All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	afzal mohammed <afzal.mohd.ma@gmail.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Keerthy <j-keerthy@ti.com>, Tero Kristo <kristo@kernel.org>
Subject: [Backport for linux-5.4.y PATCH 1/4] ARM: OMAP: replace setup_irq() by request_irq()
Date: Wed,  2 Jun 2021 13:46:22 +0300	[thread overview]
Message-ID: <20210602104625.6079-1-tony@atomide.com> (raw)

From: afzal mohammed <afzal.mohd.ma@gmail.com>

Upstream commit b75ca5217743e4d7076cf65e044e88389e44318d backported for
stable linux-5.4.y to make it easier to apply dra7 timer errata patches.

request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/pm.c       | 13 ++++++-------
 arch/arm/mach-omap1/time.c     | 10 +++-------
 arch/arm/mach-omap1/timer32k.c | 10 +++-------
 arch/arm/mach-omap2/timer.c    | 11 +++--------
 4 files changed, 15 insertions(+), 29 deletions(-)

diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -596,11 +596,6 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_wakeup_irq = {
-	.name		= "peripheral wakeup",
-	.handler	= omap_wakeup_interrupt
-};
-
 
 
 static const struct platform_suspend_ops omap_pm_ops = {
@@ -613,6 +608,7 @@ static const struct platform_suspend_ops omap_pm_ops = {
 static int __init omap_pm_init(void)
 {
 	int error = 0;
+	int irq;
 
 	if (!cpu_class_is_omap1())
 		return -ENODEV;
@@ -656,9 +652,12 @@ static int __init omap_pm_init(void)
 	arm_pm_idle = omap1_pm_idle;
 
 	if (cpu_is_omap7xx())
-		setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
+		irq = INT_7XX_WAKE_UP_REQ;
 	else if (cpu_is_omap16xx())
-		setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+		irq = INT_1610_WAKE_UP_REQ;
+	if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup",
+			NULL))
+		pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
 
 	/* Program new power ramp-up time
 	 * (0 for most boards since we don't lower voltage when in deep sleep)
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -155,15 +155,11 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_mpu_timer1_irq = {
-	.name		= "mpu_timer1",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap_mpu_timer1_interrupt,
-};
-
 static __init void omap_init_mpu_timer(unsigned long rate)
 {
-	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
+	if (request_irq(INT_TIMER1, omap_mpu_timer1_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "mpu_timer1", NULL))
+		pr_err("Failed to request irq %d (mpu_timer1)\n", INT_TIMER1);
 	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
 
 	clockevent_mpu_timer1.cpumask = cpumask_of(0);
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -148,15 +148,11 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_32k_timer_irq = {
-	.name		= "32KHz timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap_32k_timer_interrupt,
-};
-
 static __init void omap_init_32k_timer(void)
 {
-	setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
+	if (request_irq(INT_OS_TIMER, omap_32k_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "32KHz timer", NULL))
+		pr_err("Failed to request irq %d(32KHz timer)\n", INT_OS_TIMER);
 
 	clockevent_32k_timer.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&clockevent_32k_timer,
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -91,12 +91,6 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap2_gp_timer_irq = {
-	.name		= "gp_timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap2_gp_timer_interrupt,
-};
-
 static int omap2_gp_timer_set_next_event(unsigned long cycles,
 					 struct clock_event_device *evt)
 {
@@ -382,8 +376,9 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
 				     &clockevent_gpt.name, OMAP_TIMER_POSTED);
 	BUG_ON(res);
 
-	omap2_gp_timer_irq.dev_id = &clkev;
-	setup_irq(clkev.irq, &omap2_gp_timer_irq);
+	if (request_irq(clkev.irq, omap2_gp_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "gp_timer", &clkev))
+		pr_err("Failed to request irq %d (gp_timer)\n", clkev.irq);
 
 	__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
 
-- 
2.31.1

             reply	other threads:[~2021-06-02 10:46 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-02 10:46 Tony Lindgren [this message]
2021-06-02 10:46 ` [Backport for linux-5.4.y PATCH 2/4] ARM: OMAP2+: Prepare timer code to backport dra7 timer wrap errata i940 Tony Lindgren
2021-06-08 17:13   ` Greg KH
2021-06-09  6:13     ` Tony Lindgren
2021-06-09  6:22       ` Greg KH
2021-06-09  6:58         ` Tony Lindgren
2021-06-09  7:31           ` Greg KH
2021-06-09  8:50             ` Tony Lindgren
2021-06-02 10:46 ` [Backport for linux-5.4.y PATCH 3/4] ARM: OMAP2+: Prepare to handle dra7 timer wrap issue Tony Lindgren
2021-06-02 10:46 ` [Backport for linux-5.4.y PATCH 4/4] ARM: OMAP2+: Handle dra7 timer wrap errata i940 Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210602104625.6079-1-tony@atomide.com \
    --to=tony@atomide.com \
    --cc=afzal.mohd.ma@gmail.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=j-keerthy@ti.com \
    --cc=kristo@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.