From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 04/28] target/arm: Diagnose UNALLOCATED in disas_simd_three_reg_same_fp16
Date: Tue, 15 Jun 2021 16:43:41 +0100 [thread overview]
Message-ID: <20210615154405.21399-5-peter.maydell@linaro.org> (raw)
In-Reply-To: <20210615154405.21399-1-peter.maydell@linaro.org>
From: Richard Henderson <richard.henderson@linaro.org>
This fprintf+assert has been in place since the beginning.
It is after to the fp_access_check, so we need to move the
check up. Fold that in to the pairwise filter.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210604183506.916654-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/translate-a64.c | 82 +++++++++++++++++++++++---------------
1 file changed, 50 insertions(+), 32 deletions(-)
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index 9bb15ca6189..7f74d0e81a9 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -11989,12 +11989,57 @@ static void disas_simd_three_reg_same(DisasContext *s, uint32_t insn)
*/
static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn)
{
- int opcode, fpopcode;
- int is_q, u, a, rm, rn, rd;
- int datasize, elements;
- int pass;
+ int opcode = extract32(insn, 11, 3);
+ int u = extract32(insn, 29, 1);
+ int a = extract32(insn, 23, 1);
+ int is_q = extract32(insn, 30, 1);
+ int rm = extract32(insn, 16, 5);
+ int rn = extract32(insn, 5, 5);
+ int rd = extract32(insn, 0, 5);
+ /*
+ * For these floating point ops, the U, a and opcode bits
+ * together indicate the operation.
+ */
+ int fpopcode = opcode | (a << 3) | (u << 4);
+ int datasize = is_q ? 128 : 64;
+ int elements = datasize / 16;
+ bool pairwise;
TCGv_ptr fpst;
- bool pairwise = false;
+ int pass;
+
+ switch (fpopcode) {
+ case 0x0: /* FMAXNM */
+ case 0x1: /* FMLA */
+ case 0x2: /* FADD */
+ case 0x3: /* FMULX */
+ case 0x4: /* FCMEQ */
+ case 0x6: /* FMAX */
+ case 0x7: /* FRECPS */
+ case 0x8: /* FMINNM */
+ case 0x9: /* FMLS */
+ case 0xa: /* FSUB */
+ case 0xe: /* FMIN */
+ case 0xf: /* FRSQRTS */
+ case 0x13: /* FMUL */
+ case 0x14: /* FCMGE */
+ case 0x15: /* FACGE */
+ case 0x17: /* FDIV */
+ case 0x1a: /* FABD */
+ case 0x1c: /* FCMGT */
+ case 0x1d: /* FACGT */
+ pairwise = false;
+ break;
+ case 0x10: /* FMAXNMP */
+ case 0x12: /* FADDP */
+ case 0x16: /* FMAXP */
+ case 0x18: /* FMINNMP */
+ case 0x1e: /* FMINP */
+ pairwise = true;
+ break;
+ default:
+ unallocated_encoding(s);
+ return;
+ }
if (!dc_isar_feature(aa64_fp16, s)) {
unallocated_encoding(s);
@@ -12005,31 +12050,6 @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn)
return;
}
- /* For these floating point ops, the U, a and opcode bits
- * together indicate the operation.
