERVED_BITS, ESW_TUN_OPTS_OFFSET)
+#define ESW_TUN_MASK GENMASK(31 - ESW_RESERVED_BITS, ESW_TUN_OFFSET)
#define ESW_TUN_ID_SLOW_TABLE_GOTO_VPORT 0 /* 0 is not a valid tunnel id */
-#define ESW_TUN_OPTS_SLOW_TABLE_GOTO_VPORT 0xFFF /* 0xFFF is a reserved mapping */
+/* 0x7FF is a reserved mapping */
+#define ESW_TUN_OPTS_SLOW_TABLE_GOTO_VPORT GENMASK(ESW_TUN_OPTS_BITS - 1, 0)
#define ESW_TUN_SLOW_TABLE_GOTO_VPORT ((ESW_TUN_ID_SLOW_TABLE_GOTO_VPORT << ESW_TUN_OPTS_BITS) | \
ESW_TUN_OPTS_SLOW_TABLE_GOTO_VPORT)
#define ESW_TUN_SLOW_TABLE_GOTO_VPORT_MARK ESW_TUN_OPTS_MASK
--
2.31.1
next prev parent reply other threads:[~2021-05-27 18:56 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-27 18:56 [pull request][net-next V2 00/15] mlx5 misc updates 2021-05-26 Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 01/15] net/mlx5e: CT, Remove newline from ct_dbg call Saeed Mahameed
2021-05-28 0:30 ` patchwork-bot+netdevbpf
2021-05-27 18:56 ` [net-next V2 02/15] net/mlx5: CT: Avoid reusing modify header context for natted entries Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 03/15] net/mlx5e: TC: Use bit counts for register mapping Saeed Mahameed
2021-05-27 18:56 ` Saeed Mahameed [this message]
2021-05-27 18:56 ` [net-next V2 05/15] net/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packet Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 06/15] net/mlx5e: RX, Remove unnecessary check in RX CQE compression handling Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 07/15] net/mlx5: DR, Remove unused field of send_ring struct Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 08/15] net/mlx5: Add case for FS_FT_NIC_TX FT in MLX5_CAP_FLOWTABLE_TYPE Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 09/15] net/mlx5: Move table size calculation to steering cmd layer Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 10/15] net/mlx5: Move chains ft pool to be used by all firmware steering Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 11/15] net/mlx5: DR, Set max table size to 2G entries Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 12/15] net/mlx5: Cap the maximum flow group size to 16M entries Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 13/15] net/mlx5: Remove unnecessary spin lock protection Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 14/15] net/mlx5: Use boolean arithmetic to evaluate roce_lag Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 15/15] net/mlx5: Fix lag port remapping logic Saeed Mahameed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210527185624.694304-5-saeed@kernel.org \
--to=saeed@kernel.org \
--cc=davem@davemloft.net \
--cc=huyn@nvidia.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=paulb@nvidia.com \
--cc=raeds@nvidia.com \
--cc=roid@nvidia.com \
--cc=saeedm@nvidia.com \
--cc=tariqt@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.