From: Trevor Woerner <twoerner@gmail.com>
To: U-Boot Mailing List <u-boot@lists.denx.de>
Subject: [PATCH v1 2/3] lpc32xx: import device tree from Linux
Date: Mon, 7 Jun 2021 00:33:23 -0400 [thread overview]
Message-ID: <20210607043324.3005-3-twoerner@gmail.com> (raw)
In-Reply-To: <20210607043324.3005-1-twoerner@gmail.com>
Import the dtsi, dts, and clock binding files for the lpc32xx ea3250 board
directly and unmodified from the latest Linux kernel.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
---
arch/arm/dts/lpc3250-ea3250.dts | 273 ++++++++++++
arch/arm/dts/lpc32xx.dtsi | 508 ++++++++++++++++++++++
include/dt-bindings/clock/lpc32xx-clock.h | 58 +++
3 files changed, 839 insertions(+)
create mode 100644 arch/arm/dts/lpc3250-ea3250.dts
create mode 100644 arch/arm/dts/lpc32xx.dtsi
create mode 100644 include/dt-bindings/clock/lpc32xx-clock.h
diff --git a/arch/arm/dts/lpc3250-ea3250.dts b/arch/arm/dts/lpc3250-ea3250.dts
new file mode 100644
index 0000000000..63c6f17bb7
--- /dev/null
+++ b/arch/arm/dts/lpc3250-ea3250.dts
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Embedded Artists LPC3250 board
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ */
+
+/dts-v1/;
+#include "lpc32xx.dtsi"
+
+/ {
+ model = "Embedded Artists LPC3250 board based on NXP LPC3250";
+ compatible = "ea,ea3250", "nxp,lpc3250";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x4000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ button {
+ label = "Interrupt Key";
+ linux,code = <103>;
+ gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
+ };
+
+ key1 {
+ label = "KEY1";
+ linux,code = <1>;
+ gpios = <&pca9532 0 0>;
+ };
+
+ key2 {
+ label = "KEY2";
+ linux,code = <2>;
+ gpios = <&pca9532 1 0>;
+ };
+
+ key3 {
+ label = "KEY3";
+ linux,code = <3>;
+ gpios = <&pca9532 2 0>;
+ };
+
+ key4 {
+ label = "KEY4";
+ linux,code = <4>;
+ gpios = <&pca9532 3 0>;
+ };
+
+ joy0 {
+ label = "Joystick Key 0";
+ linux,code = <10>;
+ gpios = <&gpio 2 0 0>; /* P2.0 */
+ };
+
+ joy1 {
+ label = "Joystick Key 1";
+ linux,code = <11>;
+ gpios = <&gpio 2 1 0>; /* P2.1 */
+ };
+
+ joy2 {
+ label = "Joystick Key 2";
+ linux,code = <12>;
+ gpios = <&gpio 2 2 0>; /* P2.2 */
+ };
+
+ joy3 {
+ label = "Joystick Key 3";
+ linux,code = <13>;
+ gpios = <&gpio 2 3 0>; /* P2.3 */
+ };
+
+ joy4 {
+ label = "Joystick Key 4";
+ linux,code = <14>;
+ gpios = <&gpio 2 4 0>; /* P2.4 */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* LEDs on OEM Board */
+
+ led1 {
+ gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
+ linux,default-trigger = "timer";
+ default-state = "off";
+ };
+
+ led2 {
+ gpios = <&gpio 2 10 1>; /* P2.10, active low */
+ default-state = "off";
+ };
+
+ led3 {
+ gpios = <&gpio 2 11 1>; /* P2.11, active low */
+ default-state = "off";
+ };
+
+ led4 {
+ gpios = <&gpio 2 12 1>; /* P2.12, active low */
+ default-state = "off";
+ };
+
+ /* LEDs on Base Board */
+
+ lede1 {
+ gpios = <&pca9532 8 0>;
+ default-state = "off";
+ };
+ lede2 {
+ gpios = <&pca9532 9 0>;
+ default-state = "off";
+ };
+ lede3 {
+ gpios = <&pca9532 10 0>;
+ default-state = "off";
+ };
+ lede4 {
+ gpios = <&pca9532 11 0>;
+ default-state = "off";
+ };
+ lede5 {
+ gpios = <&pca9532 12 0>;
+ default-state = "off";
+ };
+ lede6 {
+ gpios = <&pca9532 13 0>;
+ default-state = "off";
+ };
+ lede7 {
+ gpios = <&pca9532 14 0>;
+ default-state = "off";
+ };
+ lede8 {
+ gpios = <&pca9532 15 0>;
+ default-state = "off";
+ };
+ };
+};
+
+/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
