From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Zheyu Ma <zheyuma97@gmail.com>
Subject: [PATCH 4.9 21/66] serial: rp2: use request_firmware instead of request_firmware_nowait
Date: Mon, 31 May 2021 15:13:54 +0200 [thread overview]
Message-ID: <20210531130636.934436084@linuxfoundation.org> (raw)
In-Reply-To: <20210531130636.254683895@linuxfoundation.org>
From: Zheyu Ma <zheyuma97@gmail.com>
commit 016002848c82eeb5d460489ce392d91fe18c475c upstream.
In 'rp2_probe', the driver registers 'rp2_uart_interrupt' then calls
'rp2_fw_cb' through 'request_firmware_nowait'. In 'rp2_fw_cb', if the
firmware don't exists, function just return without initializing ports
of 'rp2_card'. But now the interrupt handler function has been
registered, and when an interrupt comes, 'rp2_uart_interrupt' may access
those ports then causing NULL pointer dereference or other bugs.
Because the driver does some initialization work in 'rp2_fw_cb', in
order to make the driver ready to handle interrupts, 'request_firmware'
should be used instead of asynchronous 'request_firmware_nowait'.
This report reveals it:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xec/0x156 lib/dump_stack.c:118
assign_lock_key kernel/locking/lockdep.c:727 [inline]
register_lock_class+0x14e5/0x1ba0 kernel/locking/lockdep.c:753
__lock_acquire+0x187/0x3750 kernel/locking/lockdep.c:3303
lock_acquire+0x124/0x340 kernel/locking/lockdep.c:3907
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x32/0x50 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
rp2_ch_interrupt drivers/tty/serial/rp2.c:466 [inline]
rp2_asic_interrupt.isra.9+0x15d/0x990 drivers/tty/serial/rp2.c:493
rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504
__handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
</IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8
8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90
90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200
RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840
R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002
R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000
arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
cpuidle_idle_call kernel/sched/idle.c:153 [inline]
do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
PGD 8000000056d27067 P4D 8000000056d27067 PUD 56d28067 PMD 0
Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline]
RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline]
RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c:
493
Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1 e8
03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89 c1
89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83
RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1
RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820
RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05
R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000
R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0
FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504
__handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
</IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7
f8 8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90
90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200
RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840
R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002
R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000
arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
cpuidle_idle_call kernel/sched/idle.c:153 [inline]
do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
Modules linked in:
Dumping ftrace buffer:
(ftrace buffer empty)
CR2: 0000000000000010
---[ end trace 11804dbb55cb1a64 ]---
RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline]
RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline]
RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c:
493
Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1
e8 03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89
c1 89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83
RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1
RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820
RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05
R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000
R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0
FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/1621577323-1541-1-git-send-email-zheyuma97@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/rp2.c | 52 +++++++++++++++--------------------------------
1 file changed, 17 insertions(+), 35 deletions(-)
--- a/drivers/tty/serial/rp2.c
+++ b/drivers/tty/serial/rp2.c
@@ -198,7 +198,6 @@ struct rp2_card {
void __iomem *bar0;
void __iomem *bar1;
spinlock_t card_lock;
- struct completion fw_loaded;
};
#define RP_ID(prod) PCI_VDEVICE(RP, (prod))
@@ -667,17 +666,10 @@ static void rp2_remove_ports(struct rp2_
card->initialized_ports = 0;
}
-static void rp2_fw_cb(const struct firmware *fw, void *context)
+static int rp2_load_firmware(struct rp2_card *card, const struct firmware *fw)
{
- struct rp2_card *card = context;
resource_size_t phys_base;
- int i, rc = -ENOENT;
-
- if (!fw) {
- dev_err(&card->pdev->dev, "cannot find '%s' firmware image\n",
- RP2_FW_NAME);
- goto no_fw;
- }
+ int i, rc = 0;
phys_base = pci_resource_start(card->pdev, 1);
@@ -723,23 +715,13 @@ static void rp2_fw_cb(const struct firmw
card->initialized_ports++;
}
- release_firmware(fw);
-no_fw:
- /*
- * rp2_fw_cb() is called from a workqueue long after rp2_probe()
- * has already returned success. So if something failed here,
- * we'll just leave the now-dormant device in place until somebody
- * unbinds it.
- */
- if (rc)
- dev_warn(&card->pdev->dev, "driver initialization failed\n");
-
- complete(&card->fw_loaded);
+ return rc;
}
static int rp2_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
+ const struct firmware *fw;
struct rp2_card *card;
struct rp2_uart_port *ports;
void __iomem * const *bars;
@@ -750,7 +732,6 @@ static int rp2_probe(struct pci_dev *pde
return -ENOMEM;
pci_set_drvdata(pdev, card);
spin_lock_init(&card->card_lock);
- init_completion(&card->fw_loaded);
rc = pcim_enable_device(pdev);
if (rc)
@@ -783,21 +764,23 @@ static int rp2_probe(struct pci_dev *pde
return -ENOMEM;
card->ports = ports;
- rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
- IRQF_SHARED, DRV_NAME, card);
- if (rc)
+ rc = request_firmware(&fw, RP2_FW_NAME, &pdev->dev);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "cannot find '%s' firmware image\n",
+ RP2_FW_NAME);
return rc;
+ }
- /*
- * Only catastrophic errors (e.g. ENOMEM) are reported here.
- * If the FW image is missing, we'll find out in rp2_fw_cb()
- * and print an error message.
