From: Florian Westphal <fw@strlen.de>
To: <netfilter-devel@vger.kernel.org>
Cc: Florian Westphal <fw@strlen.de>
Subject: [PATCH nf 1/2] selftests: netfilter: add fib test case
Date: Tue, 8 Jun 2021 13:48:17 +0200 [thread overview]
Message-ID: <20210608114818.23397-2-fw@strlen.de> (raw)
In-Reply-To: <20210608114818.23397-1-fw@strlen.de>
There is a bug report on netfilter.org bugzilla pointing to fib
expression dropping ipv6 DAD packets.
Add a test case that demonstrates this problem.
Next patch excludes icmpv6 packets coming from any to linklocal.
Signed-off-by: Florian Westphal <fw@strlen.de>
---
tools/testing/selftests/netfilter/Makefile | 2 +-
tools/testing/selftests/netfilter/nft_fib.sh | 221 +++++++++++++++++++
2 files changed, 222 insertions(+), 1 deletion(-)
create mode 100755 tools/testing/selftests/netfilter/nft_fib.sh
diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
index 3171069a6b46..cd6430b39982 100644
--- a/tools/testing/selftests/netfilter/Makefile
+++ b/tools/testing/selftests/netfilter/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
# Makefile for netfilter selftests
-TEST_PROGS := nft_trans_stress.sh nft_nat.sh bridge_brouter.sh \
+TEST_PROGS := nft_trans_stress.sh nft_fib.sh nft_nat.sh bridge_brouter.sh \
conntrack_icmp_related.sh nft_flowtable.sh ipvs.sh \
nft_concat_range.sh nft_conntrack_helper.sh \
nft_queue.sh nft_meta.sh nf_nat_edemux.sh \
diff --git a/tools/testing/selftests/netfilter/nft_fib.sh b/tools/testing/selftests/netfilter/nft_fib.sh
new file mode 100755
index 000000000000..6caf6ac8c285
--- /dev/null
+++ b/tools/testing/selftests/netfilter/nft_fib.sh
@@ -0,0 +1,221 @@
+#!/bin/bash
+#
+# This tests the fib expression.
+#
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+
+sfx=$(mktemp -u "XXXXXXXX")
+ns1="ns1-$sfx"
+ns2="ns2-$sfx"
+nsrouter="nsrouter-$sfx"
+timeout=4
+
+log_netns=$(sysctl -n net.netfilter.nf_log_all_netns)
+
+cleanup()
+{
+ ip netns del ${ns1}
+ ip netns del ${ns2}
+ ip netns del ${nsrouter}
+
+ [ $log_netns -eq 0 ] && sysctl -q net.netfilter.nf_log_all_netns=$log_netns
+}
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not run test without nft tool"
+ exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not run test without ip tool"
+ exit $ksft_skip
+fi
+
+ip netns add ${nsrouter}
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not create net namespace"
+ exit $ksft_skip
+fi
+
+trap cleanup EXIT
+
+dmesg | grep -q ' nft_rpfilter: '
+if [ $? -eq 0 ]; then
+ dmesg -c | grep ' nft_rpfilter: '
+ echo "WARN: a previous test run has failed" 1>&2
+fi
+
+sysctl -q net.netfilter.nf_log_all_netns=1
+ip netns add ${ns1}
+ip netns add ${ns2}
+
+load_ruleset() {
+ local netns=$1
+
+ip netns exec ${netns} nft -f /dev/stdin <<EOF
+table inet filter {
+ chain prerouting {
+ type filter hook prerouting priority 0; policy accept;
+ fib saddr . iif oif missing counter log prefix "$netns nft_rpfilter: " drop
+ }
+}
+EOF
+}
+
+load_ruleset_count() {
+ local netns=$1
+
+ip netns exec ${netns} nft -f /dev/stdin <<EOF
+table inet filter {
+ chain prerouting {
+ type filter hook prerouting priority 0; policy accept;
+ ip daddr 1.1.1.1 fib saddr . iif oif missing counter drop
+ ip6 daddr 1c3::c01d fib saddr . iif oif missing counter drop
+ }
+}
+EOF
+}
+
+check_drops() {
+ dmesg | grep -q ' nft_rpfilter: '
+ if [ $? -eq 0 ]; then
+ dmesg | grep ' nft_rpfilter: '
+ echo "FAIL: rpfilter did drop packets"
+ return 1
+ fi
+
+ return 0
+}
+
+check_fib_counter() {
+ local want=$1
+ local ns=$2
+ local address=$3
+
+ line=$(ip netns exec ${ns} nft list table inet filter | grep 'fib saddr . iif' | grep $address | grep "packets $want" )
+ ret=$?