+&adc {
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+
+ uda1380: uda1380@18 {
+ compatible = "nxp,uda1380";
+ reg = <0x18>;
+ power-gpio = <&gpio 3 10 0>;
+ reset-gpio = <&gpio 3 2 0>;
+ dac-clk = "wspll";
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ };
+
+ pca9532: pca9532@60 {
+ compatible = "nxp,pca9532";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x60>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+};
+
+&i2cusb {
+ clock-frequency = <100000>;
+
+ isp1301: usb-transceiver@2d {
+ compatible = "nxp,isp1301";
+ reg = <0x2d>;
+ };
+};
+
+&mac {
+ phy-mode = "rmii";
+ use-iram;
+ status = "okay";
+};
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+ transceiver = <&isp1301>;
+ status = "okay";
+};
+
+&sd {
+ wp-gpios = <&pca9532 5 0>;
+ cd-gpios = <&pca9532 4 0>;
+ cd-inverted;
+ bus-width = <4>;
+ status = "okay";
+};
+
+/* 128MB Flash via SLC NAND controller */
+&slc {
+ status = "okay";
+
+ nxp,wdr-clks = <14>;
+ nxp,wwidth = <260000000>;
+ nxp,whold = <104000000>;
+ nxp,wsetup = <200000000>;
+ nxp,rdr-clks = <14>;
+ nxp,rwidth = <34666666>;
+ nxp,rhold = <104000000>;
+ nxp,rsetup = <200000000>;
+ nand-on-flash-bbt;
+ gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mtd0@0 {
+ label = "ea3250-boot";
+ reg = <0x00000000 0x00080000>;
+ read-only;
+ };
+
+ mtd1@80000 {
+ label = "ea3250-uboot";
+ reg = <0x00080000 0x000c0000>;
+ read-only;
+ };
+
+ mtd2@140000 {
+ label = "ea3250-kernel";
+ reg = <0x00140000 0x00400000>;
+ };
+
+ mtd3@540000 {
+ label = "ea3250-rootfs";
+ reg = <0x00540000 0x07ac0000>;
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&uart6 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/lpc32xx.dtsi b/arch/arm/dts/lpc32xx.dtsi
new file mode 100644
index 0000000000..c87066d6c9
--- /dev/null
+++ b/arch/arm/dts/lpc32xx.dtsi
@@ -0,0 +1,508 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * NXP LPC32xx SoC
+ *
+ * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com>
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ */
+
+#include <dt-bindings/clock/lpc32xx-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "nxp,lpc3220";
+ interrupt-parent = <&mic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ reg = <0x0>;
+ };
+ };
+
+ clocks {
+ xtal_32k: xtal_32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xtal_32k";
+ };
+
+ xtal: xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <13000000>;
+ clock-output-names = "xtal";
+ };
+ };
+
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x00000000 0x10000000>,
+ <0x20000000 0x20000000 0x30000000>,
+ <0xe0000000 0xe0000000 0x04000000>;
+
+ iram: sram@8000000 {
+ compatible = "mmio-sram";
+ reg = <0x08000000 0x20000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x08000000 0x20000>;
+ };
+
+ /*
+ * Enable either SLC or MLC
+ */
+ slc: flash@20020000 {
+ compatible = "nxp,lpc3220-slc";
+ reg = <0x20020000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_SLC>;
+ status = "disabled";
+ };
+
+ mlc: flash@200a8000 {
+ compatible = "nxp,lpc3220-mlc";
+ reg = <0x200a8000 0x11000>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_MLC>;
+ status = "disabled";
+ };
+
+ dma: dma@31000000 {
+ compatible = "arm,pl080", "arm,primecell";
+ reg = <0x31000000 0x1000>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_DMA>;
+ clock-names = "apb_pclk";
+ };
+
+ usb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0x31020000 0x00001000>;
+
+ /*
+ * Enable either ohci or usbd (gadget)!