- */
- rc = request_firmware_nowait(THIS_MODULE, 1, RP2_FW_NAME, &pdev->dev,
- GFP_KERNEL, card, rp2_fw_cb);
+ rc = rp2_load_firmware(card, fw);
+
+ release_firmware(fw);
+ if (rc < 0)
+ return rc;
+
+ rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
+ IRQF_SHARED, DRV_NAME, card);
if (rc)
return rc;
- dev_dbg(&pdev->dev, "waiting for firmware blob...\n");
return 0;
}
@@ -806,7 +789,6 @@ static void rp2_remove(struct pci_dev *p
{
struct rp2_card *card = pci_get_drvdata(pdev);
- wait_for_completion(&card->fw_loaded);
rp2_remove_ports(card);
}
next prev parent reply other threads:[~2021-05-31 13:26 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-31 13:13 [PATCH 4.9 00/66] 4.9.271-rc1 review Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 01/66] mm, vmstat: drop zone->lock in /proc/pagetypeinfo Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 02/66] tweewide: Fix most Shebang lines Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 03/66] scripts: switch explicitly to Python 3 Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 04/66] netfilter: x_tables: Use correct memory barriers Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 05/66] NFC: nci: fix memory leak in nci_allocate_device Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 06/66] NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return() Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 07/66] proc: Check /proc/$pid/attr/ writes against file opener Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 08/66] net: hso: fix control-request directions Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 09/66] mac80211: assure all fragments are encrypted Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 10/66] mac80211: prevent mixed key and fragment cache attacks Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 11/66] cfg80211: mitigate A-MSDU aggregation attacks Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 12/66] mac80211: check defrag PN against current frame Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 13/66] ath10k: Validate first subframe of A-MSDU before processing the list Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 14/66] dm snapshot: properly fix a crash when an origin has no snapshots Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 15/66] kgdb: fix gcc-11 warnings harder Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 16/66] misc/uss720: fix memory leak in uss720_probe Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 17/66] mei: request autosuspend after sending rx flow control Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 18/66] staging: iio: cdc: ad7746: avoid overwrite of num_channels Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 19/66] iio: adc: ad7793: Add missing error code in ad7793_setup() Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 20/66] USB: trancevibrator: fix control-request direction Greg Kroah-Hartman
2021-05-31 13:13 ` Greg Kroah-Hartman [this message]
2021-05-31 13:13 ` [PATCH 4.9 22/66] USB: serial: ti_usb_3410_5052: add startech.com device id Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 23/66] USB: serial: option: add Telit LE910-S1 compositions 0x7010, 0x7011 Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 24/66] USB: serial: ftdi_sio: add IDs for IDS GmbH Products Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 25/66] USB: serial: pl2303: add device id for ADLINK ND-6530 GC Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.9 26/66] net: usb: fix memory leak in smsc75xx_bind Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 27/66] spi: Fix use-after-free with devm_spi_alloc_* Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 28/66] Bluetooth: cmtp: fix file refcount when cmtp_attach_device fails Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 29/66] NFS: fix an incorrect limit in filelayout_decode_layout() Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 30/66] NFS: Dont corrupt the value of pg_bytes_written in nfs_do_recoalesce() Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 31/66] NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 32/66] net/mlx4: Fix EEPROM dump support Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 33/66] Revert "net:tipc: Fix a double free in tipc_sk_mcast_rcv" Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 34/66] tipc: skb_linearize the head skb when reassembling msgs Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 35/66] i2c: s3c2410: fix possible NULL pointer deref on read message after write Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 36/66] i2c: i801: Dont generate an interrupt on bus reset Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 37/66] perf jevents: Fix getting maximum number of fds Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 38/66] platform/x86: hp_accel: Avoid invoking _INI to speed up resume Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 39/66] serial: max310x: unregister uart driver in case of failure and abort Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 40/66] net: fujitsu: fix potential null-ptr-deref Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 41/66] net: caif: remove BUG_ON(dev == NULL) in caif_xmit Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 42/66] char: hpet: add checks after calling ioremap Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 43/66] ALSA: sb8: Add a comment note regarding an unused pointer Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 44/66] isdn: mISDNinfineon: check/cleanup ioremap failure correctly in setup_io Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 45/66] dmaengine: qcom_hidma: comment platform_driver_register call Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 46/66] libertas: register sysfs groups properly Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 47/66] media: dvb: Add check on sp8870_readreg return Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 48/66] media: gspca: properly check for errors in po1030_probe() Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 49/66] scsi: BusLogic: Fix 64-bit system enumeration error for Buslogic Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 50/66] openrisc: Define memory barrier mb Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 51/66] btrfs: do not BUG_ON in link_to_fixup_dir Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 52/66] platform/x86: intel_punit_ipc: Append MODULE_DEVICE_TABLE for ACPI Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 53/66] drm/amdgpu: Fix a use-after-free Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 54/66] net: netcp: Fix an error message Greg Kroah-Hartman
2021-05-31 18:43 ` Marion & Christophe JAILLET
2021-05-31 13:14 ` [PATCH 4.9 55/66] net: mdio: thunder: Fix a double free issue in the .remove function Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 56/66] net: mdio: octeon: Fix some double free issues Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 57/66] net: bnx2: Fix error return code in bnx2_init_board() Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 58/66] mld: fix panic in mld_newpack() Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 59/66] staging: emxx_udc: fix loop in _nbu2ss_nuke() Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 60/66] ASoC: cs35l33: fix an error code in probe() Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 61/66] scsi: libsas: Use _safe() loop in sas_resume_port() Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 62/66] sch_dsmark: fix a NULL deref in qdisc_reset() Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 63/66] MIPS: alchemy: xxs1500: add gpio-au1000.h header file Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 64/66] MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 65/66] hugetlbfs: hugetlb_fault_mutex_hash() cleanup Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.9 66/66] usb: core: reduce power-on-good delay time of root hub Greg Kroah-Hartman
2021-06-01 2:13 ` [PATCH 4.9 00/66] 4.9.271-rc1 review Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210531130636.934436084@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=zheyuma97@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.