+
+ if [ $ret -ne 0 ];then
+ echo "Netns $ns fib counter doesn't match expected packet count of $want for $address" 1>&2
+ ip netns exec ${ns} nft list table inet filter
+ return 1
+ fi
+
+ if [ $want -gt 0 ]; then
+ echo "PASS: fib expression did drop packets for $address"
+ fi
+
+ return 0
+}
+
+load_ruleset ${nsrouter}
+load_ruleset ${ns1}
+load_ruleset ${ns2}
+
+ip link add veth0 netns ${nsrouter} type veth peer name eth0 netns ${ns1} > /dev/null 2>&1
+if [ $? -ne 0 ];then
+ echo "SKIP: No virtual ethernet pair device support in kernel"
+ exit $ksft_skip
+fi
+ip link add veth1 netns ${nsrouter} type veth peer name eth0 netns ${ns2}
+
+ip -net ${nsrouter} link set lo up
+ip -net ${nsrouter} link set veth0 up
+ip -net ${nsrouter} addr add 10.0.1.1/24 dev veth0
+ip -net ${nsrouter} addr add dead:1::1/64 dev veth0
+
+ip -net ${nsrouter} link set veth1 up
+ip -net ${nsrouter} addr add 10.0.2.1/24 dev veth1
+ip -net ${nsrouter} addr add dead:2::1/64 dev veth1
+
+ip -net ${ns1} link set lo up
+ip -net ${ns1} link set eth0 up
+
+ip -net ${ns2} link set lo up
+ip -net ${ns2} link set eth0 up
+
+ip -net ${ns1} addr add 10.0.1.99/24 dev eth0
+ip -net ${ns1} addr add dead:1::99/64 dev eth0
+ip -net ${ns1} route add default via 10.0.1.1
+ip -net ${ns1} route add default via dead:1::1
+
+ip -net ${ns2} addr add 10.0.2.99/24 dev eth0
+ip -net ${ns2} addr add dead:2::99/64 dev eth0
+ip -net ${ns2} route add default via 10.0.2.1
+ip -net ${ns2} route add default via dead:2::1
+
+test_ping() {
+ local daddr4=$1
+ local daddr6=$2
+
+ ip netns exec ${ns1} ping -c 1 -q $daddr4 > /dev/null
+ ret=$?
+ if [ $ret -ne 0 ];then
+ check_drops
+ echo "FAIL: ${ns1} cannot reach $daddr4, ret $ret" 1>&2
+ return 1
+ fi
+
+ ip netns exec ${ns1} ping -c 3 -q $daddr6 > /dev/null
+ ret=$?
+ if [ $ret -ne 0 ];then
+ check_drops
+ echo "FAIL: ${ns1} cannot reach $daddr6, ret $ret" 1>&2
+ return 1
+ fi
+
+ return 0
+}
+
+ip netns exec ${nsrouter} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+
+sleep 3
+
+test_ping 10.0.2.1 dead:2::1 || exit 1
+check_drops || exit 1
+
+test_ping 10.0.2.99 dead:2::99 || exit 1
+check_drops || exit 1
+
+echo "PASS: fib expression did not cause unwanted packet drops"
+
+ip netns exec ${nsrouter} nft flush table inet filter
+
+ip -net ${ns1} route del default
+ip -net ${ns1} -6 route del default
+
+ip -net ${ns1} addr del 10.0.1.99/24 dev eth0
+ip -net ${ns1} addr del dead:1::99/64 dev eth0
+
+ip -net ${ns1} addr add 10.0.2.99/24 dev eth0
+ip -net ${ns1} addr add dead:2::99/64 dev eth0
+
+ip -net ${ns1} route add default via 10.0.2.1
+ip -net ${ns1} -6 route add default via dead:2::1
+
+ip -net ${nsrouter} addr add dead:2::1/64 dev veth0
+
+# switch to ruleset that doesn't log, this time
+# its expected that this does drop the packets.
+load_ruleset_count ${nsrouter}
+
+# ns1 has a default route, but nsrouter does not.
+# must not check return value, ping to 1.1.1.1 will
+# fail.
+check_fib_counter 0 ${nsrouter} 1.1.1.1 || exit 1
+check_fib_counter 0 ${nsrouter} 1c3::c01d || exit 1
+
+ip netns exec ${ns1} ping -c 1 -W 1 -q 1.1.1.1 > /dev/null
+check_fib_counter 1 ${nsrouter} 1.1.1.1 || exit 1
+
+sleep 2
+ip netns exec ${ns1} ping -c 3 -q 1c3::c01d > /dev/null
+check_fib_counter 3 ${nsrouter} 1c3::c01d || exit 1
+
+exit 0
--
2.31.1
next prev parent reply other threads:[~2021-06-08 11:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-08 11:48 [PATCH nf 0/2] netfilter: nft_fib: ignore icmpv6 packets from :: Florian Westphal
2021-06-08 11:48 ` Florian Westphal [this message]
2021-06-08 11:48 ` [PATCH nf 2/2] netfilter: ipv6: skip ipv6 packets from any to link-local Florian Westphal
2021-06-09 19:08 ` [PATCH nf 0/2] netfilter: nft_fib: ignore icmpv6 packets from :: Pablo Neira Ayuso
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210608114818.23397-2-fw@strlen.de \
--to=fw@strlen.de \
--cc=netfilter-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.