+ */
+ ohci: ohci@0 {
+ compatible = "nxp,ohci-nxp", "usb-ohci";
+ reg = <0x0 0x300>;
+ interrupt-parent = <&sic1>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usbclk LPC32XX_USB_CLK_HOST>;
+ status = "disabled";
+ };
+
+ usbd: usbd@0 {
+ compatible = "nxp,lpc3220-udc";
+ reg = <0x0 0x300>;
+ interrupt-parent = <&sic1>;
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH>,
+ <30 IRQ_TYPE_LEVEL_HIGH>,
+ <28 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>;
+ status = "disabled";
+ };
+
+ i2cusb: i2c@300 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x300 0x100>;
+ interrupt-parent = <&sic1>;
+ interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usbclk LPC32XX_USB_CLK_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ usbclk: clock-controller@f00 {
+ compatible = "nxp,lpc3220-usb-clk";
+ reg = <0xf00 0x100>;
+ #clock-cells = <1>;
+ };
+ };
+
+ clcd: clcd@31040000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x31040000 0x1000>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>;
+ clock-names = "clcdclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ mac: ethernet@31060000 {
+ compatible = "nxp,lpc-eth";
+ reg = <0x31060000 0x1000>;
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_MAC>;
+ status = "disabled";
+ };
+
+ emc: memory-controller@31080000 {
+ compatible = "arm,pl175", "arm,primecell";
+ reg = <0x31080000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>;
+ clock-names = "mpmcclk", "apb_pclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0 0xe0000000 0x01000000>,
+ <1 0xe1000000 0x01000000>,
+ <2 0xe2000000 0x01000000>,
+ <3 0xe3000000 0x01000000>;
+ status = "disabled";
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x20000000 0x20000000 0x30000000>;
+
+ /*
+ * ssp0 and spi1 are shared pins;
+ * enable one in your board dts, as needed.
+ */
+ ssp0: spi@20084000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x20084000 0x1000>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_SSP0>;
+ clock-names = "apb_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@20088000 {
+ compatible = "nxp,lpc3220-spi";
+ reg = <0x20088000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_SPI1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ /*
+ * ssp1 and spi2 are shared pins;
+ * enable one in your board dts, as needed.
+ */
+ ssp1: spi@2008c000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x2008c000 0x1000>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_SSP1>;
+ clock-names = "apb_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@20090000 {
+ compatible = "nxp,lpc3220-spi";
+ reg = <0x20090000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_SPI2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s0: i2s@20094000 {
+ compatible = "nxp,lpc3220-i2s";
+ reg = <0x20094000 0x1000>;
+ status = "disabled";
+ };
+
+ sd: sd@20098000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x20098000 0x1000>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+ <13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_SD>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ i2s1: i2s@2009c000 {
+ compatible = "nxp,lpc3220-i2s";
+ reg = <0x2009c000 0x1000>;
+ status = "disabled";
+ };
+
+ /* UART5 first since it is the default console, ttyS0 */
+ uart5: serial@40090000 {
+ /* actually, ns16550a w/ 64 byte fifos! */
+ compatible = "nxp,lpc3220-uart";
+ reg = <0x40090000 0x1000>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ clocks = <&clk LPC32XX_CLK_UART5>;
+ status = "disabled";
+ };
+
+ uart3: serial@40080000 {
+ compatible = "nxp,lpc3220-uart";
+ reg = <0x40080000 0x1000>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ clocks = <&clk LPC32XX_CLK_UART3>;
+ status = "disabled";
+ };
+
+ uart4: serial@40088000 {
+ compatible = "nxp,lpc3220-uart";
+ reg = <0x40088000 0x1000>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ clocks = <&clk LPC32XX_CLK_UART4>;
