All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Chen <peter.chen@kernel.org>
To: Jack Pham <jackp@codeaurora.org>
Cc: Felipe Balbi <balbi@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Roger Quadros <rogerq@kernel.org>,
	linux-usb@vger.kernel.org, Wesley Cheng <wcheng@codeaurora.org>
Subject: Re: [PATCH] usb: dwc3: debugfs: Add and remove endpoint dirs dynamically
Date: Wed, 2 Jun 2021 08:55:58 +0800	[thread overview]
Message-ID: <20210602005558.GA26785@nchen> (raw)
In-Reply-To: <20210529192932.22912-1-jackp@codeaurora.org>

On 21-05-29 12:29:32, Jack Pham wrote:
> The DWC3 DebugFS directory and files are currently created once
> during probe.  This includes creation of subdirectories for each
> of the gadget's endpoints.  This works fine for peripheral-only
> controllers, as dwc3_core_init_mode() calls dwc3_gadget_init()
> just prior to calling dwc3_debugfs_init().
> 
> However, for dual-role controllers, dwc3_core_init_mode() will
> instead call dwc3_drd_init() which is problematic in a few ways.
> First, the initial state must be determined, then dwc3_set_mode()
> will have to schedule drd_work and by then dwc3_debugfs_init()
> could have already been invoked.  Even if the initial mode is
> peripheral, dwc3_gadget_init() happens after the DebugFS files
> are created, and worse so if the initial state is host and the
> controller switches to peripheral much later.  And secondly,
> even if the gadget endpoints' debug entries were successfully
> created, if the controller exits peripheral mode, its dwc3_eps
> are freed so the debug files would now hold stale references.
> 
> So it is best if the DebugFS endpoint entries are created and
> removed dynamically at the same time the underlying dwc3_eps are.
> Do this by calling dwc3_debugfs_create_endpoint_dir() as each
> endpoint is created, and conversely remove the DebugFS entry when
> the endpoint is freed.
> 
> Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly")
> Signed-off-by: Jack Pham <jackp@codeaurora.org>

Reviewed-by: Peter Chen <peter.chen@kernel.org>

Peter
> ---
>  drivers/usb/dwc3/debug.h   |  3 +++
>  drivers/usb/dwc3/debugfs.c | 21 ++-------------------
>  drivers/usb/dwc3/gadget.c  |  3 +++
>  3 files changed, 8 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
> index d0ac89c5b317..d223c54115f4 100644
> --- a/drivers/usb/dwc3/debug.h
> +++ b/drivers/usb/dwc3/debug.h
> @@ -413,9 +413,12 @@ static inline const char *dwc3_gadget_generic_cmd_status_string(int status)
>  
>  
>  #ifdef CONFIG_DEBUG_FS
> +extern void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep);
>  extern void dwc3_debugfs_init(struct dwc3 *d);
>  extern void dwc3_debugfs_exit(struct dwc3 *d);
>  #else
> +static inline void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep)
> +{  }
>  static inline void dwc3_debugfs_init(struct dwc3 *d)
>  {  }
>  static inline void dwc3_debugfs_exit(struct dwc3 *d)
> diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
> index 7146ee2ac057..5dbbe53269d3 100644
> --- a/drivers/usb/dwc3/debugfs.c
> +++ b/drivers/usb/dwc3/debugfs.c
> @@ -886,30 +886,14 @@ static void dwc3_debugfs_create_endpoint_files(struct dwc3_ep *dep,
>  	}
>  }
>  
> -static void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep,
> -		struct dentry *parent)
> +void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep)
>  {
>  	struct dentry		*dir;
>  
> -	dir = debugfs_create_dir(dep->name, parent);
> +	dir = debugfs_create_dir(dep->name, dep->dwc->root);
>  	dwc3_debugfs_create_endpoint_files(dep, dir);
>  }
>  
> -static void dwc3_debugfs_create_endpoint_dirs(struct dwc3 *dwc,
> -		struct dentry *parent)
> -{
> -	int			i;
> -
> -	for (i = 0; i < dwc->num_eps; i++) {
> -		struct dwc3_ep	*dep = dwc->eps[i];
> -
> -		if (!dep)
> -			continue;
> -
> -		dwc3_debugfs_create_endpoint_dir(dep, parent);
> -	}
> -}
> -
>  void dwc3_debugfs_init(struct dwc3 *dwc)
>  {
>  	struct dentry		*root;
> @@ -940,7 +924,6 @@ void dwc3_debugfs_init(struct dwc3 *dwc)
>  				&dwc3_testmode_fops);
>  		debugfs_create_file("link_state", 0644, root, dwc,
>  				    &dwc3_link_state_fops);
> -		dwc3_debugfs_create_endpoint_dirs(dwc, root);
>  	}
>  }
>  
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 65d9b7227752..dbba31d415d7 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -2754,6 +2754,8 @@ static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum)
>  	INIT_LIST_HEAD(&dep->started_list);
>  	INIT_LIST_HEAD(&dep->cancelled_list);
>  
> +	dwc3_debugfs_create_endpoint_dir(dep);
> +
>  	return 0;
>  }
>  
> @@ -2797,6 +2799,7 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
>  			list_del(&dep->endpoint.ep_list);
>  		}
>  
> +		debugfs_remove_recursive(debugfs_lookup(dep->name, dwc->root));
>  		kfree(dep);
>  	}
>  }
> -- 
> 2.24.0
> 

-- 

Thanks,
Peter Chen


      parent reply	other threads:[~2021-06-02  0:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-29 19:29 [PATCH] usb: dwc3: debugfs: Add and remove endpoint dirs dynamically Jack Pham
2021-06-01  7:07 ` Peter Chen
2021-06-01 16:09   ` Jack Pham
2021-06-02  0:55 ` Peter Chen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210602005558.GA26785@nchen \
    --to=peter.chen@kernel.org \
    --cc=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jackp@codeaurora.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=rogerq@kernel.org \
    --cc=wcheng@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.