All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hannes Reinecke <hare@suse.de>
To: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>,
	Keith Busch <keith.busch@wdc.com>,
	linux-nvme@lists.infradead.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCHv5] nvme: allow to re-attach namespaces after all paths are down
Date: Mon,  7 Jun 2021 15:34:35 +0200	[thread overview]
Message-ID: <20210607133435.138525-1-hare@suse.de> (raw)

We should only remove the ns head from the list of heads per
subsystem if the reference count drops to zero. Removing it
at the start of nvme_ns_remove() will prevent us from reattaching
the namespace to the correct ns head once a path becomes available
again.

Changes to v4:
- Call del_gendisk() in nvme_mpath_check_last_path() to avoid deadlock
Changes to v3:
- Simplify if() clause to detect duplicate namespaces
Changes to v2:
- Drop memcpy() statement
Changes to v1:
- Always check NSIDs after reattach

Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 drivers/nvme/host/core.c      | 13 +++++++++----
 drivers/nvme/host/multipath.c | 12 ++++++++++--
 drivers/nvme/host/nvme.h      | 11 ++---------
 3 files changed, 21 insertions(+), 15 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 177cae44b612..065edf20bef4 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -566,6 +566,9 @@ static void nvme_free_ns_head(struct kref *ref)
 	struct nvme_ns_head *head =
 		container_of(ref, struct nvme_ns_head, ref);
 
+	mutex_lock(&head->subsys->lock);
+	list_del_init(&head->entry);
+	mutex_unlock(&head->subsys->lock);
 	nvme_mpath_remove_disk(head);
 	ida_simple_remove(&head->subsys->ns_ida, head->instance);
 	cleanup_srcu_struct(&head->srcu);
@@ -3669,7 +3672,11 @@ static int nvme_init_ns_head(struct nvme_ns *ns, unsigned nsid,
 		head->shared = is_shared;
 	} else {
 		ret = -EINVAL;
-		if (!is_shared || !head->shared) {
+		/*
+		 * If multipath is enabled we might hit an ns head with no
+		 * paths, but that doesn't indicate it's a shared namespace.
+		 */
+		if (!list_empty(&head->list) && (!is_shared || !head->shared)) {
 			dev_err(ctrl->device,
 				"Duplicate unshared namespace %d\n", nsid);
 			goto out_put_ns_head;
@@ -3828,8 +3835,6 @@ static void nvme_ns_remove(struct nvme_ns *ns)
 
 	mutex_lock(&ns->ctrl->subsys->lock);
 	list_del_rcu(&ns->siblings);
-	if (list_empty(&ns->head->list))
-		list_del_init(&ns->head->entry);
 	mutex_unlock(&ns->ctrl->subsys->lock);
 
 	synchronize_rcu(); /* guarantee not available in head->list */
@@ -3849,7 +3854,7 @@ static void nvme_ns_remove(struct nvme_ns *ns)
 	list_del_init(&ns->list);
 	up_write(&ns->ctrl->namespaces_rwsem);
 
-	nvme_mpath_check_last_path(ns);
+	nvme_mpath_check_last_path(ns->head);
 	nvme_put_ns(ns);
 }
 
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 127a17b4c13d..de74650cdb2d 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -776,14 +776,22 @@ void nvme_mpath_add_disk(struct nvme_ns *ns, struct nvme_id_ns *id)
 #endif
 }
 
-void nvme_mpath_remove_disk(struct nvme_ns_head *head)
+void nvme_mpath_check_last_path(struct nvme_ns_head *head)
 {
 	if (!head->disk)
 		return;
-	if (head->disk->flags & GENHD_FL_UP) {
+
+	if (list_empty(&head->list) && (head->disk->flags & GENHD_FL_UP)) {
+		kblockd_schedule_work(&head->requeue_work);
 		nvme_cdev_del(&head->cdev, &head->cdev_device);
 		del_gendisk(head->disk);
 	}
+}
+
+void nvme_mpath_remove_disk(struct nvme_ns_head *head)
+{
+	if (!head->disk)
+		return;
 	blk_set_queue_dying(head->disk->queue);
 	/* make sure all pending bios are cleaned up */
 	kblockd_schedule_work(&head->requeue_work);
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 1f397ecba16c..812fc1d273e3 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -716,14 +716,7 @@ void nvme_mpath_uninit(struct nvme_ctrl *ctrl);
 void nvme_mpath_stop(struct nvme_ctrl *ctrl);
 bool nvme_mpath_clear_current_path(struct nvme_ns *ns);
 void nvme_mpath_clear_ctrl_paths(struct nvme_ctrl *ctrl);
-
-static inline void nvme_mpath_check_last_path(struct nvme_ns *ns)
-{
-	struct nvme_ns_head *head = ns->head;
-
-	if (head->disk && list_empty(&head->list))
-		kblockd_schedule_work(&head->requeue_work);
-}
+void nvme_mpath_check_last_path(struct nvme_ns_head *head);
 
 static inline void nvme_trace_bio_complete(struct request *req)
 {
@@ -772,7 +765,7 @@ static inline bool nvme_mpath_clear_current_path(struct nvme_ns *ns)
 static inline void nvme_mpath_clear_ctrl_paths(struct nvme_ctrl *ctrl)
 {
 }
-static inline void nvme_mpath_check_last_path(struct nvme_ns *ns)
+static inline void nvme_mpath_check_last_path(struct nvme_ns_head *head)
 {
 }
 static inline void nvme_trace_bio_complete(struct request *req)
-- 
2.29.2


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

             reply	other threads:[~2021-06-07 13:35 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-07 13:34 Hannes Reinecke [this message]
2021-06-08 16:42 ` [PATCHv5] nvme: allow to re-attach namespaces after all paths are down Christoph Hellwig
2021-06-08 17:44   ` Hannes Reinecke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210607133435.138525-1-hare@suse.de \
    --to=hare@suse.de \
    --cc=hch@lst.de \
    --cc=keith.busch@wdc.com \
    --cc=linux-nvme@lists.infradead.org \
    --cc=sagi@grimberg.me \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.