+ status = "disabled";
+ };
+
+ uart6: serial@40098000 {
+ compatible = "nxp,lpc3220-uart";
+ reg = <0x40098000 0x1000>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ clocks = <&clk LPC32XX_CLK_UART6>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@400a0000 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x400a0000 0x100>;
+ interrupt-parent = <&sic1>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk LPC32XX_CLK_I2C1>;
+ };
+
+ i2c2: i2c@400a8000 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x400a8000 0x100>;
+ interrupt-parent = <&sic1>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk LPC32XX_CLK_I2C2>;
+ };
+
+ mpwm: mpwm@400e8000 {
+ compatible = "nxp,lpc3220-motor-pwm";
+ reg = <0x400e8000 0x78>;
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+ };
+
+ fab {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x20000000 0x20000000 0x30000000>;
+
+ /* System Control Block */
+ scb {
+ compatible = "simple-bus";
+ ranges = <0x0 0x040004000 0x00001000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ clk: clock-controller@0 {
+ compatible = "nxp,lpc3220-clk";
+ reg = <0x00 0x114>;
+ #clock-cells = <1>;
+
+ clocks = <&xtal_32k>, <&xtal>;
+ clock-names = "xtal_32k", "xtal";
+ };
+ };
+
+ mic: interrupt-controller@40008000 {
+ compatible = "nxp,lpc3220-mic";
+ reg = <0x40008000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sic1: interrupt-controller@4000c000 {
+ compatible = "nxp,lpc3220-sic";
+ reg = <0x4000c000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&mic>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
+ <30 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ sic2: interrupt-controller@40010000 {
+ compatible = "nxp,lpc3220-sic";
+ reg = <0x40010000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&mic>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
+ <31 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ uart1: serial@40014000 {
+ compatible = "nxp,lpc3220-hsuart";
+ reg = <0x40014000 0x1000>;
+ interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart2: serial@40018000 {
+ compatible = "nxp,lpc3220-hsuart";
+ reg = <0x40018000 0x1000>;
+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart7: serial@4001c000 {
+ compatible = "nxp,lpc3220-hsuart";
+ reg = <0x4001c000 0x1000>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ rtc: rtc@40024000 {
+ compatible = "nxp,lpc3220-rtc";
+ reg = <0x40024000 0x1000>;
+ interrupt-parent = <&sic1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_RTC>;
+ };
+
+ gpio: gpio@40028000 {
+ compatible = "nxp,lpc3220-gpio";
+ reg = <0x40028000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <3>; /* bank, pin, flags */
+ };
+
+ timer4: timer@4002c000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x4002c000 0x1000>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk LPC32XX_CLK_TIMER4>;
+ clock-names = "timerclk";
+ status = "disabled";
+ };
+
+ timer5: timer@40030000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40030000 0x1000>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk LPC32XX_CLK_TIMER5>;
+ clock-names = "timerclk";
+ status = "disabled";
+ };
+
+ watchdog: watchdog@4003c000 {
+ compatible = "nxp,pnx4008-wdt";
+ reg = <0x4003c000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_WDOG>;
+ };
+
+ timer0: timer@40044000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40044000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_TIMER0>;
+ clock-names = "timerclk";
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ /*
+ * TSC vs. ADC: Since those two share the same
+ * hardware, you need to choose from one of the
+ * following two and do 'status = "okay";' for one of
+ * them
+ */
+
+ adc: adc@40048000 {
+ compatible = "nxp,lpc3220-adc";
+ reg = <0x40048000 0x1000>;
+ interrupt-parent = <&sic1>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_ADC>;
