From: Rob Herring <robh@kernel.org>
To: Corentin Labbe <clabbe@baylibre.com>
Cc: daniel.lezcano@linaro.org, tglx@linutronix.de,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: timer: Convert faraday,fttmr010 to yaml
Date: Fri, 4 Jun 2021 16:11:19 -0500 [thread overview]
Message-ID: <20210604211119.GA3916166@robh.at.kernel.org> (raw)
In-Reply-To: <20210528185329.1969688-1-clabbe@baylibre.com>
On Fri, May 28, 2021 at 06:53:29PM +0000, Corentin Labbe wrote:
> Converts timer/faraday,fttmr010.txt to yaml.
>
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
> .../bindings/timer/faraday,fttmr010.txt | 38 --------
> .../bindings/timer/faraday,fttmr010.yaml | 86 +++++++++++++++++++
> 2 files changed, 86 insertions(+), 38 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/timer/faraday,fttmr010.txt
> create mode 100644 Documentation/devicetree/bindings/timer/faraday,fttmr010.yaml
>
> diff --git a/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt b/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt
> deleted file mode 100644
> index 3cb2f4c98d64..000000000000
> --- a/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt
> +++ /dev/null
> @@ -1,38 +0,0 @@
> -Faraday Technology timer
> -
> -This timer is a generic IP block from Faraday Technology, embedded in the
> -Cortina Systems Gemini SoCs and other designs.
> -
> -Required properties:
> -
> -- compatible : Must be one of
> - "faraday,fttmr010"
> - "cortina,gemini-timer", "faraday,fttmr010"
> - "moxa,moxart-timer", "faraday,fttmr010"
> - "aspeed,ast2400-timer"
> - "aspeed,ast2500-timer"
> - "aspeed,ast2600-timer"
> -
> -- reg : Should contain registers location and length
> -- interrupts : Should contain the three timer interrupts usually with
> - flags for falling edge
> -
> -Optionally required properties:
> -
> -- clocks : a clock to provide the tick rate for "faraday,fttmr010"
> -- clock-names : should be "EXTCLK" and "PCLK" for the external tick timer
> - and peripheral clock respectively, for "faraday,fttmr010"
> -- syscon : a phandle to the global Gemini system controller if the compatible
> - type is "cortina,gemini-timer"
> -
> -Example:
> -
> -timer@43000000 {
> - compatible = "faraday,fttmr010";
> - reg = <0x43000000 0x1000>;
> - interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
> - <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
> - <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
> - clocks = <&extclk>, <&pclk>;
> - clock-names = "EXTCLK", "PCLK";
> -};
> diff --git a/Documentation/devicetree/bindings/timer/faraday,fttmr010.yaml b/Documentation/devicetree/bindings/timer/faraday,fttmr010.yaml
> new file mode 100644
> index 000000000000..a495ea80c0fc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/faraday,fttmr010.yaml
> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: (GPL-2.0+)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/timer/faraday,fttmr010.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Faraday Technology timer
> +
> +maintainers:
> + - Linus Walleij <linus.walleij@linaro.org>
> +
> +description: |
> + This timer is a generic IP block from Faraday Technology, embedded in the
> + Cortina Systems Gemini SoCs and other designs.
> +
> +properties:
> + compatible:
> + oneOf:
> + - const: faraday,fttmr010
> + - items:
> + - const: cortina,gemini-timer
> + - const: faraday,fttmr010
> + - items:
> + - const: moxa,moxart-timer
> + - const: faraday,fttmr010
> + - const: aspeed,ast2400-timer
> + - const: aspeed,ast2500-timer
> + - const: aspeed,ast2600-timer
> +
> + reg:
> + maxItems: 1
> +
> + resets:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 3
> + description: Should contain the three timer interrupts usually with flags for falling edge
> +
> + clocks:
> + minItems: 2
> +
> + clock-names:
> + items:
> + - const: "PCLK"
> + - const: "EXTCLK"
> +
> + syscon:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + maxItems: 1
> +
> +if:
> + properties:
> + compatible:
> + contains:
> + items:
This is wrong because 'contains' should be a schema applying to a single
item whereas 'items' applies to the whole array.
> + - const: cortina,gemini-timer
Just this is enough.
> + - const: faraday,fttmr010
> +then:
> + required:
> + - syscon
> +else:
> + properties:
> + syscon: false
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + timer@43000000 {
> + compatible = "faraday,fttmr010";
> + reg = <0x43000000 0x1000>;
> + interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
> + <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
> + <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
> + clocks = <&extclk>, <&pclk>;
> + clock-names = "PCLK", "EXTCLK";
> + syscon = <&syscon>;
This should fail based on my read of the .txt binding.
> + };
> +...
> --
> 2.31.1
prev parent reply other threads:[~2021-06-04 21:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-28 18:53 [PATCH] dt-bindings: timer: Convert faraday,fttmr010 to yaml Corentin Labbe
2021-06-04 21:11 ` Rob Herring [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210604211119.GA3916166@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=clabbe@baylibre.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.