- */
- opcode = extract32(insn, 11, 3);
- u = extract32(insn, 29, 1);
- a = extract32(insn, 23, 1);
- is_q = extract32(insn, 30, 1);
- rm = extract32(insn, 16, 5);
- rn = extract32(insn, 5, 5);
- rd = extract32(insn, 0, 5);
-
- fpopcode = opcode | (a << 3) | (u << 4);
- datasize = is_q ? 128 : 64;
- elements = datasize / 16;
-
- switch (fpopcode) {
- case 0x10: /* FMAXNMP */
- case 0x12: /* FADDP */
- case 0x16: /* FMAXP */
- case 0x18: /* FMINNMP */
- case 0x1e: /* FMINP */
- pairwise = true;
- break;
- }
-
fpst = fpstatus_ptr(FPST_FPCR_F16);
if (pairwise) {
@@ -12152,8 +12172,6 @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn)
gen_helper_advsimd_acgt_f16(tcg_res, tcg_op1, tcg_op2, fpst);
break;
default:
- fprintf(stderr, "%s: insn 0x%04x, fpop 0x%2x @ 0x%" PRIx64 "\n",
- __func__, insn, fpopcode, s->pc_curr);
g_assert_not_reached();
}
--
2.20.1
next prev parent reply other threads:[~2021-06-15 15:47 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-15 15:43 [PULL 00/28] target-arm queue Peter Maydell
2021-06-15 15:43 ` [PULL 01/28] hw/intc/arm_gicv3_cpuif: Tolerate spurious EOIR writes Peter Maydell
2021-06-15 15:43 ` [PULL 02/28] target/arm: Diagnose UNALLOCATED in disas_simd_two_reg_misc_fp16 Peter Maydell
2021-06-15 15:43 ` [PULL 03/28] target/arm: Remove fprintf from disas_simd_mod_imm Peter Maydell
2021-06-15 15:43 ` Peter Maydell [this message]
2021-06-15 15:43 ` [PULL 05/28] hw: virt: consider hw_compat_6_0 Peter Maydell
2021-06-15 15:43 ` [PULL 06/28] hw/arm: add quanta-gbs-bmc machine Peter Maydell
2021-06-15 15:43 ` [PULL 07/28] hw/arm: quanta-gbs-bmc add i2c comments Peter Maydell
2021-06-15 15:43 ` [PULL 08/28] hw/intc/armv7m_nvic: Remove stale comment Peter Maydell
2021-06-15 15:43 ` [PULL 09/28] hw/acpi: Provide stub version of acpi_ghes_record_errors() Peter Maydell
2021-06-15 15:43 ` [PULL 10/28] hw/acpi: Provide function acpi_ghes_present() Peter Maydell
2021-06-15 15:43 ` [PULL 11/28] target/arm: Use acpi_ghes_present() to see if we report ACPI memory errors Peter Maydell
2021-06-15 15:43 ` [PULL 12/28] target/arm: Fix mte page crossing test Peter Maydell
2021-06-15 15:43 ` [PULL 13/28] hw/arm: gsj add i2c comments Peter Maydell
2021-06-15 15:43 ` [PULL 14/28] hw/arm: gsj add pca9548 Peter Maydell
2021-06-15 15:43 ` [PULL 15/28] hw/arm: quanta-q71l add pca954x muxes Peter Maydell
2021-06-15 15:43 ` [PULL 16/28] target/arm: Provide and use H8 and H1_8 macros Peter Maydell
2021-06-15 15:43 ` [PULL 17/28] target/arm: Enable FPSCR.QC bit for MVE Peter Maydell
2021-06-15 15:43 ` [PULL 18/28] target/arm: Handle VPR semantics in existing code Peter Maydell
2021-06-15 15:43 ` [PULL 19/28] target/arm: Add handling for PSR.ECI/ICI Peter Maydell
2021-06-15 15:43 ` [PULL 20/28] target/arm: Let vfp_access_check() handle late NOCP checks Peter Maydell
2021-06-15 15:43 ` [PULL 21/28] target/arm: Implement MVE LCTP Peter Maydell
2021-06-15 15:43 ` [PULL 22/28] target/arm: Implement MVE WLSTP insn Peter Maydell
2021-06-15 15:44 ` [PULL 23/28] target/arm: Implement MVE DLSTP Peter Maydell
2021-06-15 15:44 ` [PULL 24/28] target/arm: Implement MVE LETP insn Peter Maydell
2021-06-15 15:44 ` [PULL 25/28] target/arm: Add framework for MVE decode Peter Maydell
2021-06-15 15:44 ` [PULL 26/28] target/arm: Move expand_pred_b() data to vec_helper.c Peter Maydell
2021-06-15 15:44 ` [PULL 27/28] bitops.h: Provide hswap32(), hswap64(), wswap64() swapping operations Peter Maydell
2021-06-15 15:44 ` [PULL 28/28] include/qemu/int128.h: Add function to create Int128 from int64_t Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210615154405.21399-5-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.