+ status = "disabled";
+ };
+
+ tsc: tsc@40048000 {
+ compatible = "nxp,lpc3220-tsc";
+ reg = <0x40048000 0x1000>;
+ interrupt-parent = <&sic1>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_ADC>;
+ status = "disabled";
+ };
+
+ timer1: timer@4004c000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x4004c000 0x1000>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk LPC32XX_CLK_TIMER1>;
+ clock-names = "timerclk";
+ };
+
+ key: key@40050000 {
+ compatible = "nxp,lpc3220-key";
+ reg = <0x40050000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_KEY>;
+ interrupt-parent = <&sic1>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer2: timer@40058000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40058000 0x1000>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk LPC32XX_CLK_TIMER2>;
+ clock-names = "timerclk";
+ status = "disabled";
+ };
+
+ pwm1: pwm@4005c000 {
+ compatible = "nxp,lpc3220-pwm";
+ reg = <0x4005c000 0x4>;
+ clocks = <&clk LPC32XX_CLK_PWM1>;
+ assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
+ assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@4005c004 {
+ compatible = "nxp,lpc3220-pwm";
+ reg = <0x4005c004 0x4>;
+ clocks = <&clk LPC32XX_CLK_PWM2>;
+ assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
+ assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
+ status = "disabled";
+ };
+
+ timer3: timer@40060000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40060000 0x1000>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk LPC32XX_CLK_TIMER3>;
+ clock-names = "timerclk";
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/include/dt-bindings/clock/lpc32xx-clock.h b/include/dt-bindings/clock/lpc32xx-clock.h
new file mode 100644
index 0000000000..e624d3a527
--- /dev/null
+++ b/include/dt-bindings/clock/lpc32xx-clock.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2015 Vladimir Zapolskiy <vz@mleia.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+#ifndef __DT_BINDINGS_LPC32XX_CLOCK_H
+#define __DT_BINDINGS_LPC32XX_CLOCK_H
+
+/* LPC32XX System Control Block clocks */
+#define LPC32XX_CLK_RTC 1
+#define LPC32XX_CLK_DMA 2
+#define LPC32XX_CLK_MLC 3
+#define LPC32XX_CLK_SLC 4
+#define LPC32XX_CLK_LCD 5
+#define LPC32XX_CLK_MAC 6
+#define LPC32XX_CLK_SD 7
+#define LPC32XX_CLK_DDRAM 8
+#define LPC32XX_CLK_SSP0 9
+#define LPC32XX_CLK_SSP1 10
+#define LPC32XX_CLK_UART3 11
+#define LPC32XX_CLK_UART4 12
+#define LPC32XX_CLK_UART5 13
+#define LPC32XX_CLK_UART6 14
+#define LPC32XX_CLK_IRDA 15
+#define LPC32XX_CLK_I2C1 16
+#define LPC32XX_CLK_I2C2 17
+#define LPC32XX_CLK_TIMER0 18
+#define LPC32XX_CLK_TIMER1 19
+#define LPC32XX_CLK_TIMER2 20
+#define LPC32XX_CLK_TIMER3 21
+#define LPC32XX_CLK_TIMER4 22
+#define LPC32XX_CLK_TIMER5 23
+#define LPC32XX_CLK_WDOG 24
+#define LPC32XX_CLK_I2S0 25
+#define LPC32XX_CLK_I2S1 26
+#define LPC32XX_CLK_SPI1 27
+#define LPC32XX_CLK_SPI2 28
+#define LPC32XX_CLK_MCPWM 29
+#define LPC32XX_CLK_HSTIMER 30
+#define LPC32XX_CLK_KEY 31
+#define LPC32XX_CLK_PWM1 32
+#define LPC32XX_CLK_PWM2 33
+#define LPC32XX_CLK_ADC 34
+#define LPC32XX_CLK_HCLK_PLL 35
+#define LPC32XX_CLK_PERIPH 36
+
+/* LPC32XX USB clocks */
+#define LPC32XX_USB_CLK_I2C 1
+#define LPC32XX_USB_CLK_DEVICE 2
+#define LPC32XX_USB_CLK_HOST 3
+
+#endif /* __DT_BINDINGS_LPC32XX_CLOCK_H */
--
2.30.0.rc0
next prev parent reply other threads:[~2021-06-07 4:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-07 4:33 [PATCH v1 0/3] lpc32xx updates Trevor Woerner
2021-06-07 4:33 ` [PATCH v1 1/3] lpc32xx: Kconfig: switch to CONFIG_CONS_INDEX Trevor Woerner
2021-06-07 4:33 ` Trevor Woerner [this message]
2021-06-07 4:33 ` [PATCH v1 3/3] arm: lpc32xx: add EA LPC3250 DevKitv2 board support Trevor Woerner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210607043324.3005-3-twoerner@gmail.com \
--to=twoerner@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.