Re: [PATCH 1/3] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Add DT bindings for RZ/G2L pinctrl

[Rob Herring <robh@kernel.org>]

On Wed, Jun 16, 2021 at 02:26:39PM +0100, Lad Prabhakar wrote:
> Add device tree binding documentation and header file for Renesas
> RZ/G2L pinctrl.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
>  .../pinctrl/renesas,rzg2l-pinctrl.yaml        | 121 ++++++++++++++++++
>  include/dt-bindings/pinctrl/pinctrl-rzg2l.h   |  16 +++
>  2 files changed, 137 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
>  create mode 100644 include/dt-bindings/pinctrl/pinctrl-rzg2l.h
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> new file mode 100644
> index 000000000000..e8ab5a0a46b3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> @@ -0,0 +1,121 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L combined Pin and GPIO controller
> +
> +maintainers:
> +  - Geert Uytterhoeven <geert+renesas@glider.be>
> +
> +description:
> +  The Renesas SoCs of the RZ/G2L series feature a combined Pin and GPIO
> +  controller.
> +  Pin multiplexing and GPIO configuration is performed on a per-pin basis.
> +  Each port features up to 8 pins, each of them configurable for GPIO function
> +  (port mode) or in alternate function mode.
> +  Up to 8 different alternate function modes exist for each single pin.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
> +
> +  reg:
> +    maxItems: 1
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    const: 2
> +    description:
> +      The first cell contains the global GPIO port index, constructed using the
> +      RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/pinctrl-rzg2l.h> and the
> +      second cell represents consumer flag as mentioned in ../gpio/gpio.txt
> +      E.g. "RZG2L_GPIO(39, 1)" for P39_1.
> +
> +  gpio-ranges:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +additionalProperties:
> +  anyOf:
> +    - type: object

Define a node name pattern for child nodes to match on rather than using 
'additionalProperties'. '-pins$' for example.


> +      allOf:
> +        - $ref: pincfg-node.yaml#
> +        - $ref: pinmux-node.yaml#
> +
> +      description:
> +        Pin controller client devices use pin configuration subnodes (children
> +        and grandchildren) for desired pin configuration.
> +        Client device subnodes use below standard properties.
> +
> +      properties:
> +        phandle: true
> +        function: true
> +        groups: true
> +        pins: true
> +        bias-disable: true
> +        bias-pull-down: true
> +        bias-pull-up: true
> +        drive-strength:
> +          enum: [ 2, 4, 8, 12 ]
> +        power-source:
> +          enum: [ 1800, 2500, 3300 ]
> +        slew-rate: true
> +        gpio-hog: true
> +        gpios: true
> +        input-enable: true
> +        output-high: true
> +        output-low: true
> +        line-name: true
> +
> +      additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - gpio-controller
> +  - '#gpio-cells'
> +  - gpio-ranges
> +  - clocks
> +  - power-domains
> +  - resets
> +
> +examples:
> +  - |
> +    #include <dt-bindings/pinctrl/pinctrl-rzg2l.h>
> +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> +
> +    pinctrl: pinctrl@11030000 {
> +            compatible = "renesas,r9a07g044l-pinctrl";
> +            reg = <0x11030000 0x10000>;
> +
> +            gpio-controller;
> +            #gpio-cells = <2>;
> +            gpio-ranges = <&pinctrl 0 0 392>;
> +            clocks = <&cpg CPG_MOD R9A07G044_CLK_GPIO>;
> +            resets = <&cpg R9A07G044_CLK_GPIO>;
> +            power-domains = <&cpg>;
> +
> +            scif0_pins: scif0 {
> +                    groups = "scif0_data";
> +                    function = "scif0";
> +            };
> +
> +            sd1-pwr-en-hog {
> +                    gpio-hog;
> +                    gpios = <RZG2L_GPIO(39, 2) 0>;
> +                    output-high;
> +                    line-name = "sd1_pwr_en";
> +            };
> +    };
> diff --git a/include/dt-bindings/pinctrl/pinctrl-rzg2l.h b/include/dt-bindings/pinctrl/pinctrl-rzg2l.h
> new file mode 100644
> index 000000000000..d285d9e8c60a
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/pinctrl-rzg2l.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/*
> + * This header provides constants for Renesas RZ/G2{L,LC} pinctrl bindings.
> + *
> + * Copyright (C) 2021 Renesas Electronics Corp.
> + *
> + */
> +
> +#ifndef __DT_BINDINGS_PINCTRL_RZG2L_H
> +#define __DT_BINDINGS_PINCTRL_RZG2L_H
> +
> +#define RZG2L_PINS_PER_PORT	8
> +
> +#define RZG2L_GPIO(port, pos)	((port) * RZG2L_PINS_PER_PORT + (pos))
> +
> +#endif /* __DT_BINDINGS_PINCTRL_RZG2L_H */
> -- 
> 2.17.1