[PATCH 2/2] rtw88: refine unwanted h2c command

[Ping-Ke Shih <pkshih@realtek.com>]

From: Po-Hao Huang <phhuang@realtek.com>

Don't send beacon filter h2c when there is no valid context.
Return early instead of printing out warning messages, so others
won't get confused.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 drivers/net/wireless/realtek/rtw88/fw.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/fw.c b/drivers/net/wireless/realtek/rtw88/fw.c
index 58f4e47aa96a..176e8b67530e 100644
--- a/drivers/net/wireless/realtek/rtw88/fw.c
+++ b/drivers/net/wireless/realtek/rtw88/fw.c
@@ -601,7 +601,7 @@ void rtw_fw_beacon_filter_config(struct rtw_dev *rtwdev, bool connect,
 	s32 threshold = bss_conf->cqm_rssi_thold + rssi_offset;
 	u8 h2c_pkt[H2C_PKT_SIZE] = {0};
 
-	if (!rtw_fw_feature_check(&rtwdev->fw, FW_FEATURE_BCN_FILTER))
+	if (!rtw_fw_feature_check(&rtwdev->fw, FW_FEATURE_BCN_FILTER) || !si)
 		return;
 
 	if (!connect) {
@@ -623,10 +623,7 @@ void rtw_fw_beacon_filter_config(struct rtw_dev *rtwdev, bool connect,
 					       BCN_FILTER_OFFLOAD_MODE_DEFAULT);
 	SET_BCN_FILTER_OFFLOAD_P1_THRESHOLD(h2c_pkt, (u8)threshold);
 	SET_BCN_FILTER_OFFLOAD_P1_BCN_LOSS_CNT(h2c_pkt, BCN_LOSS_CNT);
-	if (si)
-		SET_BCN_FILTER_OFFLOAD_P1_MACID(h2c_pkt, si->mac_id);
-	else
-		rtw_warn(rtwdev, "CQM config with station not found\n");
+	SET_BCN_FILTER_OFFLOAD_P1_MACID(h2c_pkt, si->mac_id);
 	SET_BCN_FILTER_OFFLOAD_P1_HYST(h2c_pkt, bss_conf->cqm_rssi_hyst);
 	SET_BCN_FILTER_OFFLOAD_P1_BCN_INTERVAL(h2c_pkt, bss_conf->beacon_int);
 	rtw_fw_send_h2c_command(rtwdev, h2c_pkt);
-- 
